SIEMENS BT300-KEYPAD Door Keypad Mounting Kit Instruction Manual
- June 9, 2024
- SIEMENS
Table of Contents
SIEMENS BT300-KEYPAD Door Keypad Mounting Kit
Door Keypad Mounting Kit – Mounting Instructions
Introduction
The Door Keypad is used for the same purpose as the standard control keypad.
It is installed on the door of a switchgear cabinet.
For the installation, you need the following parts (see picture below
):
- Screws (4 pcs)
- Data cable with attached grounding cable
- Panel adapter kit (packaged). See manual in package for components.
- Door keypad base
Make sure that you have received all necessary parts!
Mounting procedure
APPENDIX
Information in this document is based on specifications believed correct at
the time of publication. The right is reserved to make changes as design
improve-ments are introduced. Product or company names mentioned herein may be
the trademarks of their respective owners.
© 2013 Siemens Industry, Inc.
Siemens Industry, Inc. Building Technologies Division 1000 Deerfield Parkway
Buffalo Grove, IL 60089-4513 USA
1-847-215-1000
Your feedback is important to us. If you have comments about this document,
please send them to
sbt_technical.editor.us.sbt@siemens.com.