EXTOL CRAFT 252 Mini Air Compressor User Manual
- June 8, 2024
- EXTOL CRAFT
Table of Contents
EXTOL CRAFT 252 Mini Air Compressor User Manual
Introduction
Dear customer,
Thank you for the confidence you have shown in the Extol® brand by purchasing
this product.
This product has been tested for reliability, safety and quality according to
the prescribed norms and regulations of the European Union.
Contact our customer and consulting center for any questions at:
www.extol.eu
Technical specifications
| Power supply | 12 V |
|---|---|
| Maximum Operating pressure | 1.7 MPa (17 bar |
| Power cord length | 3 m |
| Hose length | 0.5 m |
Included contents
| Mini compressor | 1× |
|---|---|
| Attachment | 3× |
| User’s Manual | 1× |
The month and year of manufacture is shown on the product by means of a serial
number on the product‘s rating label.
The first four digits designate the year, the next two digits designate the
month, then the series number follows.
General safety instructions
Keep this „User‘s manual“ in good condition and store it near the product so that it is available if the user needs to reacquaint themselves with the product. If you lend or sell the product to somebody, never forget to include the complete user‘s manual with it.
This notification is used in the entire manual:
ATTENTION!
This notification is used for instructions that may lead to injury by
electrical shock, a fire and/or a serious injury of persons if not followed.
WARNING!
Please read all the instructions. Not adhering to any of the following
instructions may lead to injury by electrical shock, a fire and/or a serious
injury to persons.
Furthermore, a use that is in contradiction to this user‘s manual may void the
warranty on the product. The term „power tool“ in all hereafter provided
warnings is defined as an power tool powered from the power grid (via a power
cord) as well as a battery-
-powered tool (without a power cord).
Remember and store these instructions!
-
WORK ENVIRONMENT
a) Keep the working area tidy and well illuminated.
Untidiness and dark locations in the workplace are sources of accidents.
b) Do not use the power tool in environments where there is an explosion hazard, where there are flammable liquids, gases or dust. The power tool generates sparks which could ignite dust or vapors.
c) When using the power tool, prevent access to children and other persons. If you become distracted, you may lose control over the activity being performed. -
ELECTRICAL SAFETY
a) The plug on the power cord must correspond to the power socket outlet.
Never modify the plug in any way.
Never use any socket adapters with power tools that have a safety earth grounding connection.
Power plugs that are not damaged by modifications and that correspond to the power socket will limit the danger of injury by electrical shock.
b) Prevent your body from coming into contact with grounded objects, such as pipes, central heating radiators, stoves and refrigerators. The risk of injury by electrical shock is greater when your body is connected to the ground.
c) Do not expose the power tool to rain, dampness or wetness. The entry of water into the power tool increases the danger of injury by electrical shock.
d) Do not use the power cord for other purposes. Never carry or pull the power tool by its power cord or pull the plug out of the socket by the power cord. Protect the power cord against heat, grease, sharp edges and moving parts. Damaged or tangled power cords increase the danger of injury by electrical shock.
e) If the power tool is used outdoors, use an extension cord suitable for outdoor use. Using extension cords designed for outdoor use limits the risk of injury by electrical shock.
If you use the power tool in damp areas, use a power supply protected by a residual current device (RCD). The use of an RCD limits the danger of injury by electrical shock. -
SAFETY OF PEOPLE
a) Be attentive when using the power tool, pay attention to what you are currently doing, concentrate and use common sense. Do not work with the power tool if you are tired or under the influence of drugs, alcohol or medication. Momentary inattentiveness when using the power tool may result in serious injury to persons.
b) Use protective aids. Always wear eye protection.
Use protective aids such as a respirator, safety footwear with anti-slip soles, hard head cover or hearing protection appropriately to the work conditions; they reduce the risk of injury to persons.
c) Avoid accidentally starting up the power tool. Make sure that the power switch is turned off when inserting the plug into a power socket. Carrying the power tool with a finger on the trigger or connecting the power tool’s plug with the switch engaged may cause an accident.
d) Remove all adjustment tools and spanners before turning on the power tool. An adjustment tool or spanner left attached to a rotating part of the power tool may result in injury to persons.
e) Only work in locations that you can reach safely.
Always maintain a stable stance and balance. In this way you will have better control over the power tool in unexpected situations.
f) Dress in an appropriate manner. Do not wear loose clothing or jewellery. Make sure that your hair, clothing and gloves are at sufficient distance from moving parts. Loose clothing, jewellery and long hair may become caught in the moving parts.
g) If there is equipment available for the extraction and collection of dust, make sure that such equipment is connected and used correctly. The use of such equipment may limit the danger posed by the created dust. -
USING THE POWER TOOL AND CARING FOR IT
a) Do not overload the tool. Use tools that are designed for the work being performed. Appropriate power tools for a given task will do the job better and with greater safety.
b) Do not use power tools that cannot be turned on and off with a switch. Any power tools that cannot be controlled using a switch are dangerous and must be repaired.
c) Disconnect the power tool by pulling the plug out of the power socket before performing any adjustments, replacing accessories or before storing an unused power tool. These preventative safety measures limit the danger of accidentally starting the power tool.
d) When not used, store the power tool out of children’s reach and do not permit person not acquainted with the power tool or these instructions to use the power tool. A power tool in the hands of inexperienced users is dangerous.
e) Maintain the power tool. Check the adjustment of moving parts and their movement, focus on cracks, broken parts or any other circumstances that may threaten the proper operation of the power tool. If the power tool is damaged, have it repaired before using it again. Many accidents are caused by insufficiently maintained power tools.
f) Keep cutting power tools clean and sharp. Correctly maintained and sharpened cutting power tools are less likely to get stuck on material or to jam and they are also easier to control.
g) Use power tools, accessories, working tools, etc. in accordance with these instructions and in such a manner as prescribed for the specific power tool with respect to the given work conditions and the type of work being carried out. Using power tools for tasks other than for which they are designed may lead to dangerous situations. -
SERVICE
Have your power tool repaired by a qualified person that will use identical spare parts. This will ensure that the same level of safety will be achieved as before the repair of the power tool.
Features
The Mini Compressor Extol Craft is intended for inflating tyres on cars,
bicycles, inflatable toys, mattresses, etc.
The power supply is provided by means of a 12 V car cigarette lighter socket.
The compressor has a built in pressure gauge.
Reference to pictograms and labels
| Meets EU requirements
---|---
| Before starting it for the first time, carefully read the user’s manual.
| Protective glasses are unconditionally necessary during operation.
Use and safety instructions
- Start the car and insert power adapter of the compressor into a 12 V car cigarette lighter socket.
- Seat the end on to a valve and lock it in place using the lever.
- While inflating, take care that the maximum pressure does not destroy the inflated item.
- If the compressor begins to overheat, disconnect it and continue after a short while.
ATTENTION
For safety reasons, tyres must be inflated to their prescribed pressure.
Waste disposal
It is necessary to dispose of the product at the end of its service life in
accordance with the applicable legislation.
The product contains electric/electronic components.
Do not throw this product in with communal waste, take it to a processor of
waste materials or to a recycling center or to a collection location for this
type of waste.
Operating liquids are dangerous waste.
Handle them in accordance with valid legislation and according to their
manufacturer‘s instructions.
ES Declaration of Conformity
Subject of declaration – model, product identification:
Extol Craft 252
Air compressor 12 V
Manufacturer Madal Bal a.s. Bartošova 40/3, CZ-760 01 Zlín • Company ID No.: 49433717
hereby declares that the product described aboveis in conformity with all
relevant stipulations of harmonisation legal regulations of the European
Union:
2006/42 ES; (EU) 2011/65; (EU) 2014/30;
This declaration is issued under the exclusive responsibility of the
manufacturer.
Harmonisation norms (including their amendments, if any exist), which were
used in the assessment of conformity and on the basis of which the Declaration
of conformity is issued:
EN 60335-1:2012; EN 1012-1:2010; EN 62233:2008; EN ISO 12100:2010; EN
55014-1:2017; EN 55014-2:2015; EN IEC 63000:2018;
The technical documentation (2006/42 ES) was drawn up by Martin Šenkýř at the
business address of Madal Bal a.s., Průmyslová zóna Příluky 244, 760 01 Zlín,
Czech Republic.
The technical documentation (2006/42 ES) is available at the aforementioned
business address of Madal Bal, a.s.
Place and date of issue of ES Declaration of Conformity: Zlín 11.05.2020
On behalf of
Madal Bal, a.s.:
Martin Šenkýř
Member of the Company‘s Board of Directors
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>