IL FANALE 212.17.OV TABIA Wall Light Instruction Manual
- June 9, 2024
- IL FANALE
Table of Contents
IS.CE.R00
TABIÁ DESIGN BY DT STUDIO
1 x MAX 10W LED | E14| 220-240 V 50/60 Hz
CODE 212.17
IP 20| | | | |
USE APPROPRIATE DOWELS AND SCREWS (NOT SUPPLIED)
N = blue | L = brown | **** | = yellow / green |
---|
REMARKS / KEY GUIDE
FOR THE INSTALLATION AND THE MAINTENCE OF THIS APPLIANCE, PLEASE CONTACT A
QUALIFIED PROFESSIONAL.
The appliance safety is only guaranteed if the following instructions are
respected during both installation and use; it is therefore necessary to keep
them.
– Keep the original box until the warranty period, in case of dispute the
appliance must be returned with the original packaging.
– After removing the packaging, check the integrity of the appliance. If this
is not the case, or if you are in doubt, do not use the appliance and contact
your dealer.
BEFORE INSTALLATION AND IN CASES OF MAINTENANCE, ENSURE THAT THE POWER SUPPLY HAS BEEN SHUT OFF TO THE APPLIANCE.
– Before connecting the power supply make sure that the plate information
corresponds to those of the electrical distribution network.
– Il Fanale Group is not responsible for any damage caused by an appliance
that needs to be grounded and is installed in an electrical system that is not
grounded.
– Il Fanale Group is not responsible for damages caused from a noncompliant
installation of its products.
– The appliance cannot be modified or tampered with in any way; any
modification may compromise its safety and making it dangerous. Il Fanale
group is not responsible for modified products.
– Do not exceed the maximum electrical power indicated in the technical data.
– In the case of failure or malfunction contact your dealer.
BRASS OR COPPER OUTDOOR LUMINAIRES: METALS UNDERGO AN ACCELERATED OXIDATION TREATMENT THAT GIVES A PARTICULAR AGEING COATING, CALLED “ANTICATO”. THE OXIDATION PROCESS OF THE DEVICES LASTS OVER TIME REACHING A MATURATION LEVEL DUE TO WEATHERING AGENTS OF THE AREA, BY ACQUIRING A TYPICAL NATURAL OXIDATION DARK COLOUR.
ANTIQUE IRON OUTDOOR LUMINAIRES: THE COMPANY ADDS A LAYER OF TRANSPARENT PAINT THAT SLOWS DOWN OXIDATION PROCESS.
LED VERSIONS: the light source cannot be replaced by the client. for information contact your dealer.
The use of the WEEE symbol indicates that this product may not be treated as household waste. By ensuring this product is disposed of correctly, you will help protect the environment. For more detailed information about the recycling of this product, please contact your local authority, your household waste disposal service provider or the shop where you purchased the product.
CLEANING: before carrying out any cleaning or maintenance, switch off the appliance and disconnect from the electrical distribution network and let stand until it has cooled.
WARNING!
– Do not use alcohol or solvents when cleaning.
– Do not remove the labels affixed which contain important technical
specifications of the lighting fixture.
- IRON OR COR-TEN OUTDOOR APPLIANCES (PAINTED): only use a soft cloth moistened with water and mild soap.
- BRASS AND COPPER OUTDOOR APPLIANCES: only use a soft cloth and liquid wax.
The finishing of this item is a totally handcrafted processing. The inhomogeneity is a distinctive element and an exclusive value of a “unique” product.
| Class I
---|---
| Class II
| Class III
| Luminaire designed to be used only with self shielded lamps.
| Luminaires not suitables for covering with thermally insulating material.
| Replace any cracked protective shield.
| Luminaires not suitable for direct mounting on normally flammable surfaces
(suitable only for mounting on non-combustible surfaces).
| Minimum distance from lighted objects (metres).
| Do not stare at the light source.
IP20| Ordinary.
IP3X| Protected against solid objects greater than 2.5 mm.
IP4X| Protected against solid objects greater than 1 mm.
IP5X| Dust-proof.
IP6X| Dust-tight.
IPX1| Drip-proof.
IPX3| Rain-proof.
IPX4| Splash-proof.
IPX5| Jet-proof.
IPX6| Powerfull water jet-proof.
IPX7| Watertight (immersible).
IPX8| Pressure-watertight (submersible).
Il Fanale Group S.r.l. Via Olivo Bredariol, 15 – 31048 San Biagio di Callalta (TV) Italy – T +39 0422 895200 – info@ilfanale.com – www.ilfanale.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>