ACT AC7047 USB-C 4K Multiport Docking Station MST and Power Delivery Instruction Manual
- June 9, 2024
- ACT
Table of Contents
ACT AC7047 USB-C 4K Multiport Docking Station MST and Power Delivery
Introduction
Congratulations with the purchase of this high-quality ACT product! This product has undergone extensive testing by ACT’s technical experts. Should you experience any problems with this product, you are covered by ACT warranty. Please keep this manual and the receipt in a safe place
Register your product now on www.act-connectivity.com and receive product updates!
Packing contents
The following parts need to be present in the packing:
- AC7047
- Power adapter
- USB-C to C cable
- Quick Installation Guide
Connections
Front
- 1x USB-C female notebook connection (connect this port to the USB-C connector of your notebook
- 1x USB-C 3.2 Gen1 female (5Gbps)
- 1x USB-A 3.2 Gen1 female (5Gbps)
- 1x 3.5mm jack headset female (headphone + mic)
- 1x SD/micro SD card reader
Rear
- 1x DC power supply
- 1x USB-C female PD Pass-through port (connect your USB-C charger to charge your notebook)
- 2x HDMI 2.0 female port (connect your HDMI monitor) to this HDMI port
- 1x DisplayPort female port(connect your DP monitor(s)) to these DP ports
- 2x USB-A 3.2gen1 female
- 1x Gigabit LAN RJ45 female port
Connect the AC7047
- Connect the plug of the power supply to the DC connector of the docking station and then connect the other end of the power supply into the wall outlet.
- Connect the supplied USB-C cable to the USB-C host connector on the docking station and the other end to the USB-C connector of your computer.
- Connect the docking station to your HDMI and DP display(s)
- Connect the docking station to:
- USB peripherals
- Audio devices
- Gigabit Ethernet
Monitor setup
Your USB-C device needs to support DP-Alternate mode or Thunderbolt™3 on its USB-C port in order to display your video output to 1 or more displays. Check the technical specifications of your USB-C device if it supports DP-Alternate mode or Thunderbolt™3. If the device does not support DP-Alternate mode or Thunderbolt™3, the AC7047 will not be able to display video onto your Display(s).
Please Note!!! For the AC7047 to be able to display the max resolution of
4K on all three monitors your PC/Notebook needs to support additionally DP1.4
and DSC please check the technical specs of your PC/Notebook if DSC and DP1.4
is supported.
Single Monitor
For the single monitor setup, the AC7047 Docking station supports a max.
resolution of 4K @ 60Hz via HDMI or DisplayPort (DP).
Dual Monitor (SST/MST)
For the dual monitor setup, the AC7047 Docking station supports a max.
resolution of 4K @ 60Hz on HDMI or DisplayPort (DP).
Triple Monitor (SST/MST)
For the triple monitor setup, the AC7047 Docking station supports a max.
resolution of 1x 4K @ 30Hz on HDMI or DisplayPort (DP) and the 2nd and 3rd
monitor on 1080P @ 60Hz if DSC is not supported by your laptop. If your laptop
does support DSC you will be able to use a max. resolution of 4K @ 30Hz on all
three displays
SST (Single Stream Transport)
With SST (Single Stream Transport) the connected screens will only show a
clone (copy) of your main screen on the connected screens.
MST (Multi Stream Transport)
- MST is part of the DisplayPort 1.2 standard, with which monitors and computers can support “daisy-chaining”. You usually recognize daisy-chaining when the monitor has both a DisplayPort input and output. You can connect the first monitor to the computer and the second monitor to the first monitor. If both the monitor and the computer support MST daisy-chaining, the two screens work as separate screens. Exactly as if they were connected directly to the computer.
- If your notebook supports DP alt mode (DisplayPort alternate mode) it also supports MST. In this case the AC7047 will work as a USB-C to MST adapter. You will be able to use the multiple video outputs. The connected screens will be recognized as separate screens on your laptop / PC and can be used as an extended desktop.
- Windows 10 has a short key to switch between the different display modes:
- Use : “Windows key + P” an overview of display modes is displayed on your screen
Please Note!!! MacOS does not support MST Daisy chaining. MacOS only
supports Daisy chaining with the Thunderbolt™3 standard. So the AC7047 will
not provide the desired result for macOS devices. In this case the connected
screens only show a clone (copy) of your main screen on the connected screens
also called SST (Single Stream Transport).
Power Delivery
The AC7047 supports Power Delivery (PD) on the USB-C port. This protocol
enables your notebook to be charged safely over one single USB-C cable. One
footnote: all devices within the power chain must support Power Delivery.
Including the USB-C cables. The devices and cables have built-in chips that
communicate with each other to decide the best PD profile to ensure a safe
power delivery.
For example, if you connect a 45.0W USB-C charger to the AC7047 (supports PD
profiles up to 100.0W) and your notebook supports a USB-C PD profile of max.
65.0W. The max. power that will be provided to your notebook is 45.0W.
If for some reason in the example above, the USB-C cable is exchanged by a
USB-C cable which does not support PD (no built-in chip), your notebook will
not be charged.
Besides this all, USB-C with PD enables charging in two directions. For
example, you can charge your smartphone with your tablet, but also your tablet
with your smartphone.
Which Power Delivery profiles are available? 5.0V, 9.0V, 12.0V, 15.0V and
20.0V.
What max. Power Delivery profiles are supported by the AC7047:
| 5.0V | 3.0A | 15.0W |
|---|---|---|
| 9.0V | 3.0A | 27.0W |
| 12.0V | 3.0A | 36.0W |
| 15.0V | 3.0A | 45.0W |
| 20.0V | 5.0A | 100.0W |
Frequently Asked Questions and other related information
The latest Frequently asked questions for your product can be found on the support page of your product. ACT will update these pages frequently to assure you have the most recent information. Visit www.act- connectivity.com for more information about your product.
Service and support
This user manual has been carefully written by ACT’s technical experts. If you have problems installing or using the product, please check the support link at the website www.act-connectivity.com.
Warning and points of attention
- Due to laws, directives and regulations set out by the European parliament, some (wireless) devices could be subject to limitations concerning its use in certain European member states. In certain European member states the use of such devices could be prohibited. Contact your (local) government for more information about this limitations.
- Always follow up the instructions in the manual*, especially where it concerns devices which need to be assembled.
- Warning: In most cases this concerns an electronic device. Wrong/improper use may lead to (severe) injuries!
- When you connect the device to the mains, make sure it will not be damaged or subject to (high) pressure.
- A power socket is needed which should be close and easy accessible from the device.
- Repairing of the device should be done by qualified ACT staff. Never try to repair the device yourself. The warranty immediately voids when products have undergone self-repair and/or by misuse.
- For extended warranty conditions, please visit our website at www.act-connectivity.com
- Dispose of the device appropriately. Please follow your countries regulation for the disposal of electronic goods.
Please check below safety points carefully:
- Do not apply external force on the cables
- Do not unplug the device by pulling the power cable
- Do not place the device near heating elements
- Do not let the device come in contact with water of other liquids
- If there is any strange sound, smoke or odor, remove the device immediately from the power outlet.
- Do not put any sharp objects into the venting hole of a product
- Do not use any damaged cables (risk of electric shock)
- Keep the product out of reach of children
- Wipe off the product with soft fabric, not water mop.
- Keep the power plug and outlet clean
- Do not unplug the device form the power outlet with wet hands
- Unplug the device when you don’t use it for a long time
- Use the device at a well ventilated place
Tip : ACT manuals are written with great care. However, due to new technological developments it can happen that a printed manual does not longer contain the most recent information. If you are experiencing any problems with the printed manual or you cannot find what you are looking for, please always check our website www.act-connectivity.com first for the newest updated manual. Frequently asked questions (FAQ). Consult support on our website www.act-connectivity.com and see if you can find the right information about your product here. It is highly advisable to consult the FAQ section first, the answer is often here
Warranty conditions
The ACT warranty applies to all ACT products. After buying a second-hand ACT
product the remaining period of warranty is measured from the moment of
purchase by the product’s initial owner. ACT warranty applies to all ACT
products and parts, indissolubly connected or mounted to the product it
concerns. Power supply adapters, batteries, antennas and all other products
not directly integrated in or connected to the main product or products of
which, without reasonable doubt, can be assumed that wear and tear during use
will show a different pattern than the main product, are not covered by the
ACT warranty. Products are not covered by the ACT warranty when exposed to
incorrect/improper use, external influences or when opening the service parts
of the product by parties other than ACT. ACT may use refurbished materials
for repair or replacement of your defective product. ACT cannot be held
responsible for changes in network settings by internet providers. We cannot
guarantee that the ACT networking product will keep working when settings are
changed by the internet providers. ACT cannot guarantee the working of web
services, apps and other third party content that is available through ACT
products
When my product gets defective Should you encounter a product rendered
defective for reasons other than described above: Please contact your point of
purchase for taking care of your defective product
Trademarks : all brand names are trademarks and/or registered of their
respective holders. The information contained in this document has been
created with the utmost care. No legal rights can be derived from these
contents. ACT cannot be held responsible, nor liable for the information
contained in this document.
www.act-connectivity.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>