orolia STIM210 Evaluation Tools User Guide
- June 8, 2024
- orolia
Table of Contents
orolia STIM210 Evaluation Tools
EVALUATION TOOLS
- PCIe card with communication and power cable
- USB adapter with communication and power cable
- PC software
- User manual
- Measurement data access
- Full device configuration capability
- Data log to file for up to two devices at the same time
INSTALLATION
The STIM series evaluation tools offer easy measurement and configuration
access for STIM gyro modules and IMUs.
The tools support data sampling at alternative rates, graphical data
presentation and data log to file for up to two gyro modules/ IMUs in
parallel.
RS422 interface for PCIe or USB, necessary cabling and PC software are
included in the kits.
STIM EVK PCI
The STIM EVK PCI kit is the preferred solution for thorough device
characterizing.
The PCI kit contains a PCIe card and a communication & power cable, and
supports all device transmission bit rates.
STIM EVK USB
The STIM EVK USB kit with USB connectivity provides an easy setup for a laptop
or PC with access to measurement and device configuration. The kit includes a
USB to RS422 adapter and acommunication & power cable.
Readable parameters
- Part number
- Serial number
- Firmware revision
- Hardware revision
Configurable parameters
- Datagram type/ content
- Sample rate
- Filter bandwidth
- Gyro output unit
- Accelerometer and inclinometer output units (for IMUs only)
- RS422 transmission bit rate
- Line and datagram termination
Diagnostics information
Detailed diagnostics information can be accessed, including RAM and flash
checks, stack handling checks, status of internal voltage supply references
and various parameter reports for each measurement axis.
Additional information
- The communication and power cable for STIM210 and IMUs has electrical break out pins for External trigger
- Additional communication and power cables, PCIe cards and USB cables are available
- Kits do not include the gyro module or IMU
- Windows 10, XP, Vista and 7 (32/64 bit) supported
- Time of Validity (TOV), external trigger and AUX input functionality are not supported by the evaluation software
STIM GYRO MODULE AND IMU EVALUATION KITS
SOFTWARE PRINT SCREENS (EXAMPLES ARE SHOWN FOR STIM300-STIM377H EVK)
information furnished by Salran is believed to De accurate and reliable,
however, no responsivity is assumed Dy Safran tor ts use, nor tor any
infringements or patents or other agents or third parties that may resuit from
ts use. Salran reserves the right to make changes without further notice to
any products herein. Satran makes no warranty, representation or guarantee
regarding the suitability of its products tor any particular purpose,is
granted by implication or otherwise under any patent or patent rights of
Safran. Trademarks and registered trademarks are the property of their
respective owners. Safran products are not intended for any application in
which the failure of the Salran product could create a situation where
personal injury or death may occur. should Buyer purchase or use Satran
products tor any such unintended or unauthorized application, Buyer shall
indemnify and hold Safran and its officers, employees, Subsidiaries,
titillates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable legal fees arising out of, directly or indirectly,
any claim or personal injury or death associated with such unintended or
unauthorized use, even n such Claim alleges that Saran was negligent regarding
the design or manufacture or the part.
[email protected]
safran-sensing-technologies.com