AEG FDS 140 Orbital Sander Instruction Manual
- June 8, 2024
- AEG
Table of Contents
FDS 140 Orbital Sander
Instruction Manual
FDS 140 Orbital Sander
Please read and save these instructions!
| 
---|---
| 
| 
| 
TECHNICAL DATA
TECHNICAL DATA
Oscillating sander| FDS 140
---|---
| |
Rated input| 260 W|
No-load speed| 14000 min-1|
Orbital travel diameter| 1,6 mm|
Dimensions of grinding plate| 110 x 105 mm| 110/110 mm
Weight according EPTA-Procedure 01/2014| 1,5 kg| 1,6 kg
Noise information
Measured values determined according to EN 62841. Typically, the A-weighted
noise levels of the tool are:
Sound pressure level (Uncertainty K=3dB(A)) Sound power level (Uncertainty
K=3dB(A))
Wear ear protectors!| 76,5 dB(A)
87,5 dB(A)| 82,0 dB(A)
93,0 dB(A)
Vibration information
Vibration total values (triaxial vector sum) determined according to EN 62841
Vibration emission value a, 14,8 m/s’
Uncertainty K= 1,5 m/s2| 4,8 m/s2
1,5 m/s2| 10,0 m/s2
1,5 m/s2
WARNING!
The vibration emission level given in this information sheet has been measured
in accordance with a standardised test given in EN 62841 and may be used to
compare one tool with another. It may be used for a preliminary assessment of
exposure.
The declared vibration emission level represents the main applications of the
tool. However if the tool is used for different applications, with different
accessories or poorly maintained, the vibration emission may differ. This may
significantly increase the exposure level over the total working period.
An estimation of the level of exposure to vibration should also take into
account the times when the tool is switched off or when it is running but not
actually doing the job. This may significantly reduce the exposure level over
the total working period.
Identify additional safety measures to protect the operator from the effects
of vibration such as: maintain the tool and the accessories, keep the hands
warm, organisation of work patterns.
WARNING Read all safety warnings, instructions, illustrations and
specifications provided with this power tool. Failure to follow all
instructions listed below may result in electric shock, fire and/or serious
injury.
Save all warnings and instructions for future reference.
SANDER SAFETY WARNINGS
Wear ear protectors. Exposure to noise can cause hearing loss.
Appliances used at many different locations including wet room and open air
must be connected via a residual current device (FI, RCD, PRCD) of 30mA or
less.
Use protective equipment. Always wear safety glasses when working with the
machine. The use of protective clothing is recommended, such as dust mask,
protective gloves, sturdy non-slip footwear, helmet and ear defenders.
The dust produced when using this tool may be harmful to health. Do not inhale
the dust. Use a dust absorption system and wear a suitable dust protection
mask. Remove deposited dust thoroughly,e.g. with a vacuum cleaner.
Do not machine any materials that present a danger to health (e.g. asbestos).
This machine is suitable only for dry sanding.
MAINS CONNECTION
Connect only to single-phase AC system voltage as indicated on the rating
plate. It is also possible to connect to sockets without an earthing contact
as the design conforms to safety class II.
Keep mains lead clear from working range of the machine. Always lead the cable
away behind you.
Before use check machine, cable, and plug for any damages or material fatigue.
Repairs should only be carried out by authorised Service Agents.
Do not let any metal parts enter the airing slots – danger of short circuit!
Always disconnect the plug from the socket before carrying out any work on the
machine.
Only plug-in when machine is switched off.
SPECIFIED CONDITIONS OF USE
The oscillating sander can be used for sanding wood, plastics and metal.
MAINTENANCE
The ventilation slots of the machine must be kept clear at all times.
If the replacement of the supply cord is necessary, this has to be done by the
manufacturer or his agent in order to avoid a safety hazard.
Use only AEG accessories and spare parts. Should components need to be
replaced which have not been described, please contact one of our AEG service
agents (see our list of guarantee/service addresses).
If needed, an exploded view of the tool can be ordered. Please state the
Article No. as well as the machine type printed on the label and order the
drawing at your local service agents or directly at: Techtronic Industries
GmbH, Max-Eyth-Straße 10, 71364 Winnenden, Germany.
EC-DECLARATION OF CONFORMITY
We declare under our sole responsibility that the product described under
“Technical Data” fulfills all the relevant provisions of the directives
2011/65/EU (RoHS)
2006/42/EC
2014/30/EU
and the following harmonized standards have been used.
EN 62841-1:2015
EN 62841-2-4:2014
EN IEC 55014-1:2021
EN IEC 55014-2:2021
EN IEC 61000-3-2:2019+A1:2021
EN 61000-3-3:2013+A1:2019
EN IEC 63000:2018
**** Winnenden, 2021-10-29
Alexander Krug / Managing Director
Authorized to compile the technical file
Techtronic Industries GmbH
Max-Eyth-Straße 10, 71364 Winnenden, Germany
SYMBOLS
| CAUTION! WARNING! DANGER!
---|---
| Please read the instructions carefully before starting the machine.
| Always disconnect the plug from the socket before carrying out any work on
the machine.
| Do not use force.
| Accessory – Not included in standard equipment, available as an accessory.
**| Do not dispose of electric tools together with household waste
material. Electric tools and electronic equipment that have reached the end of
their life must be collected separately and returned to an environmentally
compatible recycling facility. Check with your local authority or retailer for
recycling advice and collection point.
| Class II tool. Tool in which protection against electric shock does not
rely on basic insulation only, but in which additional safety precautions,
such as double insulation orreinforced insulation, are provided. There being
no provision for protective earthing or reliance upon installation conditions.
V| Voltage
n0| No-load speed
| AC Current
**| European Conformity Mark
| Ukraine Conformity Mark
| EurAsian Conformity Mark
www.aeg‑powertools.eu
Techtronic Industries GmbH
Max‑Eyth‑Straße 10
71364 Winnenden
Germany
(10.20)
4931 2890 74
11.21
4931 4251 03
Techtronic Industries (UK) Ltd
Fieldhouse Lane
Marlow Bucks SL7 1HZ
UK
AEG is a registered trademark used under license from AB Electrolux (publ).