Lindab Pascal Operate User Guide
- June 9, 2024
- Lindab
Table of Contents
Lindab Pascal Operate
Getting started guide
Regula Master HTML
Regula Combi version 1.5
User Guide
Pascal Operate
Lindab Pascal Operate
Get started with Pascal Operator
Items you need:
- PC with HTML5 web browser, like Chrome, Firefox, Edge or Safari.
- Router with DHCP server / or providing static IP adresses.
- Ethernet cables
Connect your router
Connect your router to PC and to Regula Master.
Regula Master will get a IP-address, which is visible in the top main display
menu by pressing right arrow. If you connect to an internal network you just
connect to the network (via Wi-Fi or cable).
In many cases a static IP address is needed from the local network. To get
this the local IT-support must be involved.
The static IP is set manually on the RM with push buttoms.
Menu: Configuration-> Communication-> TCP/IP-> Set static IP
-
NOTE ! All Regula Master commes with same PLA:ELA from factory. Change these before starting setup. It is possible to do in three ways.
- From display. In the top main menu click right arrow twice and change. Do this on all RM.
- From IP login to all Regula Masters, in settings.
- With Application loader.
Example:
Global RM: 123:123
Local RM 1: 1:1
Local RM 2: 2:2
Open web browser
Open web browser and type in the IP-address of the Regula Master.
Login page
Login page for Lindab Pascal Operate will appear as a viewer access with:
User/Passwords:
End user: lindab
Operator: operate
Service: pascal
Access from the user logins:
End user:| Overview, setup values and indoor climate values in all zones /
rooms.
Access to Setup-Wizard.
---|---
Operator:| Also setup of standard values.
Service:| Also advanced settings, full parrameterlist, fan settings and more.
Admin:| Only Lindab Technician.
Setup Wizard
At first login to the Global RM it enter the Setup Wizard.
This is a walk-through setup guide.
Lindab Pascal Operate
Menus and features in Pascal Operate
Overview menu
Overview menu gives access to view the full system from Global RM to Local RM
and down to all Supply and Extract Controllers and Flow & Temperature Units.
At the Overview Top is showed System Values according to the sensors in the
system.
Access lower levels by clicking the left menu or the icons in the string-
structure.
Settings menu – Global RM
Go through the menus to connect and name (ID) the Global RM to Locals.
Settings menu – Local RMs
Go through the menus to activate the Supply, Extract and Flow & Temperature
units in the system.
Have the PLA:ELA addresses ready and name all units (ID).
NOTE ! When activate Extract remember to set type. ERC is with Regula
Combi, EUC is FTCU connected direct to LRM.
Settings menu – Supply
Setup all Supply units.
Settings menu – Extract
Apply the type/size and quantity of the flow regulators.
NOTE ! EUC equals one FTCU.
Settings menu – Flow & Temperature
Apply the size of the Flow & Temperature measuring unit (FTMU).
NOTE ! Supply / Extract is for future use.
Most of us spend the majority of our time indoors. Indoor climate is crucial
to how we feel, how productive we are and if we stay healthy.
We at Lindab have therefore made it our most important objective to contribute
to an indoor climate that improves people’s lives. We do this by developing
energy-efficient ventilation solutions and durable building products. We also
aim to contribute to a better climate for our planet by working in a way that
is sustainable for both people and the environment.
Lindab | For a better climate
Lindab reserves the right to make changes without prior notice
2020-09-07
www.lindab.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>