Creative Living SPK01 Bluetooth Wireless Speaker User Manual
- June 9, 2024
- Creative Living
Table of Contents
SPK01 Bluetooth Wireless Speaker
** User Manual**
SPK01 Bluetooth Wireless Speaker
Thank you for choosing our company’s Bluetooth wireless speaker. In order to let you have a good experience , we provide the detailed instructions, so you can get the product information, use methods and so on, please read the instructions carefully before you use it.
Notes:
In order to use the player correctly for user and ensure good performance of
the player, please carefully read and comply with the following content:
- Do not hit the main engine seriously;
- Do not contact benzene, diluent and other chemicals;
- Please stay away from strong magnetic and electric fields;
- Avoid direct light or hot appliances;
- Do not disassemble, repair and transform yourself;
- Do not listen at a loud volume to avoid adverse effects on your hearing;
- Dispose of discarded packaging, batteries, and electronic products properly;
-
Functional characteristics
[Bluetooth audio] Bluetooth 5.0+EDR ，Maximum reception distance is 15 meters [TWS series] With stereo series function. -
Music operation
The machine automatically detects and recognizes external devices when it is turned on, and enters Bluetooth mode after it is turned on -
Function definition of buttons and jacks
Based on actual objects -
Indicator light introduction
Green indicator: The green indicator blinks and turns off after the audio source device is connected; -
Bluetooth connection method
1 、 You will sound “Welcome WOSAIC” after startup, and the LED indicator will blink quickly. At the same time, the device that has been connected within the effective distance of the surrounding area will be searched and automatically connected;
2 、Turn on the Bluetooth function of your mobile device (phone, computer and so on) and search for Bluetooth device “WOSAIC ****”
3、Click it manually, and the device will automatically match and connect. If the connection is successful, a “Connected” voice will be issued；
4 、Devices that have been paired will be automatically connected the next time ；
FAQ
1 、 Q ：The horn is silent. ？****
A ：1.Determine whether the Bluetooth mode is connected .
2 、Whether the volume of external audio source is turned on (like mobile
phone).
Q ：Bluetooth does not automatically connect？****
A ：Only paired devices will automatically connect, otherwise you can only manually search and link.
Technical specifications
Output power：Less than 6W wireless
Working voltage ：DC12V
Frequency response：100Hz-18KHz
Signal Noise Ratio ：≥80dBA
Degree of distortion ： ＜1%
Audio input：Bluetooth
MP3 ：bit rate ，32Kbps-320Kbps
Loudspeaker unit：Four inches, 15W, 4Ω
input sensitivity ：450±50mV
Weight：About720g
Size ：75D×42Hmm
Packing accessories
Speaker ：1 Set
Instruction manual: 1 piece
Certification: 1 Piece
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.