IVECO KIT-6IDVII Daily VII Double DIN Facia Plate Instruction Manual

IVECO KIT-6IDVII Daily VII Double DIN Facia Plate

Model: Daily VII

Year: 2019

Kit content : double DIN facia plate; mounting brackets + screws; SWRC CAN bus & LIN bus wiring harness; antenna adapters; camera adapter; USB/AUX adapter; speaker adapter

Content and wiring harness connections

ATTENTION!
In order to prevent ESD damage, the STEERING WHEEL REMOTE JACK (10) must be connected before plugging in the connectors on car side.

1. to RADIO connector

2. to CAR connector

3. POWER ANTENNA output

4. REMOTE output

5. to LIN BUS – to Brown cable (point 7 page 4-5)

6. to LIN BUS – to White cable (point 7 page 4-5)

7. SPEED output (Green) →to

8. SPEED input of Head Unit

9.  Configuration setting S1/S2

10. for future reference:

11. Black – GROUND

12. Yellow – POWER 12V+

13. Red – ACC (IGNITION)

14. to WIRED SWRC REM Socket

15. Speaker connection (point 9 / page 6) 12 – CAN BUS access (point 7 / page 4-5) 13 – FAKRA antenna adapter

16.  ISO/DIN antenna adapter

17. USB/AUX adapter
    OPTIONAL 1 →C1 (point 7 / page 4-5) OPTIONAL 2 →(point 9 / page 6)

18. This is how the original dashboard looks like.

19. Remove the drawer and unscrew the two screws as shown in the picture.

20. Remove the rubber compartment as shown in the picture.

21. Unscrew the central screw and remove the original facia.

22. In order to fit the radio unit some plastic parts need to be cut and removed. The parts to be removed are the four flaps and the plastic rectangular central protrusion highlighted in the pictures.

23. Connect the harness as indicated on left side (page 2).

7. Set the harness according to the configuration of your vehicle.

8. Steering wheel remote controls functions.  

Iveco Daily VII steering wheel remote controls functions

  1. Volume +
  2. Mute
  3. Volume –
  4. Seek +
  5. Source
  6. Seek –
  7. Accepting incoming call
  8. Voice
9. Pair your phone and make a call.  

If you hear the audio from WRONG SPEAKERS → install OPTIONAL 2 (see page 2 point 11).

10. Take the left and right brackets and fix them with the supplied screws as shown in the picture.  

Connect the harness as indicated on page 2.

11. Make all connections, check the proper functioning of the whole system and fix the head unit with the OEM screws as shown in the picture.
12. Fix the metal bracket with the supplied screw as shown.
13. Mount the facia plate on the dashboard.  

This is the final result

14. Connectivity Layout

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>