ACT AC7810 HDMI Extender Set Tot 60 Meter Installation Guide

ACT AC7810 HDMI Extender Set Tot 60 Meter Installation Guide

Instructions

1. Connect the HDMI input source to the transmitter unit using a HDMI cable.
2. Connect the CAT output of the transmitter to the CAT input of the receiver using a CAT cable with a length of 60m (max).
3. Connect the HDMI display device (such as HDTV) to the HDMI output port.
4. Connect the IR TX cable to “IR TX” port of the transmitter; Connect the IR RX cable to “IR RX” port of the receiver.
5. Connect the DC side from one power adapter into the transmitter unit and one power adapter into receiver unit and connect the AC side of both the power supply into the wall outlet.
   

Safety Instruction

For PLUGGABLE EQUIPMENT, the socket-outlet shall be installed near the equipment and shall be easily accessible

For service, manuals, firmware or updates visit www.act- connectivity.com

You can find safety information at www.act-connectivity.com/safety

For ERP/ECO design 2019/1782/EU Compliant statement visitwww.act- connectivity.com/AC7810
Input: 100-240VA’50/60Hz, 0.3A Max.
Power 5.0W Max.
www.act.connectivity.com

References

• Business Listing and Review Management | Connectivity
• Home | ACT
• HDMI extender set, single Cat6, 60 meter, 3D and IR support | ACT

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>