SYNCCO 2.4G Wireless Lavalier Microphone System User Manual
- June 8, 2024
- SYNCCO
Table of Contents
2.4G Wireless Lavalier Microphone System
User Manual 2.4G Wireless Lavalier Microphone System
2.4G Wireless Lavalier Microphone System
Dear customer,thank you for choosing our product 2.4G Wireless Lavalier
Microphone System please read the instructions carefully before connecting,
operating, or debugging this product, and keep this manual for future
reference.
Special Note
- Please fully charge the battery when using this product for the first time
- Please use the product within 70 meters of barrier-free use. It is normal that there will be freezes, no sound, etc. when used over a distance or with obstacles.
- When the receiver is connected to an Apple device, please use a 3.5mm to Lighting audio conversion cable to switch. When the receiver is connected to the Type-C interface device, please use the 3.5mm to Type-C audio conversion cable.
Product Introductions
This product is designed for the high-end professional film and television live broadcast industry. It is configured with 2 transmitters and 1 receiver. It can support two audio transmissions at the same time, and it can also support 1 audio transmission; the product adopts the industry-leading wireless transmission scheme, 2.4G frequency band transmission, It has the advantages of high reliability, ultra-low power consumption, long battery life, and no delay; it is widely used in media interviews, live broadcasts and other fields.
Product Features
- Dual-channel synchronous transmission without delay
- Built-in high-performance large-capacity polymer lithium battery, safe and reliable
- Using ultra-low power consumption main control chip, which can work continuously for 7 hours
- Ultra-low delay transmission to ensure synchronization of audio and video
- Support noise reduction function
- The receiver display screen design is convenient for status checking and function control
- Support MONO and Stereo
- Support one-key mute, cut off non-essential audio recording at any time
- Support volume adjustment
- Support external microphone
Product Specification
- Longest transmission distance…………………………………..70m
- Built-in battery…………………………………………………………….Lithium battery
- Battery Capacity…………………………………………………………………250mA/H
- Working time……………………………………………………………………About 7hrs
- Charging power………………………………………………………………..5V/200mA
- RF frequency……………………………………………………………………..2400Mhz
- Transmit power……………………………………………………………………….14DB
- Audio gain………………………………………………………………………….0-4Level
- Signal-to-noise ratio…………………………………………………………………67DB
- Frequency Range……………………………………………………20HZ—14.5KHZ
- Noise reduction grade……………………………………………..0–75Hz–150Hz
- Microphone……………………………………………..Capacitive Omnidirectional
- Receiving sensitivity…………………………………………………………………….-95DB
- Maximum output level………………………………………………………….1.7Vp-p
- Output impedance……………………………………..≈47Ω （32ΩUnder load）
- Working temperature range…………………………………………(-40℃ – +50℃)
- Working environment temperature range………90% RH(No condensation)
- Product size……………………………………………………………46.7x47x19mm
- Material……………………………………………………………………………………ABS
- Color………………..……….….……………………………………………….…Black
- Transmitter weight…………………………………………………………………..34.5g
- Receiver weight………………………………………………………………………32.5g
Function Introduction
Receiver
Audio output connection instructions:
- Connect to DSLR camera、Digital camera etc devices via 3.5mm audio cable.
- Connect to Apple Iphone、Ipad etc devices via 3.5mm to Lighting audio cable.
- Connect to Type-C interface Android smartphone、Ipad etc devices via 3.5mm to Type-C audio cable.
NOTE:
- The battery indicator icon of the transmitter only lights up after the connection is successful, and the gray state is displayed when it is not connected,The “ ” sign in the battery display icon is only displayed in the charging state .
- The volume indicator bar of the transmitter only lights up after the connection is successful, and there is no such icon when the microphone is not connected or recording is forbidden.
- The receiver’s battery indicator icon lights up after power on.The ” ” sign in the battery display icon is only displayed in the charging state .The “RX” symbol flashes when entering the pairing mode.
- The volume gain icon is adjusted by the button on the receiver.
- Mono and stereo can be switched by pressing the button on the receiver.
Transmitter
Matching methods:
- When pairing, please keep the distance between the receiver and transmitter about one meter, and turn on the receiver and transmitter normally.
- Long press the button on the receiver for 4 seconds to enter the pairing mode, at this time the “R” symbol flashes.
- Observe the connection indicator of the transmitter and wait for 30 seconds, until the connection indicator remains on, the connection is successful.
Equipment connection and use note:
- When using video camera, SLR camera and other equipment, it can be connected and used through 3.5mm audio conversion cable.
- When using Apple mobile phones, Ipads and other devices, please use the 3.5mm to Lighting audio conversion cable to connect and use.
- When using Type-C interface Android phones, Ipads and other devices, please connect and use through 3.5mm to Type-C audio conversion cable.
Package Contents
Receiver………………………….…1pcs
Transmitter…………………………2pcs
User Manual…………………..……1pcs
USB 1 to 3 charge cable……………………1pcs
3.5mm microphone cable……………………2pcs
External microphone socket…………………….2pcs
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>