CASIO 5344 Simple Easy-to-use Design Watch User Guide

CASIO 5344 Simple Easy-to-use Design Watch

CASIO-5344-Simple-Easy-to-use-Design-Watch-PRODACT-IMG

• .Your watch may differ somewhat from the one shown in the illustration.
• Some models may use a combination of hands and rotating disks to indicate information. The word “hand” in this section is used to mean both analog hands and rotating disks.
• The dials of some models have double-ended hands. Depending on the data, either end can be used for indication.

Stopwatch functions

To adjust the time setting

Note

• Take care that you set the correct AM or PM time.
• When changing the time, move the minute hand four or five minutes past your final setting, and then back it up to the setting you want.

To change the day indicator setting

Note

• The day indicator setting uses a 31- day month. Make adjustments for months of shorter lengths.
• Avoid changing the day indicator setting between the hours of 9 p.m. and 1 a.m. Otherwise, the day indicator may not change correctly at midnight.

Crown Operations

• Some water-resistant models (100 meters, 200 meters) have a screw-in rown. When you need to perform a crown operation, rotate it towards you to unscrew it. Then pull the crown out. Avoid applying undue force when pulling. The watch loses its water resistance while the crown is unscrewed. After performing a crown operation, fully srew the crown back in.

If your watch has a rotary bezel..

• 
  You can rotate the bezel to align its mark with the minute hand. Then you will be able to tell how much time has elapsed since aligning the mark.

Using the Stopwatch

• The stopwatch measures elapsed time in 1-second increments up to 59 minutes, 59 seconds.

Important!
Do not operate the stopwatch with the crown pulled out.
Note
An elapsed time operation will stop automatically at the end of 60 minutes.

Correcting the 0 Positions of the Hands

• Perform the following procedure if the stopwatch hands do not return to their 0 (zero) positions when you reset the stopwatch.

Important!

• Timekeeping stops while the crown is pulled out. Correct the current time setting after performing the above operation.

Specifications

• Accuracy: +20 seconds average per month
• Stopwatch: Measuring Capacity: 59’59” (60 minutes)
• Measuring Unit: 1 second
• Measurements: Elapsed time; split time; two finishes
• Battery: One silver oxide battery (Type: SR920SW)
• Battery Life: Approximately 2 years (60 minutes stopwatch operation per day)

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>