Shenzhen Moday Cultural Creation D20 Charging Case User Manual
- June 8, 2024
- Shenzhen Moday Cultural Creation
Table of Contents
Shenzhen Monday Cultural Creation D20 Charging Case
Description
- Charging case
- Dice
Specification
- Item: Electronic lighting Dice
- D20
- Charging case: ABS+PP
- Dice: Resin
- Charging case size: 565138mm
- Dice size: 22.2mm
- Weight: Charging case: 41g,
- Dice: 8g
- Battery: Charging case lithium 250mAh, Dice lithium 25mAh
- Input electric: ≤400mA
- Input voltage: 5V±0.5V DC
- Rated power: 1.5W
- Charging time: 1h
- Using time: 2h
- Accessories: Type C cable, Manual, lanyard, Box, charging case, Dice
Function
- Dice
- Movement Monitoring : when rolling the dice, it can read the Number on top when it is stable , and the dice body will light.
- Bluetooth: It can be connected with App via Bluetooth mobile. The color of Dice light and mode can be automized in APP.
- If dice is in low battery, it will go into low power mode automatically and will not light to save power. When you put the dice into the case, it will be charged automatically. ( The charging cell is near Number 1, so put “20” face up, “1”at bottom.)
- Charging case
- Long press the button 5S, it will start charging.
- Dice charging: indicator will flicker in red.
- Finish dice charging: case charging function will be off automatically.
- Battery case in low battery: indicator will flicker in orange.
USE 5V adapter :
- Charging case itself not dice: indicator will flicker in green. When it is full power, indicator will keep green.
- Charging case and dice together: indicator will flicker in red and green.
Caution:
- Not using dice and case in any environment above 55℃;
- Dice and case are forbidden to put into fire.
- It is not waterproof product, no any liquid like water, rain are allowed
FCC
Caution:
- This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
- The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>