Cambridge C10800K Audio SPEAKER BASE WITH BLUETOOTH USER MANUAL
- June 8, 2024
- Cambridge
Table of Contents
Cambridge C10800K Audio SPEAKER BASE WITH BLUETOOTH USER
MANUAL
IMPORTANT SAFETY INSTRUCTIONS
For your own safety please read the following important safety instructions carefully before attempting to connect this unit to the mains power supply. They will also enable you to get the best performance from and prolong the life of the unit:
-
Read these instructions.
-
Keep these instructions.
-
Heed all warnings.
Follow all instructions. -
Do not use this apparatus near water.
-
Clean only with a dry cloth.
-
Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
-
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
-
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
-
Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles and the point where they exit from the apparatus.
-
Only use attachments/accessories specified by the manufacturer.
-
Unplug this apparatus during lightning storms or when unused for long periods of time.
-
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as the power-supply cord or plug having been damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
WARNING : TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE AND OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHOULD NOT BE PLACED ON THIS APPARATUS.
WEEE SYMBOL
The crossed-out wheeled bin is the European Union symbol for indicating
separate collection for electrical and electronic equipment. This product
contains electrical and electronic equipment which should be reused, recycled
or recovered and should not be disposed of with unsorted regular waste. Please
return the unit or contact the authorised dealer from whom you purchased this
product for more information.
CE MARK
This product complies with European Low Voltage (2014/35/EU), Electromagnetic
Compatibility (2014/30/EU) and Environmentally-friendly design of Energy-
related Products (2009/125/EC) Directives when used and installed according to
this instruction manual. For continued compliance only Cambridge Audio
accessories should be used with this product and servicing must be referred to
qualified service personnel.
VENTILATION
IMPORTANT – The unit will become hot when in use. Do not stack multiple
units on top of each other. Do not place in an enclosed area such as a
bookcase or in a cabinet without sufficient ventilation. Ensure that small
objects do not fall through any ventilation grille. If this happens, switch
off immediately, disconnect from the mains supply and contact your dealer for
advice. Please ensure there is ample ventilation (at least 20cm clearance on
the top, side and rear). Do not put any objects on top of this unit. Do not
situate it on a rug or other soft surface and do not obstruct any air inlets
or outlet grilles. Do not cover the ventilation grilles with items such as
newspapers, tablecloths, curtains, etc.
POSITIONING
Choose the installation location carefully. Avoid placing it in direct
sunlight or close to a source of heat. No naked flame sources, such as lighted
candles, should be placed on the unit. Also avoid locations subject to
vibration and excessive dust, cold or moisture. The unit can be used in a
moderate climate. This unit must be installed on a sturdy, level surface. Do
not place in a sealed area such as a bookcase or in a cabinet. Do not place
the unit on an unstable surface or shelf. The unit may fall, causing serious
injury to a child or adult as well as serious damage to the product. Do not
place other equipment on top of the unit. Due to stray magnetic fields,
turntables or CRT TVs should not be located nearby due to possible
interference. Electronic audio components have a running in period of around a
week (if used several hours per day). This will allow the new components to
settle down and the sonic properties will improve over this time.
POWER SOURCES
The unit should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power-supply to your home, consult your product dealer or local power company. This unit can be left in Standby mode when not in use and will draw <0.5W in this state. If you do not intend to use this unit for a long period of time, unplug it from the mains socket.
OVERLOADING
Do not overload wall outlets or extension cords as this can result in a risk of fire or electric shock. Overloaded AC outlets, extension cords, frayed power cords, damaged or cracked wire insulation and broken plugs are dangerous. They may result in a shock or fire hazard. Be sure to insert each power cord securely. To prevent hum and noise, do not bundle the interconnect leads with the power cord or speaker leads.
CLEANING
To clean the unit, wipe its case with a dry, lint-free cloth. Do not use any
cleaning fluids containing alcohol, ammonia or abrasives. Do not spray an
aerosol at or near the unit.
BATTERY DISPOSAL
Batteries may contain substances harmful to the environment. Please dispose of
any discharged batteries with due consideration and in accordance with local
environmental/electronic recycling guidelines.
SERVICING
These units are not user serviceable. Never attempt to repair, disassemble or
reconstruct the unit if there seems to be a problem. A serious electric shock
could result if this precautionary measure is ignored. In the event of a
problem or failure, please contact your dealer.
FCC
FEDERAL COMMUNICATIONS COMMISSION NOTICE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the distance between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
FCC RADIATION EXPOSURE STATEMENT:
This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
MODIFICATIONS
The FCC requires the user to be notified that any changes or modifications to
this device that are not expressly approved by Cambridge Audio, may void the
user’s authority to operate the equipment.
CANADA-INDUSTRY CANADA (IC)
This radio transmitter has been approved by Industry Canada. This Class B
digital apparatus complies with Canadian standard ICES-003. This device
complies with Industry Canada License exempt RSS standard(s). Operation is
subject to the following two conditions.
- this device may not cause interference and
- this device must accept any interference, including interference that may cause undesired operation of the device.
This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. The transmitter must not be co- located or operating in conjunction with any other antenna or transmitter.
EUROPE-EUROPEAN UNION NOTICE
Radio products with the CE alert marking comply with the RED Directive (2014/53/EU) issued by the Commission of the European Community. Compliance with this directive implies conformity to the following European Norms.
- EN 60065 – Product Safety.
- EN 300 328 – Technical requirement for radio equipment.
- EN 301 489 – General EMC requirements for radio equipment.