TECWARE PHANTOM plus RGB Mechanical Keyboard User Guide
- June 8, 2024
- TECWARE
Table of Contents
- TECWARE PHANTOM plus RGB Mechanical Keyboard
- Key Features
- Multimedia Function
- RGB Controls
- Connectivity
- Various LED modes can be triggered by Fn + Mode Keys
- BT Pairing
- 2.4G Wireless Pairing
- Switch Functions
- Macro
- Package Contents
- Installation
- Warranty
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
TECWARE PHANTOM plus RGB Mechanical Keyboard
Key Features
- My Computer
- Home
- Calculator
- Media Player
- Reverse
- Forward
- Play/ Pause
- Stop
- Volume Mute
- Volume Decrease
- Volume Increase
- BT Device 1
- BT Device 2
- BT Device 3
- Wireless 2.4G Mode
- LED Lighting Direction
- LED Color Selection
- Windows Lock
- Lighting Mode 1
- Lighting Mode 2
- Lighting Mode 3
- Lighting Mode 4
- Lighting Mode 5
- Lighting Mode 6
- Brightness Increase
- Brightness Decrease
- LED Lighting Speed Decrease
- LED Lighting Speed Increase
- Caps Lock Indicator
- Windows Lock Indicator
Multimedia Function
RGB Controls
Connectivity
Various LED modes can be triggered by Fn + Mode Keys
More modes of functions can be accessed via our software. You can download it at www.tecware.co Software only works with Windows.
BT Pairing
BT Name : “TWPE87 BT 3.0” or “TWPE87 BT 5.0” I
- Press and hold “FN+(1/2/3)” for 3 seconds until LED is blinking.
- Turn on Bluetooth for the device you wish to connect to and connect to “TWPE87 BT 3.0” or “TWPE87 BT 5.0”. Depending on which BT mode you would like to use.
- Once the LED stops blinking, your keyboard is now paired to your device.
- You can pair up to 3 devices via BT.
2.4G Wireless Pairing
2.4G Wireless Name: 2.4G Wireless Receiver
- Press and hold “FN+ 4” for 3 seconds until LED is blinking.
- Plug the USB dongle into your PC.
- Once the LED stops blinking, your keyboard is now paired.
Switch Functions
Battery Level Indicator
Windows / Mac Mode
![TECWARE-PHANTOM-plus-RGB-Mechanical-Keyboard-FIG-12](https://manuals.plus /wp-content/uploads/2023/01/TECWARE-PHANTOM-plus-RGB-Mechanical-Keyboard- FIG-12.png)
Reset to Factory Settings
Press and hold “FN+ESC” until the LEDs on your keyboard reset.
Swap Arrow Keys & WASD
Press and hold “Fn+W” for 3 – 5 seconds to swap Arrow Keys and WASD keys.
Macro
To Create a Macro
- STEP 1 : Click on the Macro Management Tab and Click on the “+” sign to create new macro.
- STEP 2 : Select the newly created Macro and Type your macro name in the box below. Click on “Rename” to rename the selected macro.
- STEP 3 : Click on “REC” to start recording the macro instructions. Click on “STOP” to save macro.
To Assign a Macro
- STEP 1 : Select the “Button settings” Tab.
- STEP 2 : Click on the key you would like to assign the macro and select “Macro Function”.
- STEP 3 : Select the macro you selected and choose the prefered releasing method.
- STEP 4 : Press”Save Icon” to save settings.
Keycap Removal
Use the supplied keycap puller and press down on to the keycap to secure the
puller on it. Pull the keycap puller directly upwards to remove the keycap. If
the switch is removed as well, simply pull the keycap off the switch and just
reattach the switch on to the keyboard.
Switch Removal
Rotate the switch puller too to a vertical position to coincide with the
switch locks located at the top and bottom of each switch. Push the switch
locks in and pull the switch puller directly upwards. We suggest to take extra
care when removing switches so as not to bend the switch pins. Please also
take extra caution so as not to scratch the keyboard’s backplate.
Check switch pins
Please inspect each switch to make sure the switch pins are straight before
inserting them to the keyboard. Make necessary adjustments if needed as
inserting them with bent switch pins may further damage the switch
Inserting a new switch.
Align the switch pins to the holes of the keyboard. The switch will snap on to
place and test immediately for response.
Package Contents
- TECWARE PHANTOM+ ELITE Keyboard
- Spare Mechanical Switch x 4
- Keycap Puller x 1
- Switch Puller x 1
- Coiled USB-C Cable x 1
- 2.4gHz Wireless USB Dongle
Installation
No driver installation is required for this product, the operating system should auto detect the keyboard when you plug it into your computer.
Warranty
1 Year. Please contact your local distributor for support.
Spare Mechanical Switch Kit
There might be occasions where a mechanical switch might fail. Please refer to
our website at www.tecware.co for instructions on how
to easily replace the faulty switch on your keyboard.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>