Godox VL200II LED Video Light Instruction Manual

Godox VL200II LED Video Light

Safety Instructions and Attentions

First of all, as the most basic principle:
This product is a professional lighting set equipment and should be used by professional lighting engineers or under the guidance of professionals. Basic safety attentions must always be followed during use, as follows:

1. Before use, please read and understand these instructions and attentions. Professional lighting is prohibited for children. When children are near, parents or accompanying persons must supervise closely to prevent children from personal injury due to collision with lamps or private use of lamps.
2. This lighting product is not ordinary lighting product and cannot be used for general lighting. Anyone who has suffered eye damage or has sensitive eyes should avoid using this product.
3. When the lamp is on, it must be used with care. Do not touch high-temperature parts, such as LED lamp beads, to avoid burns.
4. When the lamp is on, it is forbidden to look directly at the lamp beads under any circumstances. Strong light should be used under the guidance of professional lighting engineers. Avoid prolonged exposure to strong light under any circumstances. If eye discomfort, please turn off the lamp in time, suspend use, and see a doctor immediately.
5. When the lamp is on, it is forbidden to look directly at the lamp beads under any Circumstances. Strong light should be used under the guidance of professional lighting engineers. Avoid prolonged exposure to strong light under any circumstances. If eye discomfort, please turn off the lamp in time, suspend use, and see a doctor immediately.
6. If the lamp bead is damaged or deformed by heat, stop using this equipment, and contact the manufacturer, service agent or qualified maintenance personnel to replace the lamp bead in time to avoid accidents.
7. This product is only suitable for use in -10’C to 40’C operating environment and normal humidity environment.
8. Do not use damaged equipment or accessories, and wait for professional maintenance personnel to check and repair to confirm being normal before use.
9. During using, if the casing of this product is broken due to being dropped, squeezed or subjected to strong impact, please do not use it, so as to avoid electric shock injury due to contact with internal electronic components.
10. If an extension cord is required, please use an extension cord with a current rating greater than or equal to that of the equipment. If an extension cord is rated less than the equipment, overheating may result.
11. Some products have long power cords, please place the power cords properly and keep them in a safe place. Avoid contacting the power cord with overheating surfaces, avoid improper placement that could cause pulling damage, or trip on-site personnel. Please use the certified power cord from the original manufacturer. If the product is damaged by using a non-certified power cord, it will not be repaired by our factory.
12. Be sure to unplug equipment from the power outlet before cleaning and repairing. When not in use, do not pull the power cord to unplug the equipment. For normal power-off, please hold both ends of the plug of the equipment with your hands and pull the plug out of power outlet. This equipment needs to be connected to a grounded outlet.
13. This equipment is not waterproof, please keep it dry and do not immerse it in water or other liquids. The equipment should be installed in a dry and ventilated place, and avoid using it in rainy, humid, dusty or overheated environments. Do not place any objects on the lamp or let liquid flow into the lamp to avoid accidents.
14. Do not disassemble the product without permission. If the product fails, it must bechecked and repaired by authorized maintenance personnel.
15. Before storing, make sure that the equipment has cooled down completely. For storage, unplug the power cord from the equipment. The equipment should be placed in the carrying case or in a ventilated dry place.
16. Do not place equipment near flammable and volatile solvents such as alcohol and gasoline.
17. Do not use accessories that are not recommended by our factory to avoid fire, electric shock or personal injury.
18. When cleaning, do not wipe it with a damp cloth, please use a dry cloth or a soft cloth to wipe the dirt of the equipment.
19. Please take off the protective cover before using.
20. This product complies with ROHS,CE, and FCC certification, please refer to the relevant national standards for use and operation.
21. The satiety instructions are formulated according to the strict testing of the factory, and the design and specifications of the equipment are subject to change without prior notice. For latest product information, please check the GODOX website and view latest electronic instruction.
22. Some products have built-in lithium batteries. Please use specified chargers, and use them within a proper range of the specified voltage and temperature according to the correct operating instructions.
23. Some products are Datary powered. Do not use any batteries, power sources or accessories not specified in the instructions for such products. Keep batteries and other accessories out of the reach of children and infants. In the instance that a child or infant swallows a battery or accessory, immediate emergency medical attention is required. If the battery leaks, becomes discolored, deformed, emits smoke, or emits an abnormal odor, remove it immediately. Be careful during removal to avoid burns. Continued use could result in fire, electric shock, or burns. Do not use any deformed or modified batteries Do not disassemble or modify this product or hatter Do not heat or solder the battery. Keep the battery away from fire or water. Do not incorrectly insert the positive and negative ends of batteries, or mix old and new batteries or batteries of different types together
24. One-year warranty period, accessories such as consumable batteries, adapters, power cords, etc. are not covered by this warranty.
25. If it is found that the equipment is repaired without authorization, the one-year warranty period will be cancelled and relevant fees will be charged for maintenance.
26. Machine failures caused by non-standard operation are not covered by the warranty.
    keep these instructions!

Foreword

Thank you for purchasing this Godox Product!
VLIl series LED video lights VL1 5011, VL200Il and VL300|| are featured with scientific heat dissipation design, separated adapter, controller and light body, high security coefficient, strong power, stable light source, ultra-high CRI and powerful performance, quite suitable for shooting scenes such as children photography, studio shooting, interview lighting, still life shooting and video shooting. It supports Bluetooth remote control through “Godox Light’ APP and wireless brightness adjustment through optional Godox RC-A6 remote Control. Please read this manual carefully before using to make sure the correct operation and exert the optimum function

Main Feature

• Compact structure, lightweight and portable
• Support 2.4GHz wireless control and Bluetooth control
• Strong power and stable light source, brightness adjustable from 0% to 100%
• DC power supply or V-port lithium battery power supply, support both indoor and outdoor using
• 8 customed light effects and convenient operation
• Separated adapter, controller and light body enable scientific heat dissipation
• VL15011 and VL2001I have 360° U-type bracket, standard Bowens mount and umbrella hole
• Attached carry bag makes it conveniently portable.

Warning

• Do not look directly at the light source.
• The luminaire is intended for professional use only.
• Keep out of reach of children.
• Please take off the lamp cover before using.
• Do not leave or store the product if the ambient temperature reads over 40°C.
• Do not fire directly against human eyes as it may cause Visual impairment.
• Please use the original power cable, damages caused by using other cables will invalid the warranty.
• As this product do not have waterproof function, please take measures of waterproof in rainy or damp environment.
• Always keep this product dry. Do not use in rain or in damp conditions.
• Do not use the product in the presence of flammable gases, chemicals and other similar materials.
• the light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similar qualified person.
• Do not disassemble. Should repairs become necessary, this product must be sent to an authorized maintenance center.
• The lamp shall be changed if it has become damaged or thermally deformed.

Structure of Product

VLI5011 Light Body

1. Accessory Locking Ring
2. Bowens Mount
3. LED Beads
4. Thermoset
5. Bracket Locking Ring
6. Bracket Sleeve Ring
7. Umbrella Input
8. Handle
9. Thermoset
10. Power Input Socket
11. U-type Bracket
12. Bracket Sleeve

VL150II Controller

1. Handle
2. LCD Panel
3. FX/Wireless Button
4. Adjust Dial
5. Power Switch
6. V-port Battery Slot
7. Battery Compartment
8. Battery Locking Ring
9. DC Input Port
10. DC Output Port

VL200II/VL300II Controller

1. Handle
2. LCD Panel
3. FX/Wireless Button
4. Power Switch
5. Adjust Dial
6. Battery Locking Ring
7. V-port Battery Slot
8. Battery Compartment
9. DC Input Port
10. DC Output Port

Included Items

Operation Instruction

1. Power on/off
   Connect the adapter and controller, long press the Power Switch to power the LED light on or off.

2. Mode selection: Constant on mode/FX mode
   Constant on mode: The main interface is constant on mode, while the FX icon is not displayed on the left bottom of panel. Turn the adjust dial for light brightness to change the value from 0% to 100%. FX mode : Long press FX/ wireless button to make the FX displayed on the left bottom of panel, it is FX icon mode.When the FX Icon flashes, turn the adjust dial to select among the 8 light effects, then short press the FX/wireless button to confirm. Short press the FX/wireless button again can reselect the light effect.
   Light effects table (8 types)
   

When the FX icon stops flashing, turn the adjust dial for light brightness to change the value from 0% to 100%.

3. 2.4GHz wireless setting
   CH setting: Short press the FX/wireless button once to make the CH icon flashes, then turn the adjust dial to choose among 01 to 32 channels. When the CH icon stops flashing, it means CH setting completed and automatically exited, while the CH icon flashes means short pressing FX/wireless button 4 times can also automatically exit CH setting.
   GR setting: Short press the FX/wireless button twice to make the GR icon flashes, then turn the adjust dial to choose among A to F or 0 to 9 groups. When the GR icon stops flashing, it means GR setting completed and automatically exited, while the GR icon flashes means short pressing FX/wireless button 3 times can also automatically exit GR setting. ID setting: Short press the FX/wireless button three times to make the ID icon flashes, then turn the adjust dial to choose among 01 to 99 IDs. When the ID icon stops flashing, it means ID setting completed and automatically exited, while the ID icon flashes means short pressing FX/wireless button twice can also automatically exit ID setting.

4. Power option(VL300II)
   Press the power switch and FX/wireless button at the same time in power off status to enter power option mode. Turn the adjust dial to choose power from 200, 250 and 300. The power is 300W by default. It will exit from this mode automatically without operation for 5 seconds.
   Note Ihis function is used for the situation that the battery enter protection states and cannot work due to some v-port battery doesn’t output the corresponding power in strong power output. When enter this mode, the output power of the light can be decreased and the battery can be loaded instead of being protected (this function only applies to VL300|I).

5. Bluetooth control Check Bluetooth MAC code Check Bluetooth MAC code Short press the FX/wireless button four times to make the Bluetooth
   icon and MAC code displayed, it is in Bluetooth setting interface. Bluetooth reset
   Long press the FX/wireless button in Bluetooth setting interface to make the Bluetooth icon flashes, it means the Bluetooth is resetting. When the Bluetooth icon stops flashing means Bluetooth resetting is completed. It will exit from this mode automatically without operation for 10 seconds, short press the FX/wireless button to exit is also available.

APP download
Scan the QR code to download the “Godox Light’ mobile app. (It can be used on both Android and Apple systems) For specific operations, please refer to the “Help” manual of the mobile APP, which contains detailed tutorials

Note: The first mobile device (mobile phone or tablet) can directly use the APP to control the light body. When replacing other mobile devices (mobile phones or tablets), the lamp body can be connected normally after Bluetooth reset.

luminance data

VL150II

CCT| Testing Conditions| Illuminance Unit| 1m| 2m| 3m
5600K| bare lamp| lux| 6100| 1700| 810
fc| 570| 160| 76.0
with reflector| lux| 76000| 16000| 5400
fc| 7000| 1500| 500
VL200II
CCT| Testing Conditions| Illuminance Unit| 1m| 2m| 3m
5600K| bare lamp| lux| 7400| 2100| 1100
fc| 700| 190| 100
with reflector| lux| 88900| 19000| 8000
fc| 8300| 180| 750
VL300II
CCT| Testing Conditions| Illuminance Unit| 1m| 2m| 3m
5600K| bare lamp| lux| 11600| 3500| 1700
fc| 1100| 300| 160
with reflector| lux| 90000| 20900| 8800
fc| 8400| 1950| 820

• All the above tests are based on the condition of 100%brightness.

Technical Data

FCC Statement

This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

To maintain compliance with FCC’s RF Exposure guidelines,
This equipment should be installed and operated with minimum distance between 20cm the radiator your body
2.4G RF module frequency: 2412-2464.5MHz

Warning
Operating frequency: 2402MHz-2480MHz
Maximum EIRP Power: 5dBm

Declaration of Conformity

GODOX Photo Equipment Co.,Ltd. hereby declares that this equipment are in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. In accordance with Article 10(2) and Article 10(10), this product is allowed to be used in all EU member states.For more information of DoC, Please click this web link: https://www.godox.com/DOC/Godox_VLII_Series_DOC.pdf. To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body.

Warranty

Dear customers, as this warranty card is an important certificate to apply tor our maintenance service, please fill in the following form in coordination with the seller and safe- keep it. Thank you!

Note. This Tofu shall De sealed by the seller.

Applicable Products

The document applies to the products listed on the Product Maintenance Information (see below for further information). Other products or accessories (e.g. promotional items, giveaways and additional accessories attached, etc.) are not included in this warranty scope.

Warranty Period

The warranty period of products and accessories IS implemented according to the relevant Product Maintenance Information. The warranty period is calculated from the day(purchase date) when the product is bought for the first time, And the purchase date is considered as the date registered on the warranty card when buying the product.

How to Get the Maintenance Service

If maintenance service is needed, you can directly contact the product distributor or authorized service institutions. You can also contact the Godox after-sale service call and we will offer you service. When applying for maintenance service, you should provide valid warranty card. If you cannot provide valid warranty card, we may offer you maintenance service once confirmed that the product or accessory is involved in the maintenance scope, but that shall not be considered as our obligation.

Inapplicable Cases

The guarantee and service offered by this document are not applicable in the following cases:.

1. The product or accessory has expired its warranty period;
2. Breakage or damage caused by inappropriate usage, maintenance or preservation, such as improper packing, improper usage, improper plugging in/out external equipment, falling off or squeezing by external force, contacting or exposing to the improper temperature, solvent, acid, base, flooding and damp environments, etc;
3. Breakage or damage caused by non-authorized institution or staff in the process of installation, maintenance, alternation, addition and detachment,
4. The original identifying information opt product or accessory iS modified, alternated, or removed;
5. No valid warranty card; 6. Breakage or damage caused by using illegally authorized, nonstandard or non-public released software; . Breakage or damage caused by force majeure or accident;
6. Breakage or damage that could not be attributed to the product itself. Once met these situations above, you should seek solutions from the related responsible parties and Godot assumes no responsibility. The damage caused by parts, accessories and software that beyond the warranty period or scope is not included in our maintenance scope. The normal discoloration, abrasion and consumption are not the breakage Within the maintenance scope.

Maintenance and Service Support Information

The warranty period and service types of products are implemented according to the following Product Maintenance Information:

Godox After-sale Service Call 0755-29609320-8062

GODOX Photo Equipment Co.,Ltd.
Add.:Building 2, Yaochuan Industrial Zone, Tangwei Community, Fuhai Street, Bao’an District, Shenzhen 518103,China
Tel:+86-755-29609320(8062) Fax:+86-755-25723423
E-mail:godox@godox.com
www.godox.com
Made in China

References

• GODOX Photo Equipment Co.,Ltd.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>