GLAWNING POD Pitching Instructions
- June 8, 2024
- GLAWNING
Table of Contents
POD Pitching
Instructions
POD Pitching
STEP 1 – Grab a beer (optional), unpack and check you’ve got all your bits! You should have:
- a set of 12 pegs
- a small pole
- a small guy rope
- a POD with sewn in groundsheet
STEP 2 – Lay the
POD in the general position that you want it (if you’re pitching with a
glanopy then remove the A-frame at this stage, making sure that the rest of
the glanopy is supported so it doesn’t fall over)
Pop the POD eyelet over the top of the A-frame
STEP 3 – Peg out the POD so that it remains symetrical with the A-frame
position and maintains the correct shape.
If using with the glanopy, the pod should go underneath the glanopy, as shown
above, so that the glanopy can overlap the gap. It also helps to keep the
main glanopy guy rope in place. STEP 4 – Pop the pole in at the base of
the POD as shown above. This gives the tent the correct structure and allows
for ventilation.
STEP 5 – TOP
HACK: If you want to ensure you close the gap between the glanopy and the POD
as much as possible you can clip 22mm plumbers pipe clips over the canvas and
A-frame poles, as shown above.
STEP 6 – Admire your handiwork and grab another beer (unless
you’re still finishing your first, of course).
If it doesn’t look like the picture above, go back to step 1. If it still
doesn’t, stop drinking beer and give us a call…
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>