POMIACAM SNO-Q5S-4G Solar Power Bullet Camera User Manual
- June 9, 2024
- Pomiacam
Table of Contents
SNO-Q5S-4G Solar Power Bullet Camera
User Manual
SNO-Q5S-4G Solar Power Bullet Camera
- Before using the product, please read the Quick Guide carefully and keep it well.
- This instruction manual is for reference only.
Packing List
After opening the package, please check the low-power wireless battery camera ( the “Equipment’) to verify whether the following parts are complete.
Appearance
WiFi function introduction
Reset/On &off
Under the power-on state,pressing the switch button for a long time, the
device will auto matically switch mode when the tone is heard, and the AP mode
w ill sound . After entering the AP mode, the red indicator light flashes
slowly. You can use the mobile phone WIFI to search for the device SSID. The
default connection password is 12345678. After Accessing WIFI, and add the
device by scanning the QR code. The default device password is admin, After
the device is added and connected s uccessfully, entering the setting
interface and click the synchronization time button to sync your phone’s time
with the device.
USB Interface
The battery of the equipment is charged through the USB interface, When
connected USB the equipment will be automatically turned on
Speaker
Used to send out a system prompting sound and achieve voice dialogue
AP Switch:
Under the power on state, press and hold the reset button for 3 seconds,
and the “drop” sound will be heard, and the device will be restored t o the
factory settings. If it is in the AP mode, the factory settings will be
restored. The device will return to the default WIFI mode. After the device is
restarted, the blue indicator light starts to flash.In the power-on state,
long press the reset button for 3 seconds t o hear the tone and then let go,
continue to press for more than 8 seconds, you will hear the shutdown tone,
then let go, the device enters the shutdown state.
TF Card Slot
The user can insert 8G, 16G, 32G 64G SD card (Please use branded card with
C10 and above) to store video image files
Power Button
Press and hold for 3 seconds t o shut off, you can hear the horn sound; In
sleep mode, press briefly for 1 second to wake up the device; Under the blue
light working condition, short press 1 second to push message
4G function introduction
TF Card Slot
The user can in sert 8G, 16G, 32G 64G SD card (Please use branded card with
C10 and above) t o store video image files
SIM (4G) Card Slot
Users can insert 4G SIM card or 4G flow card
Speaker
Used t o send out a system prompting sound and achieve voice dialogue
Reset Button
When the Equipment is working, press this button for 5 seconds to reset to
the default settings
USB Interface
The battery of the equipment is charged through the USB interface, When
connected USB the equipment will be automatically turned on
Power Button
Press and hold for 3 seconds to shut off, you can hear the horn sound; In
sleep mode, press briefly for 1 second to wake up the device; Under the blue
light working condition, short press 1 second to push message
Battery Compartment
Youcan install two 18650 batteries (please note the positive and negative
direction, the negative electrode is facing outward), You do not haveto
connect the equipment to the wire power, Just the batteries will power the
equipment
MIC
Used to collect ambient sound and achieve vocal dialogue
IR LED
Inthe event of inadequate ambient light, turn on the IR LED to increase the
brightness
Lens
Used to collect the image and video
Solar panel
Solar panels permanently charge the battery
PIR
PIR supported, when someone is at the effective distance of the camera,
warning information is immediately pushed to the cell phone app
WiIFi/ Indicator Lights
Red light always on: Network connection failed;Red light is always on:
Network connection failed; The blue light is always on: The device is
connected successfully and working
AG/Indicator Lights
Red light always on: Network connection failed;
Red light is always on: Network connection failed;
The blue light is always on: The device is connected successfully and working
Installation Guide
As shown in the figure, install the stand
- Use the screws in the mounting kit to fit the bracket on the wall
- Mounting 18650 specification batteries (Only 1pcs battery can also be used. Pay attention to the positive and negative electrodes)
- Cover the battery cover, push down and lock the security screws t o complete the installation
- Fixed the camera with brakect
APP INSTALLATION
- Scan the following QR codes or seach for “UBox” from the App Store(for iOS devices) or Google Play Store (for Android smartphones) t o download and install the app.
http://app.ubianet.com/app/ubox
APP REGISTRATION
-
Open the app then input your E-mail address then press ‘Register’. Check and select t o agree the agreement then your E-mail box will get an verification mail.
( For better user’s experience, please allow to open all permissions to avoid missing any notifications from the app.)
-
Set the login password and confrim the login password. Then press ‘Register’ t o next step. (For your password safety, the password requires more than 8 characters plus combination of letters)
-
We send averify mail to you, go to your mail box click the link to complete the verification.
-
Enter your E-mail address, and password , click login.
(APP will auto fill the account infomaion)
WI-FI CONNECTION
-
Press ‘Add Family’ then set the room or position as per reminders.
-
Enter your family name and then press ‘Next’.
-
Input the necessary information just like Country, Province, then press ‘Done’.
-
Press ‘Add a device’ to add a smart device
-
Connect the device with power supply, and make sure your mobile phone _ is connected toan available Wi-Fi. Then press ‘Setup device’.
-
After the power on the device, wait for the device bule LED are blinking Which means your device in pairing mode
-
If the device blue are not blinking, please press the power/Call key to wake up the device first, then hold and press the RESET button until the blue indicator
to light up and then release. The device will reboot and enter the pairing state. -
Give device a name and select the device adress before setup . the APP have a defult name . after confirmed , go to next step.
-
The app will input the Wi-Fi name automatically, please input the correct Wi-Fi Password. Then you can choose the ‘QR code configuration’ or ‘Sound wave configuration’ .
-
QR code configuration: Select the QR code configuration then the mobile phone display a QR code. Use the device t o scan t o the QR code 10cm away from the mobile phone.
4UBIA8ubia180182c6aa01a8c082c6aa01a8c0
-
The device will enter t o the device list automatically. Setup success! The device is ready to use.
-
Notes about PIR detection
*User can change the PIR detection sensitivity in device setings.we recommend t o set sensitivity at “Disabled” or “Low” to reduce flase alret and save the battery power i n noisy environments.
- Disabled: disabled PIR detection.
Low: deleay 7 seconds PIR detects a moving.
Medium: deleay 5 seconds PIR detects a moving.
*High: deleay 1 second PIR detects a moving.
USING THE APP
Click the ‘ Calendar’ icon on the right top corner, then choose the date to playback the vicoes from cloud storage.
Choose the desired date to check all videos from the cloud.
SPECIAL NOTES!
-
The device is equipped with a rechargeable lithium battery. The battery life will be affected by the device wake-up time and the number o f wake-ups. Therefore, the PIR sensor alarm detection function is used ina n environment with a lot of people. Itis recommended to turn off or set the device t o low sensitivity to reduce device wake-up and call times extend battery life. When the battery is low, please charge the battery immediately.
-
Keep the device in range o f your router.
Make sure the device is placed close to the Wi-Fi router. If there has to be thick or insulated objects between the device and the Wi-Fi router, which may lead to weak Wi-Fi signal, please make sure the Wi-Fi signal is in good level before you start using the device. -
Itisa delicated device with low power consumption design . Everytime the device is awakened and will work for few seconds. After that, the device will enter standy mode to save power. You can set the work time in the app settings.
-
Because the mainland China does not receive Google’s system pus h messages, you need to open the app’s self-starting function in your phone t o receive push messages.
-
This device provides one month of free cloud storage andf ace recognition services. If you need to continue using value-added services after the trial period e xpires, you need to purchase them in the app.
Introduction to Functions
| 18650 battery can be used for 6 months in standby situation
---|---
HD pixels matched with wide-angle lens
Cell phone waking up supported
Clear two-way audio
PIR supported.When someone is wandering outdoors, warning information is
immediately pushed to the cell phone app
Automatic switching of Day/Night/Full Color, all with clear
pictures,safeguarding you and your family members
Cloud-storage supported
Solar panel permanently charging
Tip: There will be no further notification of any change of the above functions. Please take the actual object as the standard. Thanks!
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>