MANGO POWER mPanel Pro Instantly Switches User Manual
- June 15, 2024
- mango power
Table of Contents
mPanel Pro User Manual
mPanel Pro Instantly Switches
mPanel Pro User Manual
These instructions apply to the MANGO POWER mPanel Pro device. Please read this user manual carefully before installing or using the mPanel Pro device. Keep this user manual in a safe place for future reference.
Safety Precautions
Before installing, maintaining, or using the MANGO POWER mPanel Pro in any
way, please read this user manual carefully and comply with all the rules and
warnings provided. Do not operate this device contrary to the regulations of
this user manual as it may lead to equipment damage, electric shock, severe
injury, or even death.
The operator of this device must be proficient in understanding the condition
of the equipment, the safety information provided, and the necessary
precautions before any installation, operation, inspection, or maintenance.
This user manual categorizes safety precautions into two levels: “ Danger”
and “ Warning”
Danger: Flawed operating may be extremely dangerous and result in severe
injury or death.
Warning: Flawed operating may be dangerous and result in moderate or mild
injuries and equipment or property damage.
The pictures in this user manual are for reference only and may differ
slightly from the actual product.
In order to ensure the continuous improvement of this manual, we reserve the
right to modify it.
No unit or individual is permitted to copy this user manual, or any part of
it, for commercial purposes without the written permission of the MANGO POWER
company.
Danger:
When dealing with any wiring, please ensure that the power is turned
off to avoid electric shock.
This equipment should not be installed in direct sunlight, humid
environments, or in any environment where rain or other liquids might make
contact with it as this increases the risk of electric shock.
Ensure reliable grounding to prevent electric shock and fire.
All work related to the device must be performed by qualified personnel
who have electrician certificates – including installation, operation,
maintenance, settings, and configuration.
Do not attempt to operate any of the switches or buttons of the device
with wet hands as it may lead to electric shock.
Please switch the power off when troubleshooting or cleaning any of the
equipment.
Do not place any objects on top of the product during installation, use,
or maintenance.
The electrical installation must comply with the local national
electrical safety standards and regulations.
Do not remove the rear bottom plate of the device during circuit
operation as there is a risk of electric shock.
Do not touch any uninsulated wires when opening the protective cover on
the product as there is a risk of electric shock.
Do not place flammable or potentially explosive materials near the
device.
All warning labels and nameplates on mPanel Pro should be clearly
visible at all times and must not be removed, covered, or pasted over.
**** Please keep children away from mPanel Pro and its related systems to
prevent the risk of electric shock.
Warnings:
For optimal use and maintenance, the space surrounding the device should not
be less than 400mm and the device’s height off the ground should not be less
than 1000mm.
Only after the device is installed in its place should any electrical wiring
be carried out.
Protective sleeves must be added to the incoming and outgoing wires of the
device.
Confirm that the circuit breaker and all incoming/outgoing wires meet the
requirements of the device during wiring.
Use special prescribed tools for the installation and wiring of the device.
If any damage to the mechanical or electrical components of the device is
noted, immediately stop the installation, and contact the supplier promptly.
If any malfunction occurs during use, turn off the power and check the cause
of the malfunction.
Do not strike the device while trying to repair it as it will only damage the
equipment.
Switch the power supply off when performing maintenance checks and cleaning.
Live maintenance must be performed by professionals with the required
protective measures.
Do not modify any critical components of the device as it may lead to
property, personal, or product harm..
Do not use damaged, broken, or worn wires and connectors. Protect the wires
from physical damage – such as compression, door closures, or being tied into
knots or stepped on.
Do not place incoming and outgoing wires in areas where water or other liquids
may come into contact with them.
Product Introduction
2.1 Overview
This product is an electrical control distribution box designed for MANGO
POWER Union and MANGO POWER E products. The mPanel Pro connects the MANGO
POWER Union or MANGO POWER E to the load to assist in automatically switching
the energy supply between the grid and the MANGO POWER backup power sources.
Note: When two MANGO POWER E units are connected in parallel, the output
voltage can support a 240V split-phase and allows them to meet the
requirements of most household appliances.
2.2 What’s in the BOX
| No. | Type | Quantity |
|---|---|---|
| 1 | mPanel Pro | |
| 2 | Expansion plug | |
| 3 | Self-tapping screw | |
| 4 | Manual | |
| 5 | Warranty Card | |
| 6 | AC Input Cable for POWER Move | |
| 7 | AC Input Cable for POWER Home | |
| 8 | AC Output Cable |
MANGO POWER E
| No. | Type | Quantity |
|---|---|---|
| 1 | mPanel Pro | |
| 2 | Expansion plug | |
| 3 | Self-tapping screw | |
| 4 | Manual | |
| 5 | Warranty Card | |
| 6 | AC Input Cable | |
| 7 | AC Output Cable | |
| 8 | E-Link Cable |
2.3 Product specification
| Product | mPanel Pro | Size | 554280108mm |
|---|---|---|---|
| Mains input voltage | 120V, 240V | Mains input current | 50A |
| Output port | 2×30A | Backup input Port | 2×30A |
| Load output port | 4x15A | Working temperature | -10°C- 45°C |
2.4 Features
| NO. | Name | Description |
|---|---|---|
| 1 | Rotary Switches | Controls the output circuit to accommodate the power |
supply of four output circuits and allows the power supply to be quickly
switched between the grid and the power backup solution.
2| Grid Breaker| Controls the shutdown of the mains input.
3| Output Breaker| Controls the shutdown of the mains input
3| Neutral load AccessTerminal| Connects to the output neutral wire line.
4| Live Load Access Terminal| Connects to the output live wire – the maximum
current of a single port is 15A.
5| Mains Input| The mains input live wire is connected to the L terminal, the
mains input neutral wire is connected to the N terminal, the earth wire is
connected to the PE terminal, and the maximum current is 50A.
6| Output-1 Port| Connects to the input port of MANGO POWER Union or MANGO
POWER E device – the maximum current is 30A.
7| Output-2 Port| Connects to the input port of MANGO POWER Union or MANGO
POWER E device – the maximum current is 30A.
8| Backup Input-1 Port| Connects to the output port of a separate Power Move,
Power Home, or MANGO POWER E device – the maximum current is 30A.
9| Backup Input-2 Port| Output port when connecting the MANGO POWER Union
device or 2 sets of the MANGO POWER E device – the maximum current is 30A.
Product Installation
3.1 Materials Required for Installation
-
Power cables:
A 6 AWG black silicone cable, a 6 AWG white silicone cable, and a 6 AWG greenyellow silicone cable.
A 12 AWG black silicone cable and a 12 AWG white silicone cable. -
Tools:
Power drill, screwdriver, and insulated gloves
3.2 Product Fixing
- Mark the positions of the three fixing holes on the wall where the product needs to be installed. Use a power drill to make holes at the marked positions for installation, insert expansion plugs into the holes, and screw a self-tapping screw into the top screw hole.
- Hang the mPanel Pro on the top screw that was just inserted so that the two lower screw holes align with the installation holes below the mPanel Pro. Take out the other 2 self-tapping screws, align them with the two holes, then insert and tighten them.
3.3 Wiring steps (1) Open the bottom cover then use a screwdriver to
unscrew the protective cover screws and remove the inner cover. Put the
prepared silicone cable onto the protective tube, and take measures to protect
the exposed wires outside of mPanel Pro.
a. Use the 6AWG wire to connect the home AC distribution box and the mPanel
Pro AC input: the 6AWG black silicone cable connects to L1/L2, the 6AWG white
silicone cable connects to N, and the 6AWG yellow-green silicone cable
connects PE.
b. Use the 12AWG black silicone cable to connect the energy supply to the
mPanel Pro load input for the hot wire: L1/L2.
c. Use the 12AWG white silicone cable to connect the load to the mPanel Pro
load input for the neutral wire: N.
d. After the wiring is completed, tighten the protective cover screws with a
screwdriver and place the protective cover back on the device.
(2) Use the AC input cable and AC output cable to connect the MANGO POWER
Union or MANGO POWER E devices to the mPanel Pro:
MANGO POWER Union:
a. Use the AC input cable to connect the mPanel Pro’s backup input to the
Power Home’s 40A home backup outlet or the Move’s 30A AC outlet. (When only
the Power Move or Power Home is available, the AC input cable can only be
connected to the mPanel Pro’s Backup Input-1.)
b. Use the AC output cable to connect the mPanel Pro’s Output-1/Output-2 to
the Power Home or Power Move’s grid AC input.
MANGO POWER E:
For 1 MANGO POWER E device:
a.Use the AC input cable to connect the mPanel Pro’s Backup Input-1 to the
MANGO POWER E’s 30A AC outlet.
b. Use the AC output cable to connect the mPanel Pro’s Output-1/Output-2 to
MANGO POWER E’s GRID AC INPUT.
For 2 MANGO POWER E devices:
a. Connect 2 MANGO POWER E devices using the E-link cable then use the AC
input cable and AC output cable to connect the input/output ports.
Function Usage Introduction
After the successful installation of mPanel Pro, turn on the backup mode for
the MANGO POWER Union or MANGO POWER E and switch between mPanel Pro Backup
and Grid modes by controlling the knob switch.
4.1 Backup Mode
- Turn the knob switch to the backup position then turn on the grid breaker. The output port can then charge the MANGO POWER Union or MANGO POWER E devices. Turn on the output breaker and the MANGO POWER Union or MANGO POWER E device can supply power to the load. The L1-N and L2-N can output four 120V circuits.
- If 2 MANGO POWER E devices are connected in parallel, the MANGO POWER E can output two L1-L2-N 240V split-phases. Note: When two MANGO POWER E devices are connected in parallel and the backup mode is turned on, only discharge is allowed and not charging. To charge, turn off the MANGO POWER E’s backup mode.
- If it is necessary to stop supplying power to the load, the output breaker can be selectively turned off as needed.
4.2 Grid Function
- Turn the knob switch to the grid position then turn on the grid breaker and switch to the utility power in order to supply power to the load, the MANGO POWER Union device, or the MANGO POWER E device. The L1-N and L2-N can output four 120V circuits, and L1-L2-N can output 240V.
- If it is necessary to stop supplying power to the load, the output can be selectively turned off as needed or the grid breaker can be used to turn off the utility power input source.
Shenzhen Xihe Future Technology Co.,Ltd
Please scan this QR code for more product information
https://www.mangopower.com/us/support/download/index
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>