NewQ NQ-DK-03 12 In 1 USB C Hub Docking Station User Guide
- June 9, 2024
- NewQ
Table of Contents
NewQ NQ-DK-03 12 In 1 USB C Hub Docking Station
HDMI Display Setup
HDMI Display for MAC OS
Notes before Use
- Make sure your Mac supports video output, and HDMI connector is fully inserted into HDMI ports of the docking station.
- For Mac OS laptop, it is turned on in Non-mirror Mode by default. The laptop screen can display different from the two external monitors.
- Mac OS DOES NOT support 3 different screens.
- HDMI port supports 4K 60Hz Max. If 4K 60Hz is required, please make sure your Mac & Monitor & HDMI cable support 4K 60Hz.
Connect the docking station to your Mac,
(tick as per your needs) to set up HDMI Display. Default: Non-mirror Mode.
Resolution Setting
to select the resolution supported by all devices.
Resolution Kindly Reminder
-
NewQ docking station supports 4K 60Hz Max.
The actual frame rate supported is subjected to the minimum resolution of the connected devices.
-
For Mac OS laptop, only one display device will be listed in Resolution Setting even when two display devices are connected.
-
For additional settings, go to ti> System Preferences> Displays.
Sound Setting
Connected with two display devices (with built-in speaker)
to select the display device. Both display devices will play with sounds, but
only one device is listed.
Or you can set direct”{ by clicking 1111 on the top right of the Status Bar.
Connected to two display devices (one without built-in speaker)
- If one of the display devices is not equipped with built-in speaker, the sound comes out from the Mac OS laptop by default.
- To transfer the sound to the display device with speaker, unplug the one without built-in speaker, then follow the Step 1 to select the display device.
Connected to audio devices
When connected with headphones or other audio device, go to System
Preferences > Sound > Output to select the audio device.
Notes before Use
- Make sure your Windows laptop supports video output, and HDMI connector is fully inserted into HDMI ports of the docking station.
- Two HDMI ports share 4K 60Hz Max. If 4K 60Hz is required, please make sure your Windows laptop & Monitor & HDMI cable support 4K 60Hz.
HDMI Display for Windows OS
Mirror Mode 1:
Mirror Mode 2:
Press 
Right-click on the desktop +
Display settings + Multiple displays + Duplicate desktop on 1 and 3 + Keep
changes .
Extend Made 1:
Extend Mode 2:
Press Right-click on the desktop +
Display settings + Select and rearrange displays + Apply + Multiple displays +
Duplicate desktop on 2 and 3 + Keep changes.
Second Screen Only Mode :
- Right-click on the desktop
- Display settin911
- Advanced display settings
- Select the corresponding Display (1/2/3)
- Click “Display adapter properties for Display 1”
Click ·uat All Modet1″, select the resolution supported by all devices and Apply.
NewQ docking station supports 4K 60Hz Max.
- In Extend Mode: The resolution of the connected devices can be set separately (share 4K 60HZ MAX).
- In Mirror Mode: The actual frame rate supported is subjected to the minimum resolution of the connected devices.
Right-click the at the bottom right of the Taskbar
Sound•
“Playback” tab to select the device to be played .
For convenient settings, please 90 to Graphics Control Panel.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>