boAt Rockerz 378 Wireless Bluetooth Earphones User Manual

Rockerz 378 Wireless Bluetooth Earphones
User Manual

Rockerz 378 Wireless Bluetooth Earphones

boAt
ROCKERZ 378
Thank you for choosing boAt Rockerz 378. This manual is meant to guide you through the functionality of the wireless earphone neckband. Knowledge of Bluetooth and device connection is essential for the usage of the headset Therefore, we strongly advise that this manual be thoroughly read before use, and referred to in times of difficulty, so that you can always be easily guided towards the shores of musical bliss.

PACKAGE CONTAINS:

• 1 x boAt Rockerz 378
• 1x USS Type C charging cable
• 2x Additional Earmuffs
• 1 x User Manual
• 1x Warranty Card
• 1 x Catalogue
  

PRODUCT OVERVIEW

TO PAIR WITH BLUETOOTH

1. When switched off, press and hold the MFB Multifunction Button) for 3 seconds to switch on the wireless earphones and put them Into pairing mode. The earphones automatically enter pairing mode with a voice prompt ‘pairing’, the blue and red LEDs flash alternatively to indicate the same.
2. Open Bluetooth functionality on your media device and search for “Rockerz 378” from the list of available devices.
3. Choose “Rockerz 378” from the list and If asked for a passcode, enter the pairing code “0000” to establish Bluetooth connectivity.
4. Once successfully connected, the blue LED flashes every 10 seconds to indicate the same
   Note: The wireless neckband automatically turns off If there Is no pairing established in 5 minutes.

FUNCTIONALITIES

1. Power on: When switched off, press and hold the MFB for 3 seconds The voice prompt “Power On” confirms the same The blue LED flashes once to indicate the same
2. Power off: In powered on state, press and hold the MFB for S seconds. The voice prompt “Power Off” confirms the same The red LED flashes once before the device gets turned off
3. Play/Pause: Single tap the MFB to play/pause music at your convenience.
4. Volume Up: Tap the Volume Up button in steps to increase the volume. The voice prompt “Volume Max” indicates maximum volume
5. Volume Down: Tap the Volume Down button in steps to decrease the volume.
6. Answer/End call: Tap the MFB once when answering or ending a call to complete’ action
7. Reject call: Press and hold the MFB for 2 seconds during an incoming call to reject the call
8. Previous Track: To go back to the previous track or start the track from beginning, press and hold rho Vorume Down button for 2 seconds.
9. Next Track: To skip to the next track, press and hold the Volume Up button for 2 seconds.
10. Reset Device (Clear Paired List): Press and hold the Volume Up and Volume Down buttons simultaneously for 5 seconds to clear the list of paired devices. The red and blue LEDs flash quickly for 2 seconds to indicate the same
11. Voice Assistant: Double press the MFB to wake up smart voice assistant
12. BEAST” Mode with Spatial Bionic Sound Tuned by TH): Single press the Ouick Switch button to switch to Low Latency (BEAST’) mode infused with Spatial Bionic Sound Tuned by THr. Once switched on, it gets notified via a prompt

Single press the Quick Switch button to turn off BEAST Mode and Spatial Bionic Sound Made for the Garners – By Gainers, the BEAST:” Mode reduces the latency significantly and improves the overall gaming experience On the other hand. Spatial Bionic Sound Tuned by THXT” offers Impeccable spatial sound developed for a superior listening experience.
“Tuned by THX- a a trademark belonging to THX Ltd.”

TO CHARGE Use a use Type C charging cable to charge the earphone through either a laptop or an adaptor.

1. Low Battery: When the remaining battery is below 20%. there is a ‘Battery Low’ prompt every 5 minutes and red LED quickly flashes 5 times every few seconds to indicate the same.
2. Charging: Solid red LED indicates that the earphone is being charged (please note that the earphone cannot / should not be turned on while charging).
3. Fully charged: Solid blue LEO indicates the same.

SAFETY CAUTIONS

• Please don’t dismantle the product In any way or remove the product’s battery by yourself, as this can lead to a fire or electrical breakdown. Any maintenance or servicing of the earphones should be done only through a qualified service provider/manufacturer.
• Please clean the earphones with the utmost of care with only a damp soft cloth, if cleaning is required. Please do not use any oily volatile liquid. In addition, ensure that the earphones are kept away from extremely hot or cold substances.
• Any damage to the earphones that is NOT a manufacturing issue will make the products warranty null and void.
• Do not use earphones when it is unsafe to be wearing them, such as while operating a vehicle, crossing a street, or during any activity where full awareness of your surroundings is required.
• To avoid damage to your hearing, make sure that the volume on your music player is at an appropriate level when you are putting on the earphone. Exposure to any noise levels at or above 85 dB can gradually lead to a loss of hearing.

SPECIFICATIONS

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>