WINSTON PORTER Y000333 Emiliyana Steel Garden Bench User Manual
- June 9, 2024
- WINSTON PORTER
Table of Contents
WINSTON PORTER Y000333 Emiliyana Steel Garden Bench
Part Identification
Not actual size
PARTS
Hardware List
Actual size
STEP 1
Attach the seat (D) to the arm (A) by bolts (E) with washers (G) and nuts(H}
through the pre-drilled holes on the arm and the pre-drilled holes on the
seat. Repeat steps for the other side arm (B}. Part A is different from Part
B. This Park bench would fail to assemble if the installation position of Part
A and Part Bis were reversed. Please swap the Part A and Part Band then
reassemble them, if you fail to assemble them.
_ IMPORTANT: _Do not tighten screws completely until all parts are assembled in place.
STEP2
Attach the back (C) to the arm (A) by Installation bolts (F) with washers (G) through the pre-drilled holes on the arm into the pre-welded nuts on the back. Repeat step for the other side arm(B).
STEP 3: Tighten all the bolts with the wrench and the alien wrench ,and turn the bench to the upright position. Your bench is now ready for use, so relax & enjoy!
Maximum Loads
WARNING: This item is only suitable within the specified maximum load- bearing. Heavier loads than the indicated load capacity may cause instability, resulting in possible injuries.