BLUEFEEL BAM101 AirNotis Air Quality Monitor User Guide
- June 9, 2024
- BLUEFEEL
Table of Contents
BAM101 AirNet’s Air Quality Monitor
User Guide
The Smartest Air Quality Monitor
Buttons and parts
Specifications
Product | AirNet’s Air Quality Monitor | Model No. | BAM101 |
---|---|---|---|
Line voltage | DC 5V / 1A | Battery | Lipoid 1cell 2,000mAh |
Country of manufacture | Republic of Korea | Manufacturer | BLUEFEEL |
Sales right | BLUEFEEL | Contact |
① Power / display control
Power on/off
Press the upper button for 2 seconds to turn the device on. To protect battery
life and use AirNet’s for a longer time, it is recommended to use power saving
mode through a AirNet’s app. (Display off after 1 minute, 5 minutes, and 10
minutes)
Display modes
Short-click the top button to change the display theme.
Total Monitoring Mode
▶ Air Monitoring Mode
▶ Camping Mode
▶Fine Dust Monitoring Mode1
▶ Fine Dust Monitoring Mode2
▶Temp&Humidity Mode
Notification on/off
Click the top button shortly to turn off alert or message popups on the
display
② Battery status indicator
The battery status indicator informs you of the battery level and charging
status.
③ Display
Short-click the top button to change the display theme. Each theme intuitively
the numbers of specific air components – CO₂, CO, articulate matter, VOCs,
Temperature, and Humidity.
④ Download Air Notes App
You can download the Air Notes app in Google Play or App Store.
Using the app, you can change the device theme, set power saving mode, check
various air quality and receive alarms through your smartphone. Search
‘AirNet’s’ on Google Play or App store.
Product warranty
Name of customer| | Contact|
---|---|---|---
Product| | Date of purchase|
Issue| | Place of purchase|
The warranty covers the following cases:
- Any defect due to faulty materials and/or workmanship occurs
- Any defect occurs, provided the product has been handled properly for its intended use and in accordance with the operating instructions
The warranty is not applicable in any of the following cases:
- The warranty period has expired
- The defect or damage is caused by the customer’s improper use
- Defects due to cause beyond control like lightning, abnormal voltage, acts of God or while in transit.
- Installation/repair work is carried out by persons / agency other than authorized by the company
- The completed warranty card is not presented
The warranty does not cover shipping fees
- Within 14 days from the date of purchase: shipping fees on the company
- After 14 days from the date of purchase: shipping fees on the customer
- This product has passed strict quality control before shipment and has passed our comprehensive inspection.
- The warranty is applicable within 1 year from the date of purchase only for defects in performance or function of the product, provided the product has been handled properly for its intended use
- This warranty will not be reissued.
- This warranty is only valid in Korea.
IMPORTAT SAFETY INSTRUCTIONS
Basic precautions should always be followed when using electric product. please read all the instructions before using this product.
- Do not use the product in extreme temperatures or humid conditions.
- Do not store your device near or in heaters, microwaves, hot cooking equipment, or high pressure containers
- Do not store your device near magnetic fields
- Do not use damaged power cords or plugs, or loose electrical sockets
- Do not handle a damaged or leaking Lithium Ion (Li-Ion) battery
- Do not use the device if the screen is cracked or broken
- Do not disassemble, modify, or repair your device
- Do not expose the device to high concentrations of particulate matter for a long time on purpose
- Allow only qualified personnel to service your device
- Errors may occur depending on the environment and method of use
- The measured numeric figures are only for personal use. The manufacturer does not take any legal responsibility for the measurement
- The manufacturer does not take any legal responsibility for any loss or disadvantage caused by customers
- When air level rise to a certain level the alarm rings, press the upper button to turn off the alarm sound and the notification. mark will appear on the device and app until the air level goes down. However, if the CO does not go down even after 5 minutes after the alarm starts, the alarm may sound repeatedly through the app.
- CO sensor’s life expectancy is about 3 years. However, long-term exposure to high concentrations of CO may make CO sensor’s life expectancy shorter. We recommend that you exchange it for a new product after the device is exposed to high concentrations of CO.
FCC
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
WARNING: This equipment may generate or use radio frequency energy.
Changes or modifications to this equipment may cause harmful interference
unless the oddifications are expressly approved in the instruction manual.
The user could lose the authority to operate this equipment if an unauthorized
change or modification is made.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications, However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
IMPORTANT NOTE: FCC RF Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 20 centimeters between the radiator and your body. This
transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
[ISED] This device complies with Industry Canada license-exempt RSS
standard(s). Operation is subject to the following two conditions: (1) this
device may not cause interference, and (2) this device must accept any
interference, including interference that may cause undesired operation of the
device.
Measuring Ranges by Sensors
TVOC | 1~500 index |
---|---|
CO₂ (carbon dioxide) | 0~40,000ppm |
CO (carbon monoxide) | 0~500ppm |
Particulate Matter | 0~1,000ug/m3 |
Temperature | -40℃~125℃ |
Humidity | 0~100% |
Air Quality Standards
| | | | |
---|---|---|---|---|---
Pollutant| Good| Moderate| Poor| Severe
PM 2.5
(㎍/㎥)| Korea| 0~15| 16~35| 36~75| 76~
WHO| 0~25| 25~37.5| 37.6~50| 51~
PM 10
(㎍/㎥)| Korea| 0~30| 31~80| 81~150| 151~
WHO| 0~50| 51~75| 76~100| 101~
Carbon Dioxide ppm (㎎/㎥)| ~1,000| ~1,499| 1,500~2,499| 2,500~
Carbon Dioxide ppm (㎎/㎥)| 0~9| 10~49| 50~199| 200~
VOC ppb (㎎/㎥)| ~199| ~599| ~1,999| ~9,999
A/S : 1661-1294
Contact : cs@bluefeelcorp.com
Homepage : www.bluefeelcorp.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>