Kmart 43140985 3-in-1 Activity Centre and Magnetic Art Easel Instruction Manual
- June 8, 2024
- Kmart
Table of Contents
Kmart 43140985 3-in-1 Activity Centre and Magnetic Art Easel Instruction
Manual
SAFETY PRECAUTIONS
Read all instructions before assembly and use of the activity centre. Keep instructions for future use.
WARNING
BEFORE ASSEMBLING THIS ACTIVITY CENTRE, READ AND UNDERSTAND THE INSTRUCTIONS. KEEP INSTRUCTIONS IN A SAFE PLACE FOR FUTURE REFERENCE. The product shall be assembled by an adult. Never leave a child unattended. Always keep child in view whilst in the activity centre. Only use on flat surfaces free of objects that could cause the activity centre to tip over. To avoid burns, keep the child away from hot liquids, ranges, radiators, space heaters and fireplaces etc. Do not use the activity centre if it is damaged or broken. Do not use until baby can sit up by itself. Discontinue seated use mode when child begins to walk. Remove packaging from activity centre vicinity after assembly. Use only accessories as recommended by the supplier. Check that the item is assembled correctly before use. This item is designed for use by a child 6 months + and up to 11 kgs. This activity centre should not be used by a child who cannot sit up unaided. Promptly replace any worn out or broken parts. The activity centre should not be carried with a child in it. Keep medication, strings, elastics and small toys out of reach from any position of the activity centre.
WARNING
FALL HAZARD
Babies can FALL from product resulting in head injuries.
- NEVER leave child unattended. ALWAYS keep child in view while in product.
- NEVER use near stairs.
- To avoid tip over, use product on a flat, level surface. STRANGULATION HAZARD Strings can cause STRANGULATION.
- DO NOT place items with a string around child’s neck, such as hood strings or pacifier cords.
- DO NOT suspend strings over product or attach strings to toys
Battery Safety nformation
In exceptional circumstances, batteries leak fluids that can cause a chemical burn injury or ruin your product. To avoid leakage:
- DO NOT mix old and new batteries or batteries of different types: alkaline, standard (carbon zinc) or rechargeable (nickle-cadmium).
- Insert batteries as indicated inside the battery compartment.
- Remove batteries during long periods of non-use.
- ALWAYS remove exhausted batteries from the product.
- Dispose of batteries safely.
- DO NOT dispose of this product in a fire. The batteries inside may explode or leak.
- Never short-circuit the battery terminals.
- Use only batteries of the same equivalent type, as recommended.
- DO NOT charge non-rechargeable batteries.
- Remove rechargeable batteries from the product before charging.
- If removable, rechargeable batteries are used, they are only to be charged under adult supervision.
CONGRATULATIONS
Congratulations on your purchase of the 3-in-1 Activity Centre & Magnetic
Art Easel
This product has been designed and developed with safety, comfort and
functionality in mind. Please take the time to read this manual carefully
before using this product and keep it in a safe place for future reference.
Contents
Assembly contents list
Assembly / Operating instructions
How to care for your Activity Center
ASSEMBLY CONTENTS
Check what you have received…
You have received 1 box. Please check the contents of the box against the list
below. If anything is missing, please contact Customer Service. In Australia,
contact CNP Brands on 1300 667 137, in New Zealand contact Wainhouse
Distribution on 0800 567 5000.
Supplied loose in box:
ASSEMBLY / OPERATING INSTRUCTIONS
To Assemble Frame…
-
Attach one Upper Leg Cap to one Leg until it snaps into place. Secure using 2 x 13mm screws.
-
Attach one Lower Leg Cap to the same Leg until it snaps into place. Secure using 2 x 13mm screws.
-
Repeat steps 1a – 2b for the remaining Leg.
-
Lay the Tray face down. Insert one Leg down into the long side of the Tray. Secure using 4 x 10mm Washer Head Screws.
-
Repeat steps 4b – 4c for remaining Leg. Ensure both Legs are tight and secure. Stand upright.
To assemble Seat Pad…
-
Place Seat Pad over the Seat Ring ensuring the Seat Pad tabs align with the grooves on the Seat Ring. Pull Seat Pad tabs over Seat Ring grooves until secure.
-
Align the Seat with space in Top Tray. Push down and into place.
To adjust Seat Pad height…
Push side buttons on side of clip and tighten or loosen to desired position.
For smaller babies, seat pad should be extended to its longest position. As
your child grows, the seat pad should be slowly adjusted to the shortest
position. The above will help prevent your child from being flat footed and
prevents your child from climbing out.
To install batteries in Piano Toy…
Using a Philips Head Screwdriver, unscrew the battery compartment lid and
insert 3 x AA batteries (not supplied). Re-secure battery compartment lid.
To assemble Toys…
-
Place the Activity Centre so that the largest toy recess is facing you. Insert Caterpillar Toy into top toy recess until secure.
-
Insert Toy Bar into toy recess on both sides of Caterpillar Toy until secure.
-
Insert 2 x Toy Loops into toy recess in front of Toy Bar until secure.
-
Insert Flower Toy into toy recess at front right of Tray until secure.
-
Insert Owl Toy into toy recess at front left of Tray until secure.
-
Ensure Piano Keys are facing into the Activity Centre, Insert Piano Toy into front toy recess until all securing tabs are engaged.
-
Open the Easel and store the 4 x Magnets inside.
-
Ensure the arrow on the Easel is facing up. Gently insert the Easel into the Leg opening until it is held in place.
To change direction of Piano Toy…
Release Piano Toy from Tray by pressing the release tab on underside of Tray
and pulling Toy away from Tray. Rotate Piano Toy to face away from Activity
Centre and re-assemble.
To operate Piano Toy…
-
First switch located on the back of the Toy is the volume control switch. To adjust volume, slide switch to desired setting.
-
Second switch located on the back of the Toy is the language control switch. To adjust language between English & Spanish, slide switch to desired setting.
-
Third switch located on the back of the Toy is the learning mode control switch. To switch between learning modes, slide switch to desired setting.
Mode 1: Lights & Sounds (This mode is focused on helping children learn colours, shapes, numbers and animals).
Mode 2: Music & Storybook Poems (This mode teaches children simple poems and music notes).
Mode 3: Find & Touch (This mode encourages children to find animals, colours and shapes
To convert to Play Centre…
-
Turn the Activity Centre on its side. Locate the tabs underneath the Seat Ring. Push at least two of these tabs in toward middle to release whilst pulling Seat away from Activity Centre.
-
Stand Activity Centre upright. Remove the Easel from the Leg and place into the Seat hole opening with the shape puzzle facing up
-
Open the Easel and remove the magnets. Close Easel and place magnets on top of shape puzzle.
To use Easel…
-
Remove Easel from the Leg opening. Open the Easel and flip out the back support to keep the Easel propped up
-
When not using the Easel, store the magnets inside the Easel and store the Easel in either of the Leg openings.
HOW TO CARE FOR YOUR CHILDCARE ACTIVITY CENTRE
Cleaning
This product has been designed and developed with safety, comfort and functionality in mind. Please take the time to read this manual carefully before using this product and keep it in a safe place for future reference. To ensure the long-lasting use of your activity centre, do not use abrasive cleaners.Always store product in a clean dry place. Seat Pad: Remove from seat.Cold machine or hand wash separately. Use mild soap or detergent if necessary. Frame: Wipe the frame with a soft, clean cloth and mild soap
Maintenance
Always check parts regularly for tightness of screws, nuts and other fasteners – tighten or replace if required. To maintain the safety of your walker, seek prompt repairs for bent, torn, worn or broken parts. Use only those parts and accessories approved by CNP Brands. If you have any difficulties in assembling the activity centre, please contact our Service Department. In Australia, contact CNP Brands on 1300 667 137, in New Zealand contact Wainhouse Distribution on 0800 567 5000.
Warranty
For all warranty terms and conditions, please visit cnpbrands.com.au
About CNP Brands
Currently, CNP Brands boasts one of the most diverse brand portfolios with a
combination of company owned brands and distribution agreements. Our own
brands, including Childcare, have gone from strength to strength in recent
years. Childcare, and our premium brand bebe care, demonstrate our commitment
to quality and continuinginvestment in product development.
Distributed in Australia by CNP Brands 82 Maribyrnong Street, Footscray, VIC,
3011
Customer Service 1300 667 137
W: www.cnpbrands.com.au
E: info@cnpbrands.com.au
F: www.facebook.com/CNPBrands
I: @cnp_baby
Customer Service: 0800 567 5000
E:helpline@wainhousedist.co.nz
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>