HARD HEAD 019617 Spreader Wagon User Manual
- June 9, 2024
- Hard Head
Table of Contents
HARD HEAD 019617 Spreader Wagon
INTRODUCTION
Jula AB reserves the right to make changes to the product. Jula AB claims copyright on this documentation. It is not allowed to modify or alter this document in any way and the manual shall be printed and used as it is in relation to the product. For the latest version of operating instructions, refer to the Jula website.
SYMBOLS
TECHNICAL DATA
DESCRIPTION
Universal spreader for spreading grit, seed, fertiliser, etc. With a foldable handle, puncture-proof wheels and spreader control.
Parts
Hopper
-
* **FIG. 1**- Spring cotter pin (R-pin): rotates and broadcasts the fertiliser when the spreader is moving.
- FIG. 2
- Control lever for opening and closing the spreader plate.
- FIG. 3
- Adjustment of the control lever cable – for adjustment of output.
- FIG. 4
- Spreader rotor.
- FIG. 5
- Wheels with rotor drive mechanism.
- FIG. 6
- Screw for securing U-shaped handle.
- FIG. 7
USE
- Before use, adjust the outlet to the setting required for the product being spread.
- Check that the control lever cable is taut with the threaded adjuster screw.
- Take hold of the U-shaped handle and start walking with the product. Pull the control lever to open the spreader
MAINTENANCE
- Do not leave fertiliser in the hopper for a prolonged period of time.
- Empty the hopper and carefully rinse out any residual fertiliser after each use.
- Use warm water to remove any stubborn residues. Allow the product to dry.
- Store the product in a clean and dry place.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>