RYOBI R12SD Cordless Screwdriver Drill Instructions

: June 9, 2024
: RYOBI

Table of Contents

RYOBI R12SD Cordless Screwdriver Drill
- INTENDED USE
MAINTENANCE
- ENVIRONMENTAL PROTECTION
- SYMBOLS
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

RYOBI R12SD Cordless Screwdriver Drill

RYOBI R12SD-Cordless-Screwdriver-Drill-PRODUCT-IMAGE

Important
It is essential that you read the instructions in this manual before operating this machine

Subject to technical modifications

WARNING
Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, ﬁ re and/or serious injury.

Save all warnings and instructions for future reference.

DRILL DRIVER SAFETY WARNINGS

Use auxiliary handle(s), if supplied with the tool. Loss of control can cause personal injury.
Hold power tool by insulated gripping surfaces, when performing an operation where the cutting accessory may contact hidden wiring. Cutting accessory contacting a “live” wire may make exposed metal parts of the power tool “live” and could give the operator an electric shock.
Hold power tool by insulated gripping surfaces, when performing an operation where the fastener may contact hidden wiring. Fasteners contacting a “live” wire may make exposed metal parts of the power tool “live” and could give the operator an electric shock.

TRANSPORTING LITHIUM BATTERIES
Transport the battery in accordance with local and national provisions and regulations.
Follow all special requirements on packaging and labelling when transporting batteries by a third party. Ensure that no batteries can come in contact with other batteries or conductive materials while in transport by protecting exposed connectors with insulating, non-conductive caps or tape. Do not transport batteries that are cracked or leaking. Check with the forwarding company for further advice.

INTENDED USE

This product is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities. It is only intended to be used by responsible adults who have read the safety instructions and understand the hazards involved. You may use this product for the purposes listed below:

Drilling into a variety of materials:
- wood
- metal
- plastic
- ceramic
Driving and removing screws

Do not use this product in any way other than those stated for intended use.

MAINTENANCE

WARNING
The product should never be connected to a power supply when you are assembling parts, making adjustments, cleaning, performing maintenance, or when the product is not in use. Disconnecting the product will prevent accidental starting that could cause serious injury.

When servicing, use only identical replacement parts. Use of any other parts may create a hazard or cause product damage.
Do not use compressed air to blow dust/dirt from any power tool. Serious eye injury could result. Use a cloth, brush or vacuum to remove dust and dirt.
Do not at any time let brake fluids, gasoline, petroleum-based products, penetrating oils, etc., come in contact with plastic parts. They contain chemicals that can damage, weaken or destroy plastic.
Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to various types of commercial solvents and may be damaged by their use. Use clean cloths to remove dirt, carbon dust, etc.
For greater safety and reliability, all repairs should be performed by an authorized service center.

LUBRICATION
All of the bearings in the product are lubricated with a sufﬁcient amount of high grade lubricant for the life span of the product under normal operating conditions. Therefore, no further lubrication is required.