eMAG DA00175 Tower Radiator User Manual
- June 9, 2024
- EMAG
Table of Contents
eMAG DA00175 Tower Radiator
Thank you for choosing our product, we hope you enjoy using it for a long time.
DESCRIPTION
This three-functional, modern design tower radiator fan is an essential
accessory for apartments, cold rooms, and dormitory rooms. An elegant-looking,
compact-sized tower heater with a practical handle, so it can be easily
carried to any room. Thanks to the adjustable power in two stages, you can
easily set the heating strength you need. Thanks to the built-in thermostat,
it can also be suitable for full heating of smaller rooms periodically. The
oscillation function ensures an even distribution of warm air in the room.
With additional fan function, you can even use it in the summer heat as a fan
to move the air in your room. As a result, the place will be much more livable
and pleasant in the hot weather. Thanks to the sensor located on the sole, the
device switches off automatically in the event of tipping over or overheating.
BEFORE USE, PLEASE READ THE FOLLOWING USER GUIDE CAREFULLY AND ADHERE TO ITS CONTENTS!
SAFETY WARNINGS
GENERAL ADVICE
Please keep the packaging of the device away from children, as it may lead to
suffocation. The device can only be used by adults, the storage location must
be chosen in such a way that children cannot accidentally access it. Children
must not play with the device. The device may only be used for its intended
purpose! During use, take care of the health and safety of those around you
(especially children). The device may only be used by persons who have read
and understood this user manual and are able to operate the device
accordingly! Persons with reduced mental, physical or sensory abilities may
not use the device! Do not use the device if it has previously been dropped or
bumped against something and it is visibly damaged! The safety equipment must
be used as intended, it is strictly forbidden to modify or eliminate them!
Unplug the device from the mains socket before any maintenance. Carry out
maintenance and adjustment according to the instruction manual supplied with
the device. Maintenance work must not be done by children!
RISK OF ELECTRIC SHOCK
Never operate the device with moist, wet hands! Touching the device, including
its mains plug and cable, with wet hands is strictly prohibited! The device
must only be connected to alternating current with the correct voltage. Do not
use the device near wet places (bath, shower, pool, sink). Only connect the
device to a mains socket that the safe operation you are convinced of, or
which was installed by a specialist according to the IEC 60364-1 standard. The
device is not suitable for use in rooms with high humidity. Before each use,
make sure that the device and the network cable and connector are undamaged!
Only undamaged devices may be operated! Do not use, if you notice any damage
to the device, contact a specialist service! During use, take care of the
integrity of the mains cable, avoid edges and objects that may cause damage to
the surface of the cable. Avoid the use of extension cables and distributors,
because they are a source of danger during operation. Always disconnect the
device from the mains when not in use. Maintenance work may only be done with
the mains plug unplugged.
OPERATION
The device is equipped with a metal mesh, which is designed to protect the blades and your physical integrity. The metal grid may overheat during prolonged use! Please avoid touching it to avoid burns! It is strictly forbidden to touch the device with any object! It is forbidden to rotate the upper part of the device with the help of external force! Do not use the device near flammable objects and materials. Make sure that the device is at least 50 cm away from all other objects. (walls, curtains, etc.) Do not cover the device with any material! The manufacturer and the distributor are not responsible for damages resulting from improper use or operation. If the device falls over, it switches off immediately for safety reasons.
USER’S GUIDE
Before using the device, carefully read the following user guide and the
section containing safety warnings! During use, proceed as described here!
Please keep this guide for future use. If you lend the device to someone else,
please include this documentation.
The device is designed for residential use! It is forbidden to disassemble or modify the device! In the event of a malfunction, contact a specialist who can only repair the device with original parts! Please follow the safety instructions
FIRST USE
Remove all factory packaging from the device. Check that the device is stable and can be used safely. The smell at first use you might notice is due to the lubricants used during production. It is a natural phenomenon that disappears after a few minutes of use.
FUNCTION SELECTION / TIMING
The device can be controlled with a rotary switch, thus ensuring easy and simple use.
Cool” : By turning the switch to the right, in the „Cool” position, the device functions as a fan. In this case, no heating takes place, the device moves the ambient air.
Low”: By turning the switch to the right, in the „Low” position, the device performs low-power heating. In this case, the device heats its environment with lower performance and energy consumption.
High”: By turning the switch to the right, in the „High” position, the device tries to heat the ambient air with maximum power. The device performs the fastest possible heating in this mode with higher energy consumption.
On the left side of the function selection rotary switch on the device, you can achieve the same functions with the oscillation function (90°). In this case, the device performs the requested operation with a continuous right-left rotating movement.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>