AKAI ABTS-45 Portable Speaker User Manual

AKAI ABTS-45 Portable Speaker

Features

1. Portable Bluetooth V5.0 Speaker
2. With Bluetooth, wireless stream music from any Bluetooth-enabled devices such as your mobile phone, notebook, iPhone or iPad
3. Bluetooth operating range 10 meters
4. TWS function, achieve true wireless Bluetooth playing with double enhanced stereosound5. RGB Lighting
5. USB support
6. FM radio- high-quality radio with automatic channel search and storage of up to 30 channels. 8. Line-in function, suitable for PC, TV or other audio devices
7. Built-in lithium rechargeable battery 3.7V 3000mAh
8. Carry belt, easy to take out
9. Microphone jack, for Karaoke function (the microphone is not included)

Recording function

Recording using a wired microphone (not included):
Connect a storage device (USB/TF card) and short-press RECORD key to start recording. During recording, tune the “-ECHO+” knob to the minimum. It is noticeable that the microphone should be located in a proper distance away from the speaker to prevent any howl-round or noise. Note: This product shows recording time on the display.

The bluetooth pairing operation and related parameters

1. Power: switch the power ON, press the key “MODE” to enter in Bluetooth mode, and the display screen will show “BLUE”.

2. Switch on the Bluetooth function on mobile phone and search for available devices, until the mobile phone shows “ABTS-45”. The connection doesn`t need any password , if password is requested, please type ”0000” to go on pairing. After success pairing, the speaker will send out a voice prompt. That means the pairing between mobile phone and Bluetooth speaker was
   succesfully made.

3. Now you may play the music from your phone.

TWS function

1. Turn on two identical speakers you want to pair, both under BT mode.
2. Long-press the TWS button until speaker display “BLUE” stop flashing, now both speakers paired successfully.
3. Establish Bluetooth connection with your mobile phone to play music by the two paired speakers to create more powerful surround sound effect.
4. When you want to exit the TWS mode, short-press the “TWS” button again.

Functional Operations and Features

1. LED Screen.
2. Master Volume: In USB/TF Card/AUX in/FM/Bluetooth mode, use it to regulate volume output from the speaker.
3. TF Port: Reads audio files in MP3 format from TF card (max capacity 32GB, FAT32).
4. USB Port: Reads audio files in MP3 format in USB storage (max capacity 32GB, FAT32).
5. : In the play status of USB/TF Card/Bluetooth, short press it to select the previous channel.In FM mode status, short press it to select the previous channel after a full station search has been executed.
6. /SCAN: In USB/TF card/Bluetooth reading status, short-press it to play/pause, or long-press it to select one of two playback modes: All-play all tracks in sequence; ONE – repeat onetrack. InFM mode, long press it to execute a full search (it is recommended to execute at least one full search before using radio function. All saved stations will be available even after power-off. InAUX input / FM radio status, short press it to toggle between mute and normal volume.
7. : In USB/TF card/Bluetooth mode, short press it to go to the next song. In FMmode, shortpress it to select the next channel after a full station search has been executed.
8. MODE/SHIFT: Short press it to toggle between USB/TF/AUX IN/Bluetooth and FMmodes.Long press it to toggle between recording folder and MP3 folder.
9. ECHO-: Reverberation volume down control button.
10. ECHO+: Reverberation volume increment control button.
11. REC/DEL: Short press it to enable recording. During recording, reverberation should be tuned to the minimum. Long press it to delete a recorded file. Recording in Microphone mode is available.
12. : Short press it for light mode.
13. Microphone volume knob.
14. Power switch.
15. DC 5V recharging port.
16. Recharging indicator light: When charger is connected, the red light turns on. Whenthedeviceis fully charged, the blue light turns on.
17. AUX IN: External sound source input port (plug-and-play).
18. Microphone input jack. (the microphone is not included)
19. TWS: Turn on two identical speakers you want to pair, both under BT mode. Short-press the TWS button, speaker will make a tone and start to pair, a tone will be audible again. Make Bluetooth connection with your mobile phone to play music by the two paired speakers to create more powerful surround sound effect.
20. EQ: In USB/TF/AUX/Bluetooth mode short press it to select an environment mode (fromNOR,POP, ROCK, JAZZ, CLA, CVB).

Technical specifications

1. Bluetooth version -V5.0
2. Bluetooth channel emission power -0.5Dbm
3. FM Radio frequency -87.5-108MHz
4. SW Radio frequency -100Hz-20KHz
5. AUX in input – 3.5mm
6. USB slot -playing function
7. Power Source -5V
8. Power Consumption -16W
9. Impedance -2Ω
10. S/N Ratio ≥125db
11. Distortion ≤1%
12. Display -LED
13. Charging time -6 hours
14. Playing time (50% /100% volume) -4/2 hours
15. Output power -20W
16. Speakers -2 * 4”
17. Battery -2*Li-ion 3.7V,1500mAh

Disposal of electrical and electronic equipment

This symbol on the product or packaging means that the product should not be treated as household waste. Do not throw garbage at the end of its life, but take it to a collection center for recycling. in this way you will help to protect the environment and be able to prevent any negative consequences that it would have on the environment and human health. To find your nearest collection center:

• Contact local authorities
• Access the website: www.mmediu.ro
• Request additional information from the store where you

IMPORTER: SC INTERVISION TRADING-RO SRL
Street I.C Bratianu, no. 48-52, building A, floor. 5, room 504-505, Pitesti City, Arges County, Romania
Postal code: 110121

References

• Home | Ministerul Mediului

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>