YAHBOOM Sensor Kit For Microbit User Manual
- June 9, 2024
- YAHBOOM
Table of Contents
YAHBOOM Sensor Kit For Microbit
OVERVIEW
- Please read this manual carefully before use
- Our company reserves the right of interpret for this manual
- Product appearance, please prevail in kind
- Please keep the manual properly after reading
https://www.yahboom.com/study/WOM-Sensor-Kit-microbit
Tutorial link: http://www.yahboom.net/study/WOM-Sensor-Kit-microbit
Packing list
- RGB module
- Button module
- Rocker module
- Photosensitive module
- Temperature and humidity module
- Infrared module
- Human body infrared sensor module
- Color recognition module
- Ultrasonic module
- Digital tube module
- Building block servo*2
- PH2.0 cable 10 USB data cable 1
- Microbit sensor expansion board
- Micro:bit (optional)
- Block package A
- Block package B
Module introduction
Building block ruler
Building models introduction
First Trial
Tutorial link:
www.yahboom.net/study/WOM-Sensor-Kit-microbot
- Enter the above link, and click [Assembly and servo calibration]—[servo calibration]. Download the hex file we provided, and complete the calibration of the servo.
- Assemble the building blocks according to our steps.
- Connect the sensor module and expansion board according to the wiring diagram.
- View a single course and download the hex file we provided to the Micro: bit board through the USB data cable.
- View experimental phenomena.
Servo direction display diagram
Tips:
- When using the related gameplay of the servo, you need to use a dual-head micro USB data cable to connect to the computer, board and the expansion board, otherwise only the board will not be able to drive the servo, and only the expansion board will not be able to download the program.
- Before assembling the building blocks, you need to download the servo calibration code to initialize the servo to a fixed angle. If the servo is not calibrated before use, it is easy to jam the servo during use, causing a stall and burning the servo.
- When assembling, pay attention to the installation direction of the servo. The direction of the servo can be determined through the line of the servo. Otherwise, the angle of driving the servo will be reversed after running the program. In severe cases, the servo will be blocked or even stuck, and the servo will be damaged.
Safety instructions
- This product contains small accessories, please prohibit the use of children under three years old, the use of this product is 8 years old and above, and children should be used under adult supervision.
- Do not touch the servo shaft and related structures when it’s rotating.
- Do not touch the pin headers on the expansion board with your hands.
- Do not reverse the positive and negative poles of the power supply of this product.
- It is strictly forbidden to modify and weld the circuit of this product by yourself.
- Do not soak or rinse the product with liquid.
- Do not place this product in a strong magnetic field, and keep it away from magnetic equipment.
- Do not use this product in high temperature and dust environments, and keep this product away from fire.
- Do not put the accessories contained in this product in your mouth, and be careful to prevent children from swallowing small parts in the kit.
- Do not hit, throw, or needle the product, and please avoid dropping, squeezing, or bending the product.
- Do not expose this product to a corrosive environment, and it is strictly forbidden to use other chemical liquids to clean this product.
- Please strictly follow the experimental wiring to prevent damage to the product.
Disclaimer
- Unauthorized maintenance, misuse, collision, negligence, abuse, liquid ingress, accident, alteration, incorrect use of non-product accessories, or tearing, altering the logo;
- Damage caused by force majeure；
- Performance failure of this product due to human factors.
Solemnly reiterate
Please read this specification carefully, especially the parameters,
precautions, etc., to understand the use of the product and the scope of
application. If the product is used incorrectly, the circuit is connected
incorrectly, or the input power source, load function parameters, and the
performance parameters marked in the product specifications do not match, it
is improper use. The product, load, and peripheral links are damaged due to
improper use. The company does not bear related responsibilities.
Tutorial link
www.yahboom.net/study/WOM-Sensor-Kit-microbot
Technical Support
WhatsApp: +86 18682378128
Email: support@yahboom.com
Shenzhen Yahboom Technology Co., Ltd.
Website: www.yahboom.net
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>