Honeywell E671781 BACnet WiFi Adapter (BACA-A) User Manual
- June 8, 2024
- Honeywell
Table of Contents
Honeywell E671781 BACnet WiFi Adapter (BACA-A) User Manual
MOUNTING AND OPERATING INSTRUCTIONS
Keep these instructions together with the device or with the equipment
documentation!
⚠ CAUTION: To comply with FCC RF exposure compliance requirements, the BACnet WiFi Adapter must be installed at such a location as to ensure that it is always separated from all persons by a distance of at least 20 cm when in operation! It is prohibited to co-locate or operate it in conjunction with any other transmitter.
PURPOSE: The BACnet WiFi Adapter talks BACnet IP via WiFi and includes a router to BACnet MS/TP. It can be used for commissioning and debugging BACnet systems.
CYBER SECURITY: After use, the BACnet WiFi Adapter should not be left on site and/or connected with the controller or BACnet bus. Rather, it should be disconnected and stored in a secure place. This is to prevent unauthorized system access.
STANDARD PROCEDURE (STEPS 01A 06A) FOR CONNECTING BACNET WIFI ADAPTER TO NETWORK WHEN USING MOBILE DEVICE RUNNING ON ANDROID OPERATING SYSTEM
WPS PROCEDURE (STEPS 01B 06B) FOR CONNECTING BACNET WIFI ADAPTER TO NETWORK WHEN USING MOBILE DEVICE RUNNING ON ANDROID OPERATING SYSTEM SOFTWARE VERSION 8 OR EARLIER
Manufactured for and on behalf of the Connected Building Division of Honeywell Technologies Sàrl, Rolle, Z.A. La Pièce 16, Switzerland by its Authorized Representative:
Home and Building Technologies Honeywell GmbH Böblinger Strasse 17 71101
Schönaich, Germany
Phone +49 (0) 7031 637 01
Fax +49 (0) 7031 637 740
http://ecc.emea.honeywell.com
MU1B-0592GE51 R0521D
Subject to change without notice