Godox MoveLink Mini Wireless Lavalier Microphone Instruction Manual

Godox MoveLink Mini Wireless Lavalier Microphone

Foreword
Thank you for purchasing’
Movelink Mini is the new microphone system that transmits audio using 2.4GHz wireless frequency, with the characteristics of compact and portable, long battery life, and compatible with various devices by different adapters. Kits include one transmitter and one receiver, as well as kits include two transmitters and one receiver are available for you choice. It’s suitable for live streaming, interview, lecturing, video recording, etc.Please read this manual carefully before using to make sure the correct operation and exert the optimum function.

Main Feature

• Globally universal 2.4GHz wireless frequency, which can be used in WIFI and Bluetooth simultaneously.
  • The maximum barrier-free transmission distance up to 1 00m(tested in barrier-free outdoor environment according to FCC standard).
• Transmitter upgrades denoise function.
• Output volume adjustment and silent function available.
• Convenient matching and stable transmitting and receiving.
• Compatible with various devices by Type-C or Lightning adapters.
  • Attached charging case provides both charging and storage functions.

Warning

• This product is high-precision instrument, please avoid falling, collision or pounding.
• Do not disassemble. Should repairs become necessary, this product must be sent to our Company or an authorized maintenance center.
• Always keep this product dry. Do not use in rain or damp conditions.
• Do not leave or store this product in the environment of direct sunlight, near heating devices, or in hot, humid or dusty.
• Keep out of reach of children.
• Do not use in flammable and explosive environments. Pay attention to the relevant warning signs.
• Do not leave or store the product if the ambient temperature reads over 50’C.
• Please read carefully and follow the warnings or instructions provided by the manufacturer.

Structure of Product

Transmitter(MoveLink Mini TX)

1. Power Switch / Mute / Denoise Button
2. Indication Lamp
3. Built-in Microphone
4. Charging Points
5. Back Clip

Receiver(MoveLink Mini RX)

• Power Switch/Gain Control Button
• Indication Lamp
• Adapter Port
• Charging Points

Charging Case(ML-C2) (for Kit2)

1. Pairing Button
2. Receiver’s Slot
3. Transmitter’s Slot
4. Adapter’s Slot
5. Wind Cap’s Slot
6. Indication Lamp
7. Type-C Charging Port
8. Pin Hole

Charging Case(ML-C5) (for Kit1)

1. Pairing Button
2. Receiver’s Slot
3. Transmitter’s Slot
4. Adapter’s Slot
5. Wind Cap’s Slot
6. Indication Lamp
7. Type-C Charging Port
8. Pin Hole

What’s in the Box

• Transmitter: (Movelink Mini TX) G)
• Receiver: (Movelink Mini RX) @
• Charging: Case (ML-C2)(for Kit2) @
• Charging: Case (ML-CS)(for Kit1) @
• USB to Type-C: Data Cable
• 3.5mm TRS Audio Adapter: (MoveLink Mini Adpt.1)
• 3.5mm TRRS Audio Adapter Wind Cap: (MoveLink Mini Adpt.2)
• Lightning Adapter: (MoveLink Mini Adpt.LT) for LT Kit)
• USB to Iype-C Adapter: (MoveLink Mini Adpt.UC) for UC Kit)
• Portable Rope
• Pin

Note: Due to continuous updates and upgrades of the products, there may be differences between the actual products and the pictures. Therefore, the pictures are for reference only, products to prevail in kind.

CzJx7.

| (Z)x7,

@x7,

| l!iJx7.

@) x 1 ,

| @x7, @x7,

@x1_ @x1

Movelink Mini 2.4GHz Wireless Microphone System for iOS Lightning Device| Movelink Mini LTKit1| G)x7,

CzJx7.

| (Z)x7,

@x7,

| l/iJx7, @x7,| @x7, @x7, @x1, @x1
Movelink Mini 2.4GHz Wireless Microphone System for Type-C Device| Movelink Mini UC Kit2| G)x2, (Z)x1,| (Z)x7,

@x2,

| @x7, @)x1,| @x7, @x7, @x1, @x1
Movelink Mini 2.4GHz Wireless Microphone System for iOS Lightning Device| Movelink Mini LTKit2| G)x2, (Z)x7,| (Z)x7,

@x2,

| @x7, @x1,| @x7, @x7, @x7, @x7

Buttons Instruction

1. Power Switch/Mute/Denoise Button on Transmitter
   Long press for 3 seconds to turn on the device, the indication lamp will be constant on yellow in unpaired status and blue in paired status. Short press to enter mute mode, the indication lamp will be constant on red. Short press twice quickly to enter denoise mode (the indication lamp will flash purple twice)/exit denoise mode (the indication lamp will flash green twice), the denoise mode is off by default after powered on.

2. Power Switch/Gain Control Button on Receiver
   Long press for 3 seconds to turn on the device, the indication lamp will be constant on yellow in unpaired status and blue in paired status. Short press to adjust the output volume, the indication lamp will flash green every 0.5 seconds in level 1 (-33dB), and purple every 0.5 second in level 2 (-43dB).

3. Pairing Button on Charging Case
   Short press to pair, the transmitter and receiver will flash green quickly. The receiver will exit pairing status if successfully paired with two transmitters in Kit2, otherwise, it will exit pairing status after 1 Os ..

4. Long Press to Reset
   If the transmitter or receiver cannot be turned on due to long-term idle use or other reasons, put them into the charging case, take out after the devices have been charged, then press and hold the power switch button for 10 seconds to reset.

Indication Lamps Instruction

Transmitter

1. The indication lamp will be constant on yellow when the transmitter is powered on but unpaired, then turn to constant on blue after paired. When the battery level is lower than 10%, the indication lamp will flash red.
2. The indication lamp will be constant on red in mute mode.
3. Enter denoise mode: the indication lamp will flash purple twice. Exit denoise mode: the indication lamp will flash green twice.
4. Charging in the case: The indication lamp will not lighten on when in malfunction or poor contact. It will breathe in blue when charging normally with the case open, and be constant on blue (paired) or yellow (unpaired) after fully charged. While it will breathe in blue when charging normally with the case closed, and off after fully charged.
5. Pairing in the case: The indication lamp will flash green quickly in pairing, exit pairing status if failed and then be constant on yellow, while automatically turn to charging mode if paired successfully.

Receiver

1. The indication lamp will be constant on yellow when the receiver is powered on but unpaired, then turn to constant on blue after paired. When the battery level is lower than 10%, the indication lamp will flash red.
2. Gain control: The indication lamp will flash purple every 0.5 seconds when in level 1, and green every 0.5 seconds when in level 2.
3. Charging in the case: The indication lamp will not lighten on when in malfunction or poor contact. It will breathe in blue when charging normally with the case open, and be constant on blue (paired) or yellow (unpaired) after fully charged. While it will breathe in blue when charging normally with the case closed, and off after fully charged.
4. Pairing in the case: The indication lamp will flash green quickly in pairing, exit pairing status if failed and then be constant on yellow, while automatically turn to charging mode if paired successfully.

Note:

1. When the transmitter is within the receiving range of the receiver, the indication lamp will be constant on blue. When the transmitter is beyond the receiving range, the indication lamp will be constant on yellow, and automatically turn to constant on blue after back to the receiving distance.
2. The transmitter and receiver will automatically enter into charging mode when put into the charging case. They will automatically shut down after fully charged when the case is closed, then automatically boot up when the case is opened.

Charging Case

1. Charging: The indicator lamp will breathe in white when in charging mode, and turn to constant on white after fully charged.
2. Discharging: When the receiver and transmitter are put into the charging case respectively or at the same time, short press the pairing button to trigger charging if the devices are fully charged. The indication lamp will be constant on white when transmitter and receiver are not fully charged while off after fully charged. It will flash white when the battery level is lower than 10%.\

Operating Instruction

1. Pairing
   Put the transmitter and receiver into the charging case and press the pairing button, the receiver and transmitter will flash green quickly, and turn to be constant on blue after successfully paired (breathe in blue if not successfully). Or turn on the transmitter and receiver manually, they will automatically start pairing within the receiving range, the indicator light will be constant on blue after successfully paired.seconds and then off, then the devices is in charging mode.

2. Installation
   Install the transmitter on the collar through the back clip, aiming the built- in microphone towards the sound source direction. Please do not cover the built-in microphone in order to get good sound effects.Choose the suitable adapter and insert into the adapter port, and then connect to the corresponding device to use.

Technical Data

Max.Barrier-free Transmission

Distance

| 100 meters (tested in barrier-free outdoor environment

according to FCC standard)

Working Temperature Range| -10~50°C
Input Parameters| Built-in Ii-ion battery

3.7V, 100mAh, 0.37Wh

| Built-in Ii-ion battery

3.7V, 150mAh, 0.555Wh

Dimension| 53mm’21mm’17mm| 61mm’21mm’15mm
Net Weight| 12g| 14g
Product Name| Charging Case
---|---
Model| ML-C2| ML-C5
Input Parameters| Built-in Ii-ion battery 3.7V, 1370mAh, 5.069Wh/

Type-C 1A/5V

| Built-in Ii-ion battery 3.7V, S00mAh, 2.96Wh/

Type-C 660mA/5V

Dimension| 163mm’ 65mm’ 32m| 139mm’57mm’28m
Net Weight| 180g| 115g

Changes made to the specifications or designs may not be reflected in this manual.

Maintenance

Avoid falling. Strong collision or vibration may malfunction the device.
Keep dry. This product is not water-proof. Malfunction, rust, and corrosion may occur and go beyond repair if soaked in water or exposed to high humidity.
Avoid sudden temperature changes. Condensation happens in sudden temperature changes such as the circumstance when taking the product out of a building with higher temperature to outside in winter. Please put the product in a handbag or plastic bag beforehand.
Keep away from strong magnetic field. The strong static or magnetic field produced by devices such as radio transmitters leads to malfunction.
Specifications and data may subject to changes without notice.

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation
   Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Warning

Operating frequency:2402MHz – 2480MHz
Maximum EIRP Power: 5dBm

Declaration of Conformity
GODOX Photo Equipment Co.,Ltd. hereby declares that this equipment are in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. In accordance with Article 10(2) and Article 10(10), this product is allowed to be used in all EU member states.For more information of DoC, Please click this web link: https://www.godox.com/DOC/Godox_MoveLink_Mini_DOC.pdf
The device complies with RF specifications when the device used at 0mm from your body.

IC Warning
This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions:

1. This device may not cause interference; and
2. This device must accept any interference, including interference that may cause undesired operation of the device.

Cet appareil est conforme aux CNR exemptes de licence d’lndustrie Canada . Son fonctionnement est soumis aux deux conditions suivantes

1. Ce dispositif ne peut causer d’interferences ; et
2. Ce dispositif doit accepter toute interference , y compris les interferences qui peuvent causer un mauvais fonctionnement de l’appareil.

Warranty

Dear customers, as this warranty card is an important certificate to apply for our maintenance service, please fill in the following form in coordination with the seller and safe­keep it. Thank you1

Seller

I nform ation

| Name
Contact Number
| Address
Date of Sale

Note

( Applicable Products )

The document applies to the products listed on the Product Maintenance information (see below for further information). Other products or accessories (e.g. promotional items, giveaways and additional accessories attached,etc.) are not included in this warranty scope.

( Warranty Period
The warranty period of products and accessories is implemented according to the relevant Product Maintenance Information. The warranty period is calculated from the day(purchase date) when the product is bought for the first time, and the purchase date is considered as the date registered on the warranty card when buying the product.

( How to Get the Maintenance Service )
If maintenance service is needed, you can directly contact the product distributor or authorized service institutions. You can also contact the Godox after-sale service call and we will offer you service. When applying for maintenance service, you should provide valid warranty card. If you cannot provide valid warranty card, we may offer you maintenance service once confirmed that the product or accessory is involved in the maintenance scope, but that shall not be considered as our obligation.

( Inapplicable Cases )

The guarantee and service offered by this document are not applicable in the following cases: CD . The product or accessory has expired its warranty period; CZ) . Breakage or damage caused by inappropriate usage, maintenance or preservation, such as improper packing, improper usage, improper plugging in/out external equipment, falling off or squeezing by external force, contacting or exposing to the improper temperature, solvent, acid, base, flooding and damp environments, etc; @ . Breakage or damage caused by non authorized institution or staff in the process of installation, maintenance, alternation, addition and detachment; @ The original identifying information of product or accessory is modified, alternated, or removed; @ . No valid warranty card; @. Breakage or damage caused by using illegally authorized, nonstandard or non-public released software; (J) . Breakage or damage caused by force majeure or accident;®. Breakage or damage that could not be attributed to the product itself. Once met these situations above, you should seek solutions from the related responsible parties and Godox assumes no responsibility. The damage caused by parts, accessories and software that beyond the warranty period or scope is not included in our maintenance scope. The normal discoloration, abrasion and consumption are not the breakage within the maintenance scope.

Maintenance and Service Support Information
The warranty period and service types of products are implemented according to the following Product Maintenance Information:

Product

Type

| Name| Maintenance

Period(month)

| Warranty Service Type
Parts| Product Main Body| 72| Customer sends the product to designated site
Battery| 3| Customer sends the product

to designated site

Charger.Electrical Parts etc| 72| Customer sends the product to designated site
Other Items| Power Cable.Sync Cable, Battery Case, Windscreen Foam, Wind Cap,

Locking Device, Lanyard, Tie, Velcro Tape, Clip, Bag, Package etc.

| No| Without warranty

QR SCAN

GODOX Photo Equipment Co., Ltd.
Add.: Building 2, Yaochuan Industrial Zone, Tangwei Community, Fuhai Street, Bao’ an District, Shenzhen 5181 03, China
Tel: +86-755-29609320(8062)
Fax: +86-755-25723423
E-mail: godox@godox.com

www.godox.com
Made in China I 705-MNLT00-00

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>