hama 00054253 DIR1570CBT Digital Radio User Guide

: June 9, 2024
: Hama

Table of Contents

hama 00054253 DIR1570CBT Digital Radio
Controls and displays
Important information – Quick-reference guide:
Explanation of warning symbols and notes
Package contents
Safety instructions
Warning – laser
Before commissioning
Commissioning
General notes on use
Language
Care and maintenance
Warranty disclaimer
Declaration of conformity
Consumption information according to directive
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

hama 00054253 DIR1570CBT Digital Radio

Technical Data

Technische Daten

Display| 2.4″ (6,09 cm) Color display
Speaker

Lautsprecher

| 3″ 2X5W (RMS)
Power Supply

Stromversorgung

| Built in power supply, AC100-240V, Output power 28W
Supported Languages

Unterstützte Sprachen

| English, German, Danish, Dutch, Finnish, French, Italian, Norwegian, Polish, Portuguese, Spanish, Swedish, Turkish, Czech, Slovak
Packaging Content

Verpackungsinhalt

| Hama DIR1570CBT, Quick Start Manual
Connectivity

Konnektivität

WiFi| 2.4GHz (b/g/n) / 5GHz(a/n)
Bluetooth| Receiver (RX): 5.2, class 1, A2DP, AVRCP
USB

(FAT32 File System)

| Charge: 5V / 1A Playback: :MP3, WMA
Audio Connectors

Audio Anschlüsse

Inputs| AUX In 3.5mm
Outputs| Headphone 3.5mm
Sources Presets

Quellen Favoriten

CD (Drawer Type)

CD (Schubladenlaufwerk)

| ****

–

DAB/DAB+

(174.928 – 239.2 MHz)

| ****

30

FM

(87.5 – 108 MHz)

| ****

30

Internet Radio| | 30
Podcasts| | –

Controls and displays

hama 00054253 DIR1570CBT Digital Radio 1

A: Front

[MENU/SETTINGS] button
[MODE] button
[HOME] button
[BACK] button
[POWER/VOLUME/ENTER/NAVIGATE] button
Button (CD eject)
USB connection
Headset connection (3.5 mm)
Aux-IN (3.5 mm)
CD drive
Display
[PRESET 1] button
[PRESET 2] button
[PRESET] button
[Play/Pause] button
[Forward] button
[Back] button

B: Rear

hama 00054253 DIR1570CBT Digital Radio 2

Antenna

Note

Turning the controller allows you to change the volume or navigate through the menu structure. Pressing this rotary controller puts the device in standby mode (volume control) or confirms a selection (navigation control).

Important information – Quick-reference guide:

This quick-reference guide contains the most important basic information, such as safety instructions and the steps necessary to operate the product.
To help protect the environment and conserve valuable raw materials, Hama does not issue a printed manual and instead makes this available exclusively as a PDF download.
The full text of the manual is available at the following internet address: www.hama.com -> 00054253 -> Downloads
Save the manual on your computer for reference and print it out if possible.

Explanation of warning symbols and notes

Risk of electric shock
This symbol indicates a risk of electric shock from touching uninsulated product parts that may carry hazardous voltage.

Warning
This symbol is used to indicate safety instructions or to draw your attention to specific hazards and risks.

Note
This symbol is used to indicate additional information or important notes.

Package contents

DIR1570CBT Digital/Internet Radio with CD
These operating instructions

Safety instructions

The product is intended for private, non-commercial use only.
Do not use the product in areas in which electronic products are not permitted.
Protect the product from dirt, moisture and overheating and use it in dry rooms only.
As with all electrical products, this device should be kept out of the reach of children.
Do not drop the product and do not expose it to any major shocks.
Do not operate the product outside the power limits given in the specifications.
Keep the packaging material out of the reach of children due to the risk of suffocation.
Dispose of packaging material immediately in accordance with the locally applicable regulations.
Do not modify the device in any way. Doing so voids the warranty.
Use the product only for the intended purpose.
Do not use the product in the immediate vicinity of heaters, other heat sources or in direct sunlight.
Do not use the product in a damp environment and avoid splashing water.
Only use the article under moderate climatic conditions.
The product is intended only for use inside buildings.
The product must only be operated on a supply network as described on the type plate.
Route all cables so there is no risk of tripping.
Do not bend or crush the cable.
Always pull directly on the plug when disconnecting the cable, never on the cable itself.

Warning – laser

Do not look directly at the laser beam! Close your eyes and turn your head away if your eyes meet the laser beam.
Do not look directly at the laser beam using optical instruments!
This product contains a class 1 laser for consumers compliant with EN50689:2021

Risk of electric shock

Do not open the device or continue to operate it if it becomes damaged.
Do not use the product if the AC adapter, the adapter cable or the mains cable are damaged.
Do not attempt to service or repair the product yourself. Leave any and all service work to qualified experts.

Before commissioning

Note: A detailed description of the UNDOK app and all of its functions can be found in our UNDOK guide at:

Setting up a network connection WLAN (wireless network)

Ensure the router is switched on, is functioning correctly and that there is a connection to the Internet.
Activate your router’s WLAN function.
To ensure the correct functioning of your WLAN connection, follow your router’s operating instructions.
Then proceed as described under point 5, “Getting started”.

Commissioning

Note – optimising reception

Please note:Always pull the antenna out completely.We recommend you adjust the antenna vertically to ensure optimal reception.

General notes on use

Switch On / Off / Standby

Press [POWER/VOLUME/ENTER/NAVIGATE] (5) to switch on the radio.
Press and hold [POWER/VOLUME/ENTER/NAVIGATE] (5) for 3 seconds to switch the radio off (standby).
To completely switch off the device, disconnect it from the power supply.

Navigation and control

After pressing a shortcut button, navigate through the menu items using.
Select the individual menu items by turning [POWER/ VOLUME/ENTER/NAVIGATE] (5).
Confirm the selection by pressing [POWER/VOLUME/ ENTER/NAVIGATE] (5).

Volume adjustment

Turn the volume up (right) or down (left) by turning [POWER/VOLUME/ENTER/NAVIGATE] (5) accordingly.

Switching on

Warning

Only operate the product from an approved socket that is connected to the public power supply. The socket must be installed close to the product and must be easily accessible.
Disconnect the product from the power supply using the On/Off switch – if this is not available, unplug the power cord from the socket.
If using a multi-socket power strip, make sure that the total power consumption of all connected devices does not exceed the power strip’s maximum throughput rating.
If you will not be using the product for a prolonged period, disconnect it from mains power.
Connect the mains cable to a properly installed and easily accessible mains socket.
Wait until the radio has initialised fully.
Press [POWER/VOLUME/ENTER/NAVIGATE] (5) to switch on the radio.

Note – switching on for the first time

The Setup Wizard starts up automatically when the device is turned on for the first time.
At the initial start-up, the system interface will ask about the preferred language. Select your preferred language.

Language

To change radio’s menu language, proceed as follows:

Press [ ] (1) to access the Settings menu.
Use [POWER/VOLUME/ENTER/NAVIGATE] (5) tonavigate to the “System Settings” menu item.
Confirm the selection by pressing [POWER/VOLUME/ ENTER/NAVIGATE] (5).
Use [POWER/VOLUME/ENTER/NAVIGATE] (5) to navigate to the “Language” menu item. Confirm the selection by pressing [POWER/VOLUME/ENTER/
NAVIGATE] (5).
Use [POWER/VOLUME/ENTER/NAVIGATE] (5) to select your preferred system language.
The language setting currently selected is marked with an asterisk (*).

Note: The following languages are available:Czech, English, Danish, Dutch, German, Finnish, French, Italian, Norwegian, Polish, Portuguese, Slovak, Spanish, Swedish and Turkish

Care and maintenance

Note

Disconnect the device from the mains before cleaning and during prolonged periods of non-use.

Only clean this product using a lint-free, slightly damp cloth and do not use any harsh cleaners.
If you do not plan to use the product for a prolonged period, turn off the device and disconnect it from the power supply. Store it in a clean, dry place away from direct sunlight.

Warranty disclaimer

Hama GmbH & Co KG assumes no liability and provides no warranty for damage resulting from improper installation/ mounting, improper use of the product or from failure to observe the operating instructions and/or safety notes.

Declaration of conformity

Hama GmbH & Co KG hereby declares that the radio equipment type [00054253] is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following Internet address: https://uk.hama.com 00054253 Downloads

Frequency band(s)	Maximum radio-frequency power transmitted
Bluetooth: 2,402 – 2,480 GHz	6.5 dBm (EIRP)
WiFi: 2,400 – 2,480 GHz	15.5 dBm (EIRP)
WiFi: 5,150 – 5,350 GHz	16.5 dBm (EIRP)
WiFi: 5,470 – 5,725 GHz	16.5 dBm (EIRP)
WiFi: 5.735 – 5.835 GHz	11 dBm (EIRP)

Restrictions or Requirements inBelgium, Bulgaria, Czech Republic, Denmark, Germany, Estonia, Ireland, Greece, Spain, France, Croatia, Italy, Cyprus, Latvia, Lithuania, Luxembourg, Hungary, Malta, the Netherlands, Austria, Poland, Portugal, Romania, Slovenia, Slovakia, Finland, Sweden, United Kingdom

Note
If channels 36-64 (channels of frequency 5150 MHz – 5350 MHz) are used, the device may only be used in closed rooms.

To limit exposure to electromagnetic fields
This device is intended for use at a distance of at least 20 cm from the body of the user or persons nearby. This device must not be worn or carried on the body.

Consumption information according to directive

Status

| Duration of trigger time| Energy consumption (Watt)
---|---|---
Off state

0/I mains switch

(only on devices with 0/I mains switch)

|

–

|

≤ 0.50 W

Manual standby

(Ready state (Standby) on devices without information or status indicator (manual)*)

|

–

|

≤ 0.50 W

Manual standby

(Ready state (standby) on devices with information or status indicator (manual)*)

|

–

|

≤ 1.00 W

---|---|---
Automatic ready state

(Standby on devices without information or status indicator**)

|

≤ 20 min

|

≤ 0.50 W

Information or status display

(Automatic ready state (Standby) on devices with information or status indicator**)

|

≤ 20 min

|

≤ 1.00 W

Networked standby mode***| ≤ 20 min| ≤ 2.00 W

Please note that the actual power consumption can be dependent on multiple factors. These include the personal settings, the operating mode, the ambient temperature and the firmware version of the product used. The values set out above represent maximum values. The actual reference values can be found at: www.hama.com -> 00054253 -> Downloads -> Consumption information