OMNIVISION OX03J10 3MP High Sensitivity CMOS SoC User Guide
- June 9, 2024
- OMNIVISION
Table of Contents
OX03J10 3MP High Sensitivity CMOS SoC
product brief
User Guide
OX03J10 3MP High Sensitivity CMOS SoC
140 dB HDR with LED Flicker
Mitigation Together in One SoC for Automotive Cameras
The OX03J10 is a 3MP high-sensitivity CMOS SoC for human vision and machine
vision automotive applications, including 360° surround view display systems,
rear view cameras and camera monitoring systems (CMS). It uniquely offers
simultaneous 140 dB HDR and industry-leading LED flicker mitigation along with
the best low light performance available.
The OX03J10 features 1920 x 1536 resolution in 1/2.4-inch optical format. The
OX03J10 comes in the industry smallest a-CSP™ package. Size and cost are
reduced due to the integration of the image signal processor with the sensor
together in one SoC.
The OX03J10 features OMNIVISION’s PureCel®Plus technology and uses a 3 µm Deep
Well™ split pixel. It outputs YUV and RAW simultaneously. It is ASIL-C
compliant.
Find out more at www.ovt.com.
Ordering Information
• OX03J10-E76Y-001A-Z (RGGB, lead-free) 76-pin a-CSP™, rev 1A, packed in
tray without protective film
Applications
• automotive
– 360° surround view system
– rear view camera
– camera monitoring system (CMS)
Technical Specifications
• active array size: 1920 x 1536
• maximum image transfer rate:
30 fps @ 1920 x 1536 (combined HDR in YUV422/RGB888 + 16/14/12-bit
(PWL) raw combined HDR)
• power supply:
– analog: 3.3V
– digital: 1.1V
– I/O pins: 1.8V or 3.3V
• power requirements:
– active: 560 mW (streaming 1920 x 1536 @ 30 fps typical)
• output interfaces:
up to 4-lane MIPI CSI-2| • temperature range:
operating: -40°C to +105°C sensor ambient temperature and
-40°C to +125°C junction temperature
• lens size: 1/2.44″ for 1920 x 1536 image size
• lens chief ray angle: 21.79°
• output formats: combined HDR in
YUV422/RGB888 + 16/14/12-bit (PWL) raw combined HDR, uncompanded 24-bit or
20/16/14/12-bit (PWL) raw combined
HDR
• pixel size: 3.0 µm x 3.0 µm
• image area: 5808 µm x 4656 µm
---|---
Product Features
• resolution: 1920 x 1536 and cropped sizes
• high dynamic range
• high sensitivity
• dual conversion gain
• ASIL-B safety compliant
• image signal processing functions:
– AEC/AGC/AWB
– lens correction
– defective pixel correction
– HDR combination
– tone mapping
– automatic black level correction
• supported output formats:
– YUV
– RGB888
– RAW| • supports LED flickering mitigation (LFM) function
• supports aiming function
• SPI master for overlay and
loading settings
• distortion correction
• 50/60 Hz flicker cancellation
• SCCB for register access
• programmable GPIOs
• high speed serial data transfer with MIPI CSI-2
• external frame synchronization capability
• embedded temperature sensor
• one-time programmable (OTP) memory
---|---
Functional Block Diagram
4275 Burton Drive
Santa Clara, CA 95054
USA| Tel: + 1 408 567 3000
Fax: + 1 408 567 3001
www.ovt.com
---|---
OMNIVISION reserves the right to make changes to their products or to discontinue any product or service without further notice. OMNIVISION and the OMNIVISION logo are trademarks or registered trademarks of OmniVision Technologies, Inc. PureCel is a registered trademark of OmniVision Technologies, Inc. a-CSP and Deep Well are trademarks of OmniVision Technologies, Inc. All other trademarks are the property of their respective owners.
https://www.ovt.com/products/ox03j10
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>