Speaka PROFESSIONAL SP-TVC-700 Cart 2619435 TV Trolley User Manual
- June 9, 2024
- Speaka PROFESSIONAL
Table of Contents
Speaka PROFESSIONAL SP-TVC-700 Cart 2619435 TV Trolley User Manual
Safety Instructions
Intended use
The product is a TV cart. A suitable TV (or other monitor) can be mounted to the cart. The product is intended for indoor use only. Do not use it outdoors.
If you use the product for purposes other than those described, the product may be damaged. Improper use can result in hazards.
The product complies with the statutory national and European requirements.
For safety and approval purposes, you must not rebuild and/or modify the product.
Read the safety instructions and any accompanying instructions carefully and store them in a safe place. Make this product available to third parties only together with the safety instructions and any accompanying instructions.
All company names and product names are trademarks of their respective owners. All rights reserved.
Latest product information
Download the latest product information at www.conrad.com/downloads or scan the QR code shown. Follow the instructions on the website.
Description of symbols
The following symbols are on the product/appliance or are used in the text:
The symbol warns of hazards that can lead to personal injury.
This symbol warns of objects that can fall over and cause serious personal injury or death.
Safety instructions
vRead this document and the accompanying operating instructions carefully and especially observe the safety information. If you do not follow the safety instructions and information on proper handling, we assume no liability for any resulting personal injury or damage to property. Such cases will invalidate the warranty/guarantee.
General
- The product is not a toy. Keep it out of the reach of children and pets.
- Do not leave packaging material lying around carelessly. This may become dangerous playing material for children.
- If you have questions which remain unanswered by this information product, contact our technical support service or other technical personnel.
- Maintenance, modifications and repairs must only be completed by a technician or an authorised repair centre.
Sharp edges
- Edges of the product can be sharp and cause cuts if touched or rubbed against. Handle sharp edges very carefully. If necessary, wear protective gloves.
Before assembly and installation
- The monitor must have a suitable mounting device (example: VESA mount). An improperly mounted monitor can fall down and cause injury. Ensure the monitor is suitable before you mount it. Check the instructions that came with the monitor.
Assembly and installation
- The monitor is heavy. Lifting heavy weights can cause injury. Install the product together with another person.
- Route cables in such a way that they cannot get jammed, bent, or tripped over.
- Over-tightening the screws may cause damage to the threading and can impair the strength of screw connections. Do not over-tighten the screws.
Do not misuse
- Do not sit, stand, hang onto, or support yourself on the product. The product can collapse or fall over and cause injury.
- Do not hang objects onto the product. The product can collapse or fall over and cause injury.
Do not overload
- The product can collapse if overloaded and cause serious personal injury. Observe the maximum payload given in the product specifications.
Use
- Jerky adjustment or movement can make the product tip over and cause injury o product damage. Adjust and move the product carefully.
- Tighten brakes (if available) after moving in place.
Maintenance
- Adjusting and moving the product can cause the screw connections to get loose over time. Components can fall down or fall off and cause injury. Check all screw connections from time to time.
Technical data
Payload (max.) ………………………… 55 kg (Monitor)
5 kg (Shelf)
1 kg (Camera tray)
Monitor size ……………………………… 81.30 cm (32″) – 190.50 cm (75″)
Caster with brake………………………. Yes
Weight (approx.) ………………………. 11.9 kg
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirsch au (www.conrad.com).
All rights including translation reserved. Reproduction by any method (e.g.
photocopying, microfilming or the capture in
electronic data processing systems) requires prior written approval from the
editor. Reprinting, also in part, is prohibited.
This publication reflects the technical status at the time of printing.
Copyright by Conrad Electronic SE.
*2619435_V1_1122_jh_ss_en 698264459-2 I1/O1 en
