GRILLTIDER 005.421.87 Oven Glove Instruction Manual
- June 9, 2024
- GRILLTIDER
Table of Contents
005.421.87 Oven Glove
Instruction Manual
005.421.87 Oven Glove
Design Hanna Klarqvist
This oven glove has been tested in accordance with EN ISO 21420:2020 and EN 407:2020, EU Regulation 2016/425 and Regulation 2016/425 on personal protective equipment, as amended to apply in GB.
Designation
Oven glove for private use, Risk category II as per EU Regulation 2016/425 and Regulation 2016/425 on personal protective equipment, as amended to apply in GB.
Use
The oven glove is designed to be worn for protection against thermal risks
associated with removing hot items from ovens (contact heat) of the types
usually used in domestic environment. Ambidextrous.
The oven glove is intended to be used in dry condition.
Glove should be inspected prior to each use and damaged gloves should be
replaced.
Size
One size.
Relevant applicable European standards
This oven glove is designed to offer protection against contact heat, at
performance level 2, and complies with relevant requirements in EN ISO 21420:
2020 and EN 407:2020.
Limited flame spread: X
Contact heat: 2
Convective heat: X
Radiant heat: X
Small splashes of molten: X
Large quantities of molten: X
X is used for tests that where not tested.
Performance levels
Contact heat: performance 2 (threshold time minimum 15 s when exposed to
a temperature of 250°C).
The oven glove is not specifically designed to offer protection for limited
flame spread, convective heat, and radiant heat, small splashes of molten
metal and large quantities of molten metal.
Limitations
Keep away from naked flame and fire.
The oven glove protects only the area of the hand covered by the glove while
in use.
Number of cleaning cycles
The acceptable number of cleaning cycles following the provided care
instructions: 5.
The stated acceptable number of cleaning cycles is not the only factor
related to the lifetime of the product.
The lifetime also depend on usage, care, storage, etc.
Notified body
EU: INTERTEK ITALIA SPA
Via Guido Miglioli, 2/A – 20063
Cernusco sul Naviglio (MI) – Italia (2575)
Approved body
UK: ITS Testing Services (UK) Ltd, Centre Court, Meridian Business Park,
Leicester, LE19 1WD, Approved Body no AB0362.
To view the Declaration of Conformity for this product go to
IKEA.com, search your article number and find the document
under “Assembly & documents”.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>