EACHINE EV300O OLED HD 3D FPV Goggles Diversity User Manual

: June 9, 2024
: Eachine

Table of Contents

Speciﬁcations
Package Included
Diagram
Introduction
DVR
DISPLAY
Brightness Adjustment
Firmware Update
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

User Manual
EV300O

EACHINE EV300O OLED HD 3D FPV Goggles Diversity-

Speciﬁcations

Specifications

BAND/CHANNEL table

BAND/CH table

BAND/CH| CH 1| CH2| CH3| CH4| CH5| CH6| CH7| CH8
A| 5865M| 5845M| 5825M| 5805M| 5785M| 5765M| 5745M| 5725M
B| 5733M| 5752M| 5771M| 5790M| 5809M| 5828M| 5847M| 5866M
E| 5705M| 5685M| 5665M| 5645M| 5885M| 5905M| 5925M| 5945M
F| 5740M| 5760M| 5780M| 5800M| 5820M| 5840M| 5860M| 5880M
R| 5658M| 5695M| 5732M| 5769M| 5806M| 5843M| 5880M| 5917M
L| 5362M| 5399M| 5436M| 5473M| 5510M| 5547M| 5584M| 5621M
Sensitivity| -98dBm±1dBm
Antenna port| 2 X SMA-K,50ohm

Package Included

Goggles*1
Receiver Module*1
Faceplate*2(wide and narrow)
Sponge with velcro*2
Zipper case*1
Power cable*1
Headtracker cable*1
5.8GHz 2dD antennas*2
Video/Audio Cable*1
USB-C Cable*1
User Manual*1

Diagram

EACHINE EV300O OLED HD 3D FPV Goggles Diversity-fig1

1.DC PORT(5.5*2.1mm)
3.USB C port
5.Focus adjustment wheel
7.SD card slot
9.Earphone jack
11.Record/Delete
13.CH/BAND/Search| 2.Head tracker port
4.IPD Slider
6.HDMI input
8.AV IN/OUTPUT
10.Volume/ Mode
12.System Menu/Headtracker
14.Power/Fan
---|---

EACHINE EV300O OLED HD 3D FPV Goggles Diversity-fig2

Introduction

The EV300O is First eachine goggles with OLED Screen, the 1024*768 high resolution screen have vivid color and high contrast ration, pilot can see more details in the racing . With diversity receiver , the receiver choose strongest signal, make the image more stable than single receiver.
The new designed optics have focus adjustment feature and 38 degree Field of view, gives pilots more immersive FPV experience.
The new OS with 10 languages to set select, pilot have no trouble with the menu system, with shuttle wheel and new user interface, pilot can set all the setting just by rolling the wheel without take oﬀ the goggles.

**** DO NOT EXPOSE THE LENS DIRECT TO SUNLIGHT, OTHERWISE THE SCREEN WILL BURN IN.

Quick Start Guide

Install the antenna and faceplate.
Use power cables to connect battery to the goggles, goggles can power by 2~6cell lipo battery, hold the power button to turn on.
Focus adjustment: move the focus adjustment wheel to focus, close one eye to adjust the focus, you can pop up the OSD menu as the template, when the image is clear, repeat the process with the other eye.
IPD adjustment: move the IPD slider until there is no double vision of the image.

Band /Channel / Receiver mode setting

Press the right wheel, then roll right wheel to change channel, press the wheel again switch to Band setting mode, then roll the wheel to change the Band. Press wheel again to select diversity or Mix mode .
No wheel operation for 3 seconds，RF setting will quit the channel setting mode.
Hold the right wheel to pop up search menu, press the right wheel to start auto search, after searching all the frequency, receiver will work on the strongest signal. Roll the right wheel to manually select the channels, hold the right wheel to quit searching.

Some camera on market didnt follow standard NTSC/PAL signal, cause the receiver confusing in Mix mode, It will cause image getting dark, color distortion, rolling image, user can switch to diversity mode to solve this issue.

Sometime the auto search channel is not accurate, user may need manually select the channel.

Volume Setting

In all mode preview mode, roll the left wheel to adjust the volume.
Volume setting is only eﬀective on earbud. Not eﬀective on AV OUT volume.
System didn’t save the volume setting, in case of the volume is too high in AVIN or RF mode.

MODE MENU

Short press the left wheel to pop up mode menu.
RF normal: this mode is normal 48 CH receive mode.
RF Racing: this mode will make receiver only work on RaceBand.
RF Third-Party: in this mode, the goggles button cant control the external receiver, also the OSD of the goggles cant read the band/channel of the receiver.
AVIN: When enable the AV IN mode . The NTSC and PAL system format can be supported to be automatically switched. The receiver module will be automatically turned oﬀ to save the power.
HDMI IN：the receiver module and the video recording module will be automatically turned oﬀ to save the power.
Playback: in this mode, customer can review the DVR ﬁles.

SYSTEM MENU

Short press right button to pop up or quit system menu.
Roll right shuttle wheel to navigate, press the wheel into the sub menu.
In image setting menu, customer have standard, bright, vivid, soft and 3 customized Files to select, customer can adjust Brightness, Contrast, Saturation, Hue and Sharpness to suit diﬀerent environment.
In system menu, RSSI can be calibrate, this function only eﬀective on eachine RapidMix receiver, when using dual receiver mode, make sure both receiver RSSI is calibrate to get stable image.
System Language can select in to: English, rench, erman, ussian, talian, ortuguese, panish, Chinese, Japanese, Korean.
In Power supply menu, user can choose battery type(2S~6S) to make sure goggles shown real capacity of the battery.
Voltage calibration gives user ±0.9V range to adjust the voltage, when calibrate the voltage, use multimeter to measure the loaded voltage of the battery, then use shuttle wheel to adjust voltage on OSD to match the real voltage.
Factory Reset : User can reset all the function and setting in this menu.
DVR FW upgrade:User can upgrade DVR Firmware from SD card in this menu.
Firmware version :Goggles Firmware , DVR Firmware version and Serial Number will shown in this menu.

The function of the wheel and buttons can be swapped from left side to the right side , makes to adapt left handed user. when rotary switch is enabled, all the function in manual is changed from left to right.

DVR

Left button is recording button and stop button.
Build in DVR H264 encoding SD card recommend Class10, SD card can support up to 128GB. ,
SD card must be formatted into FAT32 , user can get into system menu to select the Format SD .
The video recording function can be used in both the RF Mode and the AV IN Mode..
By default, when recording the video (including: Recording the sound), the “sound recording” function can be turned oﬀ in the system menu, but the video signal can be recorded only.
Automatic recording: enable this function , if the video signal has been detected, the recording function will be activated automatically. The recording function can also manually be stopped by press the REC button.
Cyclic recording：Overwriting of older recordings on or oﬀ (in case of storage space is wasted).
The video recording File will be automatically divided into the multiple Files. In the menu system, the video length can be set as: 5 minutes, 10 minutes, 20 minutes and 30 minutes. The default video length can be set as 30 minutes / each File.
If the power has been suddenly disconnected in the video recording process, the DVR will be damaged. The goggles have repairing function. After entering into the playback mode, the last DVR will be automatically checked. If it has been damaged, the DVR will be automatically repaired.

PLAYBACK

In playback mode, roll right wheel to choose the DVR, short press right wheel to play and pause .
Left wheel to adjust the volume.
When playing the DVR, roll the right wheel to Fast Forward or Fast backward.
Press the Right button to quit DVR .
Press the Left button to delete DVR.

DISPLAY

In Display setting menu, customer can change the aspect ratio(4:3 or 16:9), default is 4:3.
In Display menu, customer can set the RSSI icon: icon + percentage, Icon, Percentage, disable, also adjust the vertical position of the RSSI.
The Luminance of the OLED screen and be adjust in the menu (8 stage, default is 5).Normally do not set the brightness too high unless the image is dim. Due to the OLED’s characteristic, excessive brightness may cause a slight brightness drop in local screen.
OLED Sleep MODE: To prevent OLED burn out, the goggles have OLED sleep mode, The sleep mode can be set in the menu( 1minute 3minutes 5 minutes, default 3 minutes. When sleep mode is enabled the goggles will detect the movement of the goggles (via headtracker gyro), when the goggles stay still to the preset time , the buzzer will beep , after 10 seconds, the goggles will switch to sleep mode , the oled screen will turn oﬀ, move the goggles to quit OLED sleep mode.
When OLED sleep mode is triggered, the rest functions of goggles is still working (receiver ,DVR etc).
OLED Screensaver:The image will move 1pixel/10s, Flow the order: middle→right→middle→left→middle, circulating. this function can’t turn oﬀ.

To quit OLED Sleep mode: Move the goggles when hearing beep.

Head Tracking

The head tracking button is on the right side of the goggles.
The gyro required for an initialization time. When it is powered on, goggles must be kept horizontal and stable as long as possible. When hearing the sound of a “beep”, the initialization is done.
Hold HT button to reset the PPM signal to the center, goggles will beep when press the button.

Disable the Heattracker can save the gyro initialization time to speed up goggles boot time.

FAN

The built-in fan can not only be mainly used for defogging, but also can be used to dissipate the heat within the product. The speed of fan can be set in the system menu.
Press the POWER button to start up/stop the fan for defogging.
User can manually set fan speed to adjust the fan noise.

The fan will auto turn on when the temperature over a certain point.

Drone Finder Mode

Hold the left wheel to enable droneﬁnder mode.
Goggles will beep in this mode, the more rapid beep means the stronger the signal.
In this mode, use only patch antenna to user this feature.

Brightness Adjustment

User can roll the right wheel to quickly adjust the brightness.

Firmware Update

Upgrade Firmware
Goggles

Connect goggles to the computer.
Hold the left button when turn on the goggles, the usb cable will power the goggles, release the left button, computer will automatically install the driver , computer will show a new removable storage .
copy the Firmware File to folder(Not the SD card). goggles will installing the update at the same time.

Even enabled the rotary switch function, the boot button is still left button. It will takes about 60s to install the Firmware.

DVR

Take a TF card and format the card to FAT32.
Copy the DVR Firmware to the SD card , insert it in the goggles and turn it on.
Go to the system menu and choose DVR FM upgrade.

Receiver Firmware

Take the receiver out, hold the boot button when connect the receiver to the computer.
Computer will automatically install the driver , computer will show a new removable storage .
Copy the Firmware File to the folder(Not the SD card). goggles will installing the update at the same time. it will takes about 60s to install the Firmware.

This content is subject to change, download latest version from:

www.eachine.com

| Company: Lotus NL B.V. Address: Koningin Julianaplein 10, le Verd, 2595AA, The Hague, Netherlands. E-mail: peter@lotusnl.com Tel: +31644168999
---|---

EACHINE -icon2