CW Morse 24 Series PCB Straight Key Instruction Manual

June 8, 2024
CW Morse

CW-Morse-24-Series-PCB-Straight-Key-LOGO

CW Morse 24 Series PCB Straight Key

CW-Morse-24-Series-PCB-Straight-Key-PRODUCT-IMAGE

24 Series Straight Key

CW-Morse-24-Series-PCB-Straight-Key-01

CW-Morse-24-Series-PCB-Straight-Key-02

CW Morse 24 Series
PCB Straight Key

Dimensions
All Rights Reserved 2022 CW Morse LLC
cwmorse.us

CW-Morse-24-Series-PCB-Straight-Key-03

PCB STRAIGHT KEY SIGNAL DIAGRAM

(Using A Standard 3.5mm TRS Stereo AUX Cable)

CW-Morse-24-Series-PCB-Straight-Key-04

JP1 NOTE:
When using a standard 3.5mm Stereo Aux Cable, some kiers, oscillators and software require that the RING and SLEEVE to be umpired. (This allows for a straight key (mono) to be used with a stereo cable.)

Clean the Key using a dry paintbrush or compressed air.

Use a small strip of 220 grit sandpaper or Paper Nail File.
Close Contacts gently and Pull Sandpaper Through
Flip Paper Over And Repeat

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals