DALI MS715 Series Infrared Thermal Imaging Camera User Guide

: June 8, 2024
: DALI

Table of Contents

DALI MS715 Series Infrared Thermal Imaging Camera
Buttons & Interface
Menu operation
Menu instruction
FCC Warning
Read User Manual Online (PDF format)
Download This Manual (PDF format)

DALI MS715 Series Infrared Thermal Imaging Camera

Buttons & Interface

No.	Items	Instruction
1	Power

Short press: standby/wake up
Long press: Power on or off

2| Menu|

Short press: switch the image mode
Long press: to menu
Menu mode: indicates confirmation

3| Laser|

Short press: turn on or off the laser indicator
Long press: turn on/off laser ranging
Menu mode: function return

4| Zoom|

Short press: e-zoom
Long press: uniformity correction
Menu mode: function and parameter upward selection

5| Camera|

Short press: capture the picture and exit the recording
Long press: enable the recording
Menu mode: function and parameter downward selection

M

e m o r y

c a p a c i t y

| S

c e n e

m o d e

| P

s e u d o

c o l o r

| I

m a g e

s c h e m a

| I

m a g e

m a g n i

f i c a t i o n

s

| E

x t e r n a l

v i d e o

o u t p u t

| W

i r e l e s s

h o t s p o t

| L

o w

p o w e r

m o d e

| B

a t t e r y

| S

y s t e m

t i m e

---|---|---|---|---|---|---|---|---|---
| | | | t a t e| | | | |
---|---|---|---|---|---|---|---|---|---

Operation Interface figure.1

Menu Interface figure. 2

To enter the menu mode: press and hold the key.
To switch functions and adjust parameters: press Zoom in or camera
Confirm function: Press Menu key to select the function.
Function return : presess the laser key to return to the upper r menu, and hold down to exit the menu.

The center area is enlarged 2 times by y default. is started, the the image in the picture is enlarged by 2X, 2X, 4X, 8X and 16X cycles.
WIFI：Android system can go to the official website to download the he mobile phone client program “IR-TRATRACKER Ⅴ”. After install and run the mobile bile phone client program in the first time “model _ serial number”), and the software, click the software “Connect” to see the image, the mobile phone client software can be used to to realize the image taking, recording, playback, storage and other functions. The WiFi name and password can be customized on the client after connection.
Note: Turning on WIFI IFI for a long time will increase the power consumption of the device, and shorten the standby time. Please turn off this function when no function when not in use.
Scene function: choose natural , enhanced , and bright scene modes, which can be used used in special scenes such as rainy and foggy days to enhance object observation.
Hotspot trackining function: When enabled, it can assist to track the highest temperature target.
Cross demarcationon setting: When the cursor is turned on, you can an select two cursor styles (styles 1, 2)2), three cursor colors (red, yellow, and green), and move the cursor X-axis
Device brightness setting: supports adjustment of the screen brightness of the 5 eyepiece display.
pseudo color label setting: white heat, black heat, iron red, , red heat, ocean, desert, forest. Note: The image under the col will automatically switcally switch to the color fusion mode.
Image setting: g: can set brightness , contrast and red display trigger values in natural scene mode.
Low power mode e setting: When the low power mode is enabled, on only some functions are enabled, for increasing the battery working time by more than 50%.
Auto sleep setting: The optional auto sleep time is 0min, 5mi5min, 30min, and 60min. If no operation is performed during this period, the eyepiece will be automatically closed, , and the device will increase the battery life f e of the standby state with low power consumption. Press any key to restore the the standby sleep state.
Zoom in: zoom in m in continuously from 1.0X to 8.0X.
GPS function: when enabled, the device can be self-positiononeed.
Electronic compompass function: when started, the device horizontal roll and pitc Angle value in real time.
System Settings: the following functions of the instrument t c can be set after entering the system. Compass correcorrection: The electronic compass can be re-corrorrected. Compass correction is performed as follows:
After entering this function, it is recommended to rotate the instrument by the “8” shape. When the X,Y and Z all reach 100%, press any key to to end it.
Range measurement unit setting: can be carried out in feet t “ft” and meters “m”.
System upgrade: The system can be upgraded. The upgrade de operations are as follows:
Preparations: Download d the upgrade program file from the PC (for or details, contact Huawei technical support), ), and copy the bin upgrade program to the he root directory of the storage space on the device.
Instrument upgrade: Click this function inside the device and select Upgrade. After the device upgrade is complete, long press the “Power” key to read the the bar and shut down, then restart it again to complete.
- Format: the storage contents.
- Restore factory Settings: Restore factory Settings.
- Local information: allows you to view local information.

USB charging/data interface

When charging, remove the interface cover of the device and insert the Type-C charging cable (voltage DC5V/2A) for charging.
Open the interface cover of the device, connect the computer with a USB cable, and copy photos and video data files.

Real-time video output

When in use, open the interface cover of the device and insert the HDMI cable to access the display on the monitor or other long-distance transmission.

Attentions:

Because the uncooled infrared telescope uses a very sensitive heat sensor, do not point the lens directly at a strong radiation source (such as the sun, laser beam, or reflection) under any circumstances (starting or shutting down), otherwise permanent damage will be caused to the uncooled infrared telescope!
Use a wiping cloth with water to gently wipe and clean the infrared lens. Do not use organic solvents or sharp hard objects to clean the infrared lens, so as to avoid the lens film falling off!
laser ranging function once is opened, do not shine on the eyes, so as not to cause harm!
When the device is used for the first time, please check the power, if necessary, charge for three hours before use. If USB charging, please place the device at room temperature environment.
Do not open the enclosure or modify it without authorization. Maintenance matters can only be carried out by authorized personnel of our Company.

FCC Warning

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference, and
This device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

The SAR limit adopted by USA is 1.6 watts/kilogram (W/kg) averaged over one gram of tissue. The highest SAR value reported to the Federal Communications Commission (FCC) when it is tested for use at the body is under limit 1g 1.6W/Kg and the head is under limit 1g 1.6W/Kg.
The device complies with the RF specifications when the device is used near your head or at a distance of 0 mm from your body. Ensure that the device accessories such as a device case and a device holster are not composed of metal components.