SpeaKa PROFESSIONAL SP-TVCM-510 Motorised TV Ceiling Mount Instruction Manual
- June 9, 2024
- Speaka PROFESSIONAL
Table of Contents
SP-TVCM-510 Motorised TV Ceiling Mount
Instruction Manual
Item No. 2531304 / SP-TVCM-510
VESA Compatible 100×100 200×200 300×300 400×200 400×400
SP-TVCM-510 Motorised TV Ceiling Mount
Remote Control Operation
A. Button Function
B. Manual Mode
In any position (but the minimum position against the ceiling), when manually
push up the TV ceiling mount over a distance. The TV ceiling mount will
automatically return back to the minimum position against the ceiling.
Coding of Remote Controller and Control Box 
Step 1: When the mount is powered on, press the
small button on the control box with a thin tool as shown. The unit emits a
beep, indicating that the control box is on standby for program coding.
Step 2: Press the “button on the remote control, and the control box
repeatedly beeps for approximate 10 seconds indicating that the remote control
is being programmed. The process will be finished automatically until you
can’t hear a beep any longer.
Note: The TV Mount can be matched with up to 20 remote controllers. To
clean up the data of all the remote controllers,press and hold the code
matching button for 5 seconds then release. The unit will emits two beeps
confirm the successful clean up and vice versa.
In Front
This repair guide intents to help you identify and solve the minor problems caused by unusual operation of the electric system of our electric TV mounts. The simple procedures in this manual are easy to follow and capable of solving the most problems happened in everyday use.
Error Indication
- The Buzzer Constantly Gives Out Alarm Sound: The Error Of Positioning Signal
Reset the system by following the instruction manual. If the alarm sound continues, please contact us to replace the product.
Remote Control Problems
-
Abnormal Loss Of Power
(Normally Batteries Are Out Of Power After 24hrs Without Using The Remote ControL)
Please contact us to replace remote control.
-
Buttons On Remote Control Don’t Work.
Please check if the batteries have power. If the problem isn’t solved. please contact us to replace the remote control. If the problem is still not solved after the replacement. please contact us to replace the product.
-
The Insensitivity Of Remote Control (The Functional Distance Is Less Than 3m.)
Please replace the batteries. If the problem is still not solved, please contact us to replace remote control.
Abnormal Operation: The TV Mount Can’t Be Adjusted To 0° Or 75°
Please reset the system by following the instruction manual. If the problem
is still not solved. please contact us to replace the product.
Can’t Operate
Please check if the power adaptor is properly connected to the product. If
so. please turn the power on. If there is no buzzer sound or red light power
Indication, please check if the power adaptor works properly. If the power
adaptor doesn’t work please contact us to replace the power adaptor. If the
power adaptor works properly, but the TV mount doesn’t work, please contact us
to replace the product.
Abnormal Noise
Please contact us to replace the product.
Risk of injury
Read the safety instructions supplied with the product before you install and
operate the product
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>