YINYOO KBEAR KS2 in-Ear Monitor,Musicians Headphones, Yinyoo HiFi Over Ear Earbud Headset User Guide
- June 4, 2024
- YINYOO
Table of Contents
YINYOO KBEAR KS2 in-Ear Monitor,Musicians Headphones, Yinyoo HiFi Over
Ear Earbud Headset
Specifications
- BRAND : YINYOO
- MODEL NUMBER : Ks2
- COLOR : Green
- FORM FACTOR : In Ear
- DIAPHRAGM: 10mm Composite Diaphragm
- HEADPHONE TYPE: In-ear headphones
- HEADPHONE OUTPUT SOURCE: HiFi
- SENSITIVITY: 106dB ±3dB
- CELL IMPEDANCE: 16Ω
- FREQUENCY RESPONSE RANGE: 20-20kHz
- PIN TYPE: 0.78mm
- PLUG DIAMETER: 3.5mm
- PLUG TYPE: L curved
- LINE LENGTH: 120 ± 5 cm
- WIRED OR WIRELESS HEADSET: Wired headset
- COLOR: Black / Green
- VOICE PRINCIPLE: 1 dynamic driver + 1 Balanced Armature\
- SUITABLE STYLE TYPE MUSIC: Classical, rock, pop and so on
- DRIVERS PER SIDE: 1BA 1DD
- CAVITY MATERIAL: resin
- PRODUCT DIMENSIONS: 4.72 x 3.15 x 1.18 inches
- ITEM WEIGHT: 3.53 ounces
Introduction
The KBEAR KS2’s cabinet cavity is built of imported high-density PC material, which effectively reduces diffuse sound wave reflection inside the cavity. The internal cavity acoustic structure has been optimized, resulting in a warmer, more endearing sound that faithfully recreates a gentle, mellow audio performance. Translucent resin substance, brilliant streamer, loaded with style and innovation! It has large sound field, stunning sound quality, transparent and mellow midrange performance, and powerful low frequency response.
The sound is more mellow, the mid-frequency density is balanced, and the high- frequency is transparent and smooth, revealing richer instrument details and delicate music that was performed. The mid-to-high frequency uses specialized moving iron units, which can effectively improve the vocal resolution. The characteristics of the mid-low frequency are relaxed and natural with strong infectious power. The mid-high frequency exhibits good ductility, transient, and resolution. The KBEAR KS2 has a combination of BA DD through electronic frequency division processing, allowing each unit to execute to the fullest extent possible while yet achieving precise and delicate performance. Bring charm and vitality to the sound effects by faithfully reproducing the original audio.
4 strands of 6N OFC high-quality wires not only successfully enhance transparency, separation, and sound field, resulting in crystal-clear sound at the bottom and more beautiful vocals and musical instruments, but they also lessen signal transmission loss. The playability is enhanced by the use of interchangeable 2PIN wires. and a limit slot is added to increase the headset’s lifespan.
WHAT’S IN THE BOX
- 1 pair headset
- 3 pairs of silicone ear tips
- 1* earphones cable
- a user manual
HOW TO CLEAN
Start by cleaning the IEMs’ exteriors with a little rubbing alcohol and a soft towel or microfiber cloth. Any wax or grime on the shell will be broken up and cleaned by the alcohol, which will also assist the IEM’s excess moisture evaporate. Remove the cable from time to time and clean the sockets.
HOW IT WORKS
They function the opposite way as a wireless microphone system in this configuration. You would input the identical feed that you would provide to your stage monitors into the wireless monitor transmitter from your mixer. The wireless receiver belt pack, into which your headphones are plugged, receives the signal from the transmitter and sends it to it.
HOW TO CHANGE FILTER
- Please use the tweezers to gently squeeze one side of the original filter until it cocks up.
- Remove the initial filter.
- Pick up a fresh filter with tweezers.
- In edges-justified, insert the new filter.
- Use the tweezers to gently press the edge until the filter surface is flat. The installation is then complete.
HOW AUDIO FILTERS WORK
Electronic circuits called audio filters are used to either amplify or attenuate components of a certain frequency range. This enhances the tone of the output audio and assists in removing unwanted noise from the audio source. In telecommunications and audio electronics, filters are crucial.
Frequently Asked Questions
The Kbear KS2 is wireless, right?
This gives you more control over music selection and audio options and makes it possible to use the KBEAR KS2 earphones wirelessly.
What makes in-ear monitors unique?
In-ear monitors can work with just one armature driver, but some of the best models can hold up to 18 balanced armature drivers for a quicker response time, a wider dynamic range, and a more nuanced sound.
How is Kbear KS2?
It appears that KBEAR is continuing its hot streak with the introduction of the KS2. The detachable cable, soft acrylic shells, and energetic, detailed music with a good soundstage are all included for just over $20. This choice is a no-brainer if you’re wanting to get a set of inexpensive headphones.
How long is IEM good for?
According to usage and care, they should typically last you between three and five years. Before using, please read the Empire User Guide. You may use this information to better understand how to use and maintain your Empire in-ear monitors so you can enjoy them for a long time.
With in-ear monitors, can you mix?
Many issues can be resolved by using in-ear monitors when mixing, producing, and editing. Whole albums can be mixed on in-ear monitors thanks to the high quality of today’s in-ear monitors.
Do in-ear headphones safeguard hearing?
In-ear monitors give only the sounds you need to hear while simultaneously shielding your ears from background noise. You are in control of adjusting the volume to a secure level. It’s unquestionably the healthier choice.
In-ear headphones are noise-canceling, right?
not only because of the music, but also due to the sounds made by the crowd as they move about the space. Those performers who have used stage monitors in the past are accustomed to hearing that input from the audience. However, these sounds are eliminated by noise cancellation while using in-ear monitors.
IEM can it be used for gaming?
I can’t think of a greater application for IEMs than gaming, save from music. To complement even the most frantic games of Fortnite or Plants vs. Zombies, strong highs, punchy mids, and deep bass are used. Let there be noise.
The purpose of in-ear monitors for musicians?
Excellent hearing protection is crucial for musicians to safeguard their way of life. IEMs provide earplug-like external protection since they fit inside the ear canal. These shield performers from exposure to raucous band noises and cries from the audience.
Are IEMs worth it?
IEMs can be a wonderful investment if you have an interest in audio and are willing to try new things at the risk of giving up some convenience. They often come in all shapes, sizes, and configurations, sound better in terms of detail, last longer, and fit more comfortably.
Video
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>