XARALYN Levico 70 3D LED Fireplace Instruction Manual

: June 9, 2024
: Xaralyn

Table of Contents

Levico 70 3D LED Fireplace
Getting started
Speciﬁcations:
Control
Remote control
Troubleshooting
Extra information
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Levico 70 3D LED Fireplace
Instruction Manual XARALYN Levico 70 3D LED
Fireplace Manual
Electric Fireplace
Levico 70
3D LED Fireplace

Levico 70 3D LED Fireplace

Important safeguards
Please read the safety advice carefully before using the appliance
Warning: Warning: risk of ﬁ re, electric shock, physical injuries and material damage. Before using this appliance, always follow the safety advice during assembly, use and maintenance.
Safety advice (use)

This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
Children of less than 3 years should be kept away unless continuously supervised.
Children aged from 3 years and less than 8 years shall only switch on/off the appliance provided that it has been placed or installed in its intended normal operating position and they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children aged from 3 years and less than 8 years shall not plug in, regulate and clean the appliance or perform user maintenance.
CAUTION : Some parts of this product can become very hot and cause burns. Particular attention has to be given where children and vulnerable people are present.
WARNING : In order to avoid overheating, do not cover the heater.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualiﬁ ed persons in order to avoid a hazard
The appliance must not be used outdoors.
The appliance is intended for domestic use only, and is not suitable for household room illumination. Do not use this appliance for anything other than its intended purpose.
Do not operate the appliance in a room where ﬂ ammable liquids, solvents or varnishes are stored and/or where ﬂammable vapours may exist.
The appliance must be placed at a minimum distance of one metre from ﬂ ammable materials and objects (curtains, bedding, textiles, paper, etc.)
Do not attempt to disassemble this appliance, repair it or perform any modiﬁ cations yourself. This appliance does not contain any parts that can be used separately.
Keep plastic packaging out of the reach of children.
Air inlet and outlet vents must not be covered or obstructed under any circumstances. Do not insert any objects into these vents.
Do not exert pressure on or hit the of the appliance.
Do not set objects (wood logs, stones, pottery, etc.) on the electric ﬁreplace other than those designed for this purpose.
The heater must not be located immediately below a socket-outlet.
WARNING : Means for disconnection having a contact separation in all poles must be incorporated in the ﬁxed wiring in accordance with the wiring rules.
CAUTION : In order to avoid a hazard due to inadvertent resetting of the thermal cut-out, this appliance must not be supplied through an external switching device, such as a timer, or connected to a circuit that is regularly switched on and off by the utility.
WARNING : This appliance must only be used as a ﬁ xed appliance. It must be attached vertically and securely to a vertical wall. Any other position is potentially dangerous.
WARNING : This appliance is not protected against splashes of water. It is not suitable for use in a bathroom.
Do not use this heater in the immediate surroundings of a bath, a shower or a swimming pool.
CAUTION : to be installed by a professional in line with the installation standards applicable in your country (NF C15-100 for France or equivalent for other countries).

Points to check before beginning

For domestic use only.
Children or any other persons incapable of using the appliance safely must not use this appliance.
Please discard of plastic packaging appropriately and keep it out of reach of children.
The appliance is conceived to be used as a supplementary source of heat, not for the use as the main heating device

Getting started

Remove the appliance from the box.
Remove any packaging from the product.
Keep the package while the warranty is valid.
Mount the ﬁ replace. Then plug the power cord into a 230-volt earthed socket.

Speciﬁcations:

Consumption: 10 Watt
Maintenance-free
Functions with LED lights
Adjustable ﬂ ames
Remote control
Heating: 0 – 750 – 1500 Watt (adjustable)
Power: 220-240V ~ 50Hz
Plug: EU grounded
Warranty: 2 Years on

Operation
The ﬁreplace can be controlled with the panel on the unit or with the included remote control.

Control

To heat

Press the + or – button to adjust the heat setting to change. The heating starts when the set temperature is higher than room temperature.
Temperature range 10°C to 30°C.

Main switch

Push button A to the “ON” position (-) or to the “OFF” position (O).

Setting time

Press the button to start the ﬂame image or to stop.
The heating icon is displayed and the ﬁreplace starts to heat when the room temperature is lower than the temperature setting (default 10 degrees C.)
The clock icon ****will ﬂash if the time is not yet is set. Follow the steps in “Time setting” to set the time.
Two short beeps that are in pitch increase when enabled and three beeps that decrease in pitch when turned off. When switched on, the heating level, the set temperature and the clock icon ****is displayed. It display disappears after 60 seconds without any service. Press any button to activate the display again.

Lock the buttons

Hold the button for more than 6 seconds pressed to lock or unlock the buttons unlock, “LOC” is displayed and indicates the buttons are locked.
Once locked, “LOC” will ﬂ ash for 6 seconds and then disappears, press any button and “LOC” will ﬂ ash again.
Hold the button for more than 6 seconds

Button is never locked.
Adjust ﬂame image

Press button until “bri” blinks. Conﬁ rm with
Then press the + or – button to adjust the ﬂame level to change. The ﬂame height has 5 settings.

Set temperature H

Press button until “H” appears.
Adjust the setting with the + or – button
Conﬁrm the setting with

Set temperature L

Press button until “L” appears.
Adjust the setting with the + or – button
Conﬁrm the setting with

Celsius/Fahrenheit

Press button for 3 seconds until C or F appears.
Adjust the setting with the + or – button

Setting: Open window

Press until NNodE (MODE) appears.
Conﬁrm with
In the menu, select OPEN, ON or OFF. The heating function switches off when ON when the temperature in the room within 10 minutes with drops more than 4 degrees.

Timer

Press until appears. Conﬁrm with
Then press the + or – button to set the timer to set.

Menu other functions

Press until NNode appears. Conﬁrm with
Then press the + or – button to select the desired menu.

Setting: month

In the TIME menu, press + or – to select the M (MONTH).
Conﬁrm with and go to the next step

Setting: day of the month

In the TIME menu, press + or – to select the d (day of the month).
Conﬁrm with and go to the next step

Setting: clock (time)

Press until 7INNE (TIME) appears.
Conﬁrm with
In the menu, select day 1 to day 7 (D1 = Monday) and conﬁ rm with

Setting: hours

In the TIME menu, press + or – to select the H (HOUR) to select. Conﬁrm with and go to the next step

Setting: minutes

In the TIME menu, press + or – to select the M (MINUTES). Conﬁrm with and go to the next step

Setting: seconds

In the TIME menu, press + or – to select the S (SECONDS). Conﬁrm with and go to the next step

Setting: year

In the TIME menu, press + or – to select the Y (YEAR). Conﬁrm with and go to the next step

Setting: set weekly timer

Press **** until NNANU (MANU) appears.
Conﬁrm with

Setting: select the days

Y = selected; N = not selected

Set end time of the day

Enter the daily closing time, the time that is displayed for the ﬁ rst time is the closing time, First set the closing time,
Click on conﬁrm and then set the closing minutes in, as the digital tube becomes displayed, the leftmost display E 15: means the closing time is 3:00 PM, click the conﬁ rmation button, then set the minute in, the digital tube displays E:30, it means the closing time is 15:30, adjust the time with + or – button, click the conﬁrm button and go to the next step

Settings completed

If the display shows CON1, means this that the setting is complete. Press on the conﬁrmation button to check if use + or – button to select C0N2 CON3 CON4 FIN5H Selecting. When CON2 is selected, the setting from the ﬁ rst step.

Finish

FINISH means the setting is over, press on the conﬁrmation button and the weekly timing setting is complete

Use timer program
XARALYN Levico 70 3D LED Fireplace - fig 26

Press the Conﬁrm button and select MODE. Enter the function of PRO6 with the + or – button
Click the conﬁ rmation button to On and off to enter, select with the + or – button
ON means open, OFF means close, click the conﬁrm button to ﬁnish after the Selecting

Timer

XARALYN Levico 70 3D LED Fireplace - fig 27

Click the conﬁ rmation button to to go ON and YES to select with + or – button
ON means not clear, YES means clear. Click on the conﬁrmation button to complete
NOTE: A maximum of 24 programs can be set.

High or low heating

Go to high and low heat, ﬁrst give H high heating and then give L low heating again, use the + or – button to select H or L, then click the conﬁrmation button to set the temperature to start, default 10℃.
Use + or – button to select the desired temperature to select. For example, select H25, click the conﬁ rmation button and go to the next step

Set start time of the day ****

Enter the opening time of each day, the time that is displayed for the ﬁrst time, the opening time. First set the open hour, click conﬁrm and then set the open minute in, as shown on the display, the leftmost display S 10: it means that the opening time is 10:00 am, click on the conﬁrmation button to reset the minute set, the digital tube displays S: 45 minutes, this means the opening time is 10:45 am, beware turn on the time with + or – button, press conﬁrm to go to the next step

Remote control

Bediening
Use remote control Operation Service To operate the device with the remote control, the main switch (A) is in the ON position. All buttons on the remote control have exactly the same functions as on the control panel.
Using for the ﬁrst time
When using for the ﬁrst time Before using the remote control for the ﬁ rst time, pull the plastic seal to activate battery.
Empty battery
Empty battery If necessary, replace the battery with a CR2025 (3V) button battery XARALYN Levico 70 3D LED Fireplace - fig 30

Troubleshooting

The appliance does not turn on| Check if a circuit breaker the power supply to the device did not
interrupt
---|---
The appliance does not heat| Switch the appliance on for a few minutes to use the thermal circuit breaker reset
The appliance emits an odor| This can happen when the device for the ﬁ rst time is used or if it is long time has not been used. Clean the vents under the device

Extra information

Overheating protection

This device is equipped with an overheating protection. The ﬁreplace switches off automatically in case of overheating. For safety reasons the heating is not reset automatically.
To reset the device, disconnect the device from the power supply for at least 15 minutes. Plug the device back in and turn it on.

Cleaning
Warning: Unplug the appliance from the power point.
General cleaning instructions

The housing may be wiped with a slightly damp, lint-free cloth.
DO NOT use abrasive cleaners, scouring pads, or steel wool.
DO NOT use any cleaning agents.
If necessary, remove dust particles in the air outlet openings with a vacuum cleaner.

Environmental protection – Directive 2002/96/EC
**** To preserve our environment and protect human health protect electrical waste and electronic devices to be removed in accordance with the speciﬁ c rules agreed with the providers and the users.
For this reason, this device should not be offered as general municipal waste.
The user has the right to take it to amunicipal collection point, where the device is reused, recycled or used for other purposes in accordance with the Directive.

Power: 1500 W
Power supply: 220-240V ~ 50Hz
Class I
IP20 : This device is not protected against splashing water. It’s not suitable for use in a bathroom.
Lighting: LED; not replaceable

**** Complies with all relevant EU directives

T. (+31) (0)226 – 33 14 20
info@xaralyn.com
www.xaralyn.com