Havit I99 TWS Wireless Earbuds bluetooth Earphones Hall-effect Switch Touch Control Instructions Manual

: June 4, 2024
: havit

Table of Contents

Havit

Havit

Havit I99 TWS Wireless Earbuds Bluetooth Earphones Hall-effect Switch

Touch Control

Havit-I99-TWS-Wireless-Earbuds-Bluetooth-Earphones-Hall-effect-Switch-Touch-
Control

Specifications

BLUETOOTH VERSION: V5.0
WIRELESS WORKING RANGE3: 10M (without obstacles)
INPUT VOLTAGE/CURRENT: DC 5V/1A
EARBUD BATTERY: 40mAh*2(Fully charged in 1.5H)
CHARGING CASE BATTERY: 450mAh
PLAY TIME: 4H (in medium vol.)
TALK TIME: 4H (in medium vol.)
CHARGING TIME: 1.5H
WATERPROOF: IPX5

Introduction

It is tech for in-ear detection. the hall-effect switch. It Charges quickly with Type-C. it has Amazing Sound Quality. You can Play, pause, adjust the volume, and skip tracks while listening to music on the go by using the touch sensor in the earphones.

WHAT’S IN THE BOX

1* Havit I99 TWS Wireless Earbuds with Charging Box
2 pairs of Eartips
1* Type-C Charging Cable
1* Manual

HOW TO USE

Activate the two earbuds. The device is ready for use when the right earbud indication flashes white and orange and the left earbud indicator stops flashing white. 2. Turn on Bluetooth on your smartphone and choose “HAVIT I99” in accordance with the instructions on your phone.

HOW TO WEAR

Put the earbud tips in your ear canal and twist the headphones into position to wear them. To do this, gently pull up on the top of your ears. Making ensuring the headphones are positioned correctly and firmly in the ear canal is made simple by doing this.

HOW TO CHARGE

Connect the charging case to an approved wall charger or USB power source. The charging case and earbuds take around two hours to fully charge. Note: Charge times may be greater with uncertified chargers.

HOW TO CHARGE WITHOUT A CHARGER

Wireless earbuds can be charged using a power bank, laptops, or computers, or you can use a power bank. The laptop and earbuds can be connected via the USB wire.

HOW TO KNOW WHEN EARBUDS ARE FULLY CHARGED

When the earphones are appropriately inserted into the charging case, the charging case will begin to charge.
While charging, the earphones’ indicator light will become RED.
When completely charged, the earbuds’ indication light will switch off.

HOW TO RESET

Modify your current mode (e.g. switch to RX mode if you were using TX mode originally)
Restart the gadget, but don’t connect the headphones just yet.
Switch off the gadget.
Return to the default mode.
Reboot, then pair your headphones once more.

Frequently Asked Questions

TWS earbuds are water resistant.

When you’re exercising, the headphones can withstand perspiration or rain splashes thanks to their IPX7 waterproof classification.

I don’t have the case, but can I charge my earbuds?

TWS headsets are available that may be charged without a case. However, they also offer a capability that allows the device to be charged or connected to a USB input through a special connection.

Should I always have earbuds on hand?

The majority of cases have a lithium-ion battery that keeps the earphones charging until they are fully charged. The earbuds should always be kept on hand just in case.

Can I charge the case and my earbuds at the same time?

Fortunately, you can charge your case and headphones simultaneously. Open the earphone charging case that was included with your headphones first. Put the buds in the case’s respective slots. Next, secure the lid.

Can my TWS be charged without earbuds?

No, there isn’t enough evidence to charge them.

Why just one of my earbuds is playing music?

Depending on the audio settings on your headset, it might only play in one ear. So make sure the mono option is off in your audio properties by checking your audio properties. Make sure the voice levels on both earbuds are balanced as well.

What occurs if one earphone malfunctions?

Try twisting and taping the cord to restore sound if a single earbud periodically loses sound. If twisting the wire doesn’t work, you might have to open the earbud and, if you can, solder the connection. You might occasionally need to purchase new earbuds.

Why won’t my earbuds charge?

Ensure that they are placed correctly on the charging case or stand. Some headphones are charged through a stand or case that has a cord attached to it rather than directly through a cable. If you experience this, check that your headphones are set up correctly so that they can receive a proper charge.

How do you turn on your earbuds?

Pull down the phone’s top shade on an Android device, then long-press the Bluetooth icon. It will immediately take you to the Bluetooth menu, where you may enable it and then start looking for devices. To link a pair of headphones, tap their name.

Why do earbuds lose power so quickly?

The most common reasons why earphones and earbuds quit working are cable tension, incorrect wiring from the manufacturer, moisture damage, and damage to the sound drivers. These incidents could result in audio shorts or a total disconnect between the drivers and the audio source.