Shenzhen Mokoc Technology E16 Line Friend TWS Bluetooth Earphones User Manual

Shenzhen Mokoc Technology E16 Line Friend TWS Bluetooth Earphones

Product Overview

What’s in the Box

• LFT25 Earbuds x 2
• LFT25+ Charging Case x 1
• USB-C Cable x1
• User Manual x1
• Card needle x1
• Non-slip mats x1

How to Pair

1. Open the charging box, the left and right earphones will automatically form a TWS team, After the team is successfully formed, the white lights on both ears will lash slowly.
2. SelectLFT25 ” under the Bluetooth menu on your device.
3. Congratulations, your LFT25 earphones have been successfully connected. After the connection is successful, the indicator light will be off. You can take it out and use it alone, or you can use two earphones together to enjoy music.
4. When you use it again, you only need to open the charging box, and the headset can automatically reconnect to the last connected device. After the connection is successful, the left and right earphone lights will turn off.
5. Connect to a New Device When you want to connect to a new device, disconnect this connection, and the earbuds will turn to pair mode.

Touch Control

Power on

• The earphones are taken out of the charging box and earphones are automatically turned on.
• Press and hold the touch button for 3 seconds, the earphone is turned on manually.

Power off

• Put the earphone into the charging box, and the earphone will automatically shut down.
• Press and hold the touch button for 8 seconds, the headset will be manually turned off.

Charge the earphone

Put the earphone back into the charging box to charge, the white light is always on, and the light is off when fully charged.

Low battery reminder

When the earphone is low in battery, the earphone will play a low-battery tone to remind you to charge.

Factory reset

When the two earphones fail to team up or connect via Bluetooth, try a factory reset as explained below.

1. When a single earphone is not connected, press the touch key 5 times to perform clearing and automatically shut down.
2. Repeat the above steps for the other earphone.
3. After clearing, the dual earphones restart automatically to form a team. After the team is successfully formed, the white light of the dual earphones flashes slowly.

Charging the Charging Case

Use the USB-C Cable to charge the charging case.
When the charging box is charging. the indicator light of the charging box is always on, and it is off when fully charged.

Turn on the earphone box

In shutdown state, press and hold the multi-function button for 3 seconds to turn it on.

Turn off the earphone box

In the power-on state, press and hold the multi-function button for 3 seconds to power off.(lf you don’t let go for 5 seconds, Clearing the pairing record will be performed.)

Earphone box pairing mode

It will automatically enter pairing mode after powering on.

Earphone box connection equipment

Device search “LFT25-B” pairing name and click connect.

The earphone box connection timed out

• Pairing mode: The earphone box will automatically shut down if it is not connected within 3 minutes after it enters the pairing mode.
• Over-distance connection: The earphone box will automatically shut down if it does not return to the range after 3 minutes beyond the connection range.
• Disconnect: The earphone box will automatically shut down if the device is not connected after 3 minutes of disconnection. link back
• Power off state: After the earphone is turned on, it will reconnect to the last connected device.
• Over-distance status: The earphone box returns to the last connected device after it returns to the connection range.

Earphone box button control

Switch between headphones and speakers

1. Headphone Bluetooth LFT25-E and speaker Bluetooth LFT25-B must be connected to the same mobile phone.
2. When the speaker is in use, the Bluetooth will automatically connect back after taking out the headphones, and the sound of the speaker will be switched to the headphones.
3. Click the speaker button, and the headphone sound can be switched to the speaker.
4. Double-click the earphone touch button, and the sound of the speaker can be switched to the earphone.

Clear pairing record

Press and hold for about 3 seconds to hear a “dong” sound, don’t let go, until you press and hold for about 5 seconds, you hear the “pairing” prompt to disconnect the Bluetooth and clear the pairing record.

Earphone box low battery reminder

When connected, “Battery Low” is reminded every minute.

FAQ

• How to switch Mono Mode to Dual Mode.
  • When you just only use the right earbud, take out the left earbud from the charging case, the music will come out from the left and right earbuds at the same time
  • When yOu just only use the left earbud, take out the right earbud from the charging case, the music will come out from the left and right earbuds at the same time.
• How to switch Dual Mode to Mono Mode.
  • When you put your right earbud into the charging case, the left earbud
  • Will continue playing music.
  • When you put your left earbud into the charging case, the right earbud will continue playing music.
• The earbuds cannot reconnect to my device automatically. lf your earbuds are connected to several devices before, they will reconnect automatically with the recently connected device,
  • Make sure the Bluetooth of the mobile phone is turned on, close the cover again, and turn on the headset again.
  • If the left and right ear lights are off after the headset is turned on, it means that the headset is connected to other mobile phones, turn off the Bluetooth of the mobile phone that has been connected to the headset, the white lights on both ears flash slowly, the headset automatically enters the pairing mode, and then use the current mobile phone to search for connection.
  • Let the earphone reset to factory settings, and then use the current phone to search for the connection again.
• When the left and right headphones cannot be connected, put the left and right headphones into the charging box, open the charging box, and the lett and right headphones automatically forma TWS team. After the left and right headphones are interconnected successfully, the binaural white light flashes slowly, and the headphones enter the pairing mode. If the above operations are invalid, please try to restore the factory settings.
• No sound from left/right earbud.
  • Please put your earbuds into the charging case, and then take out them again. If still not solve this problem, please carry out restoring the factory settings page /), and then put your earbuds into the charging case and then take out them again.
• Can’t turn on my earbuds
  • Put the earbuds into the charging case again, and make sure that the earbuds is in the compartment and there is no shaking.
  • Close the cover, then charge the charging case. After flushing for a period of time, open the cover again and try to activate the headset.

FCC Compliance Statement

FCC and IC Statement

This device complies with part 15 of the FCC Rules and Industry Canada license-exempt RSS standards). Operation is subject to the following two conditions:
(1)This device may not cause harmful interference, and(2}this device must accept any interference received, including interference that may cause undesired operation, CAN ICES-3(B),

FCC/IC Radiation Exposure Statement

This equipment complies with FCCAIC RSS-102 radiation exposure limits set forth for an uncontrolled environment.
The device has been evaluated to meet the general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Federal Communication Commission Interference Statement

This equipment has been tested and found to comply with limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interterence in a residential installation. This equipment generates, usEs and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interterence to radio communications. However, there is no guarantee that interference will not occur in a particular installation. li this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interterence by one or more of the following measures:

• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Caution

Any Changes or modifications not expressly approved by the party set forth for an uncontrolled environment. Responsible for compliance could void the user’s authority to operate the equipment.

Warranty Period

12 months after the next day of receiving this item. Free exchange service will not be accessed under the following circumstances

1. Damages caused unauthorized disassembly.
2. Defects or physical damages caused by leaking or dropping off.
3. Damages by act of god.Supposing your item is within any damage or defects except for the above circumstances, please return it to us or your distributor for free repairing

Name and content of harmful substances in products

Documents / Resources

| Shenzhen Mokoc Technology E16 Line Friend TWS Bluetooth Earphones [pdf] User Manual
LFT25B, 2A764-LFT25B, 2A764LFT25B, E16 Line Friend TWS Bluetooth Earphones, Line Friend TWS Bluetooth Earphones
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>