boAt Airdopes Atom 83 True Wireless Earbuds User Manual

Airdopes Atom 83 True Wireless Earbuds User Manual

AIRDOPES ATOM 83

Get ready to immerse yourself in musical bliss with your very own pair of boAt Airdopes Atom  83. Please consider this manual as your guidingmap towards the unparalleled  shores of auditory realm. Knowledge of Bluetooth and device connectivity is essential for steering this boat and therefore we strongly recommend thorough reading of this  manual. Also, you may refer to the same at times when you face any sort of difficulty.

PACKAGE CONTENTS

• 1x Pair of TWS Earbuds
• ix Charging Case
• lx Type-C Charging Cable
• Ix User Manual
• ix Warranty Card
• ix Catalogue
• FAQ Card

OVERVIEW

• CTC (Capacitive Touch Control)

POWER ON (FIRST TIME USER)

Step 1: To switch the earbuds on (Smart Power On) simply open the iid of the charging case (when earbuds are inside). Courtesy our WP” {Insta Wake N’ Pair) technology,  the earbuds power on automatically, get connected and enter the connection mode
OR
Long touch the CTC (Capacitive Touch Control) on both earbuds for 3 seconds to manually power on the earbuds
Step 2: After powering on, the earbuds enter the Connection Mode, indicated by alternate red and blue LED flashes on primary earbud and blue LED fiaches once every 5  seconds on the secondary earbud

CONNECTION MODE

Step 3: Turn on the Bluetooth functionality on your phone/media device and scan
Step 4: Search for ‘Airdopes Atom 83’ and pair accordingly.
Congratulations! Your earbuds are now connected successfully via Bluetooth
Note:

• Pairing mode lasts for 5 minutes. If the pairing time is missed, then you wiil need to reconnect the earbuds and follow the above-mentioned procedure
• Airdopes Atom 83 remembers previously connected devices; once switched on, the earbuds automatically reconnect to the previously connected devices in working range.

SINGLE EARBUD USAGE

Step: Please note that both the earbuds can be used in mono mode. Use Smart / Manual Power On for switching on the desired Dist.
Step 2; The selected earbud automaticaly enters the connection
Mode indicated by red and blue LED flashes
Step 3: Tum on Bluetooth on your phone/media device and search for ‘Airdopes Atom 83° to connect.
To switch to Stereo mode, simpty take out the other earbud from the case. It will automatically power on and pair with the previously selected earbud, hence enabling Stereo usage
You cannot skip tracks or return to the previous tracks in Mono (single- earbud) mode

QUICK GUIDE ON FUNCTIONALITIES

CHARGING THE EARBUDS

Step 1. Please insert the earbuds back inside the charging case in correct onentation and close the lid
Step 2: In charging status, the red LED tums on for 2 secs when case lid gets opened LED stays off when the lid stays closed.
Step 3: Once the earbuds get fully charged, the charging case automatically switches off to save power, and the red LED stays tumed off.
Note:

• Before using the earbuds for the first time, it is recommended to fully charge the earbuds. Also, please keep the lid of the charging case closed while charging.

CHARGING THE CASE

Step To charge the ca.. plug one end of the provided cable into the ca. and connect the ot. encl to a commiter/ wall aciaoter/ powerbank etc
Remaining case battery led indications

normal state then goes into slo, breathing LED
30,70% Bttery| White LED Winks thrice upon opening the case lid| Fiff..t shows the Nsirmal state then goes into slow breathing white LED
70,99% Battery| Groton LED blinks thrice upon obiening the case lid| First shows the normal state then goes Into slow breathing green LED
Fully Charged| LED stays off| Solid green LED

Case LED indication when Earbuds are get ing charged from the case
This is to indicate the earbud getting charged from the ca. (when caso lid gets closed)

• CYAN for 5 scoconds to indicate LEFT bud is charging from the Case
• PURPLE for 5 seconds to imlicate RIGHT bud is charging from the Ca.
• If both are properly charged, BLUE for 5 seconds

BASIC FUNCTIONS

• Voice Assistant: Long touch either CTC for 3 seconds to activate default voice assistant

• Answer: Singie tap the CTC on ether earbud to answer an incoming call

• Hang Up / Reject Call: Double tap the CTC on either earbud to end / reject call

• Play/Pause Music: Single tap either earbud’s CTC to play or pause music

• Next Track: When playing music, double tap the right earbud’s CTC to skip to the next song

• Previous Track: When playing music, double tap the left earbud’s CTC to return to the previous song
  Note:

• Volume can only be controlied via the media device

VOICE ASSISTANT

Step 1: Long touch the CTC on either earbud for 3 seconds to activate the smart voice assistant
Step 2: The respective voice assistant screen pops up and you may place your commands at ease

BEAST™ MODE
Triple tap the left CTC to switch to Low Latency mode, also known as the BEAST™ Mode. Once switched on, it gets notified via a sound prompt, Triple tap the teft CTC  once again, to turn it off and retum to standard Music Mode.
Made for the Gamers – By Gamers, BEAST™ Mode reduces the latency significantly and improves the overall gaming experience.

Tips. You may try out the following commands,

• What Is the weather?
• Play asong
• Set a reminder

Note: If the voice assistant doesn’t get triggered, then the functionality has to be first enabled via your media device settings.

ENx™ TECH

Our ENx™ tech algorithm cancels out the background noise so that you can be heard crystal clear via voice calls. One need not activate ENx” as the quad mics are equipped  with the same and activated by default.
Deliver your voice without interruptions anywhere – traffic, railway stations, airports, work space; literally anywhere!

SMART POWER OFF

Step 1. After usage, remove both the earbuds from your ears
Step 2: Place the earbuds back into the charging case in correct orientation and close the lid
The earbuds automatically switch off (and enter charging mode).

MANUAL POWER OFF
Step 1. Long touch both CTCs for 5 seconds to manusily power off Bs sats
Step 2. Once the earbuds get turned off, piace them back inside the case and close the lid

FACTORY RESET
Perform the factory reset in case you feel any difficulty while operating your Airdopes.
NOTE: Before performing reset, clear “Airdopes Atorn 83” from pairing device history by forgetting device
Step 7. Take out the earbuds from the charging case, and long touch the CTC for 5 seconds on both the earbuds.
Step 2: Place the earbuds inside the Case (Earbuds will automatically power- off in the charging case).
Step 3, Close the lid, wait for 5 second., After successful fact, reset. Red LED blinks quickly 5 times on Ca. and Eatbuds, Stop 4, Take out the earbudr. frorn the charging case and perform a fre..nnection.
Note: To complete the factory reset, all of the above steps .ould be performed. Congratulation. Your …dopes Atorn 83 has been Reset

SPECIFICATIONS

60% volume)
Standby Time| 6 months
Transmission Range| 10m
Driver Size| 13mrn2
ENx'”| Yes
ASAP”‘ Charge| Yes
Frequency| 20HZ-20KHZ
Battery| 320mAh (Case) . 35mAh2 (Earbuds)
Charging Time| 40min (Earbuds) . 1H 40min(Caso)
Charging Interface| USB Type C
Water Resistance| 1PXS

WARNING

• Please follow the instructions to operate.
• Please don’t use the earbuds in extreme temperatures
• Please don’t use the product near water.
• Please keep the product away from heat sources, as the heat may damage it.
• Don’t jam the ports such as charger port, LED port, etc.
• Itis recommended to utilize the product below the maximum volume in order to protect hearing & extend the ear-buds’ service life.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>