TRADEPRO Deadbolts Trade Range Instruction Manual

Installation Instructions for Deadbolt

Deadbolts Trade Range

Step 1.

• Mark the Door as shown and use the template as guide.

Step 2.

• Drill the holes as shown.

Step 3.

• Prepare rebate
• Install the latch and screw to tighten.

Step 4.

• Prepare rebate
• Install the strike and screw to tighten.

Step 5.

• Install the outside cylinder as shown.
• The drive tail is positioned horizontally.

Step 6.
Install Thumbturn

• For Single Cylinder functions, please install the thumbturn as per diagram.

Install Cylinder

• For Double Cylinder functions, install the exterior and internal parts as shown in the diagram.

NOTE: Carefully follow these instructions when installing.
Screws to be tightened to a recommended 2.5Nm torque.

Gainsborough Hardware Industries Limited,
Melbourne, Australia. A.B.N. 25 004 792 269
www.gainsboroughhardware.com.au
AT 000
DGP-A00P12-00
MAR ‘15

References

• Gainsborough Hardware Home

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>