HEHUI S7 Bluetooth Stereo Flashlight Selfie Stick Instructions

HEHUI S7 Bluetooth Stereo Flashlight Selfie Stick

Function Features

• Power bank
• Cellphone holder
• Bluetooth stereo
• Flashlight
• Selfie stick
• Slcone nutber dust plug
• TF card player

Open the selfie stick to take selfies

Before using the selfie function, open your Bluetooth. Make sure Bluetooth is connected with your mobile phone. Then you need to stretch the stick to the required length, and lip your phone with the selfie stick clamp. Next, adjust the shooting angle, open the phone’s camera function, short press the selfie button above the stereo, and you can complete the selfie function.

Recharge your stereo

Open the silicone rubbery dust cap on the top of the machine. Then insert the end of the charging line into the Micro USB interface (Figure 10 ), and the other end (the larger one) into the 5V charger or computer USB interface, after which the machine enters the state of charging. In the process of charging, the LED power supply light will change from red to blue. When the fourth blue light is illuminated, the machine is fully charged.

Recharge your mobile phone or other digital devices
Open the silicone rubbery dust cap on the top of the machine. Then insert the end of the charging line into the USB interface (Figure 11 ), and the other end into your phone or other digital devices.

Bluetooth pairing connection

That the Bluetooth indicator light keeps flashing means the stereo is in the search of matching Open your mobile phone Bluetooth function, then find and lick the equipment name of “SPORT in Bluetooth device. Then the machine will automatically enter the paring mode. There will be a waning tone after the successful pairing. The machine will automatically enter sleep mode if it is still unpaired after 3 min. Then please restart your Bluetooth for another connection.

OVERVIEW

1.  Bluetooth switch/Selfie button
2. Prev. song/ Volume-
3. Next song/Volume+
4. Flashlight / Pause
5. Selfie stick clamp
6. Hanging buckle
7. Mountaineering buckle
8. Bluetooth indicator light
9. Battery indicator light
10. Micro USB charging port
11. Power outlet /U-disk player
12. Micro TF Card

Buttons Operating Instruction

Use of TF Card
Open the silicone rubbery dust cap on the top of the machine. Insert the TF card into the Micro TF card slot (icon 12), and long press the Bluetooth button to open the Bluetooth. Then it can play the music stored in the TF card.

Product technical specifications

• Speaker size: 40mm
• Speaker resistance: 40
• Speaker output power: 3W
• Power input: DCSV/1A
• Power output: DC5V/1A
• Battery type: 18650 lithium-ion battery
• Battery capacity: 2000mah/5200mah
• Product size: 182x49mm

Notes

1. Do not adjust the output voltage higher than the device voltage; otherwise, it may cause damage to the equipment. Please be sure of this before using.
2. Please use the specified charger
3. Prohibit from short circuits, breaking down, or throwing into the fire
4. Do not disassemble the charger and battery to transform.

FCC

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and(2)this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radiocommunications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirements.The device can be used in portable exposure conditions without restriction

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>