QAZQA Cascada WL Instruction Manual
- June 8, 2024
- QAZQA
Table of Contents
QAZQA Cascada WL
Instructions
Cascada WL
98695/98696/105239 
This product contains a light source of energy efficiency class E
QR
EAN
- 98695:8718881098758
- 98696:8718881098765
- 105239:8718881135798
Replaceable (LED only) light source by a professional.
Replaceable control gear by a professional.
SAFETY INSTRUCTION
Please study the instruction manual and below information carefully before installing or using this product. Please keep this user manual for further reference
-
The luminaires may only be installed by authorized and qualified technicians according the valid regulations for electrical installation.
Maintenance of the luminaires is limited to their surfaces. During maintenance no moisture can come into contact with any areas of the terminal connections or voltage control parts.
The electrical supply must be switched off at the outset, preferably by means of a switch in the distribution box, before any installation, maintenance or repair work is undertaken. -
Exterior lighting must not be installed during rain.
-
Take account of the minimal separation distance from other objects and the room required around the fitting.
-
If in any doubt, consult a professional, taking local installation requirements into account. Some countries stipulate that lighting may be installed only by registered installers.
-
Clamping screws in electrical connections must be adequately tightened. This is particularly the case with 12V low voltage conductors.
-
Clean with a clean, dry cloth or brush, use no solvents or abrasives. Avoid dampness on all electrical components
-
Take account of all available technical information.
-
Meaning of symbols:
Take note of the symbols when connecting wires:
- Live Conductor
- Earth Conductor
- Neutral Conductor
FittinQ B.V.
Smaragdweg 52, 5527 LB Hapert, The Netherlands
www.qazqa.n
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>