Shark UV204 Series Spectra Upright Vacuums FAQs
- June 9, 2024
- Shark
Table of Contents
Shark UV204 Series Spectra Upright Vacuums FAQs
FAQs
SHARK SPECTRA – WHAT DO I DO IF MY UPRIGHT VACUUM OVERHEATS?
Applicable on UV204, UV204B, UV204SH, UV180 & EP825 — This unit is equipped with a motor protective thermostat. If for some reason the vacuum cleaner should overheat, the thermostat will automatically turn the unit off. Should this occur, unplug the vacuum cleaner from the wall outlet and turn off switch. Remove dust cup and empty. Clean dust cup filter. Allow the unit to cool for approximately 1 hour. To restart, re-plug into wall outlet and turn switch back on.
SHARK SPECTRA – WHY WON’T THE AGITATOR TURN ON?
Applicable on UV204, UV204B, UV204SH, UV180 & EP825 — The agitator will not turn on if the belt is broken or if the belt is not installed correctly.
SHARK SPECTRA – THE SUCTION ON MY UNIT DECREASES WHEN I ADD THE ATTACHMENTS, WHY IS THAT SO?
Applicable on UV204, UV204B, UV204SH, UV180 & EP825 — Attachments do restrict the air flow. Check the flexible hose and floor attachments for any obstruction and remove immediately. Ensure that your attachments are firmly positioned in place. The suction will diminish when your HEPA or cloth filter is full. Be sure to empty and wash the filters often and replace if necessary