AUTEL ROBOTICS Live Deck 2 Video Transmitter User Guide
- June 8, 2024
- AUTEL ROBOTICS
Table of Contents
AUTEL ROBOTICS Live Deck 2 Video Transmitter
Disclaimer
Thank you for purchasing the Live Deck 2 (hereinafter referred to as the “Product”). Read this disclaimer carefully before using this Product. By using this Product, you hereby agree to this disclaimer and signify that you have read it fully. Please use the Product in strict accordance with the manual and be sure to pay attention to the Warnings.
AUTEL ROBOTICS CO., LTD. (hereinafter referred to as “AUTEL ROBOTICS”)
assumes no liability for damage(s) or injuries incurred directly or indirectly
from improper use of this Product. Misuse includes, but is not limited to,
short-circuiting, overheating, introducing foreign materials into the Product.
This Product and manual are copyrighted by AUTEL ROBOTICS with all rights
reserved. No part of this Product and manual shall be reproduced in any form
without the prior written consent or authorization of AUTEL ROBOTICS.
Product Info
Introduction
The Live Deck 2 supports a wireless connection with UAV and a real-time image transmission within 12km under barrier-free conditions. The image transmission system and the remote control system work on the bands of 2.4GHz/5.8GHz/900MHz, and can play 1080P 60fps HD video in real time through HDMI port.
Component
1. Antenna| Communicate with the aircraft via a 2.4GHz/5.8GHz/900MHz
(adaptive aircraft band) RF signal
---|---
2. LED battery
level indicators| 4 LED battery level indicators
3. Ethernet port| Supports 100M Ethernet. Supports real-time video watching,
uploading and online live broadcasting on PC APP (need to download
corresponding application)
4. USB Type A| Connects to mobile devices, supports real-time video watching
on mobile APP (iOS and Android)
5. HDMI port| Connects to a monitor that supports HDMI and outputs HD video
up to 1080P 60fps
6. Type-C port| USB Micro B charging port, support some fast charging
protocols
7. Pairing button/indicator| Short press on the button and start pairing.
After pairing with the aircraft successfully, the indicator frequency is the
same as the indicator flashing frequency on the aircraft
8. Power button| Press and hold the power button for 2s to turn on/off the
Live Deck
9. SD card port| Upgrade the Live Deck 2 through SD
LED Indicator Description
Battery Level Indicator
| Battery Level Indicator | Current Power level |
|---|---|
| 87.5%~100% | |
| 75%~87.5% | |
| 62.5%~75% | |
| 50%~62.5% | |
| 37.5%~50% | |
| 25%~37.5% | |
| 12.5%~25% | |
| 0%~12.5% | |
| 0% |
Solid Green Flashing Green Light Off
Power Button Indicators
Power On: When power off, press and hold the power button for 2 seconds to
turn on the power.
Power Off: When power on, press and hold the power button for at least 2
seconds to turn off the power.
Setting Up the Live Deck
-
Attach the Antennas
Attach the 2 antennas to the module and tighten the antennas.
-
Connect to a Display Device
HDMI, USB Type A, and Ethernet port can output display information. Please select one or several ports to connect to your devices accordingly. -
Using HDMI: connect the HDMI cable to a monitor that can support HDMI or DVI format. The video resolution can be up to 1080P60.
-
Using USB Type A: connect the data cable to a mobile device (smartphone or tablet). Open App to display HD video and flight control
OSD information. -
Using Ethernet port: connect the cable to a computer. Please download and install a player that supports RTSP protocol network
video streaming to display HD video and flight control OSD information.
Note
The Live Deck 2 supports connecting the HDMI, Ethernet port and USB port to
Android devices at the same time. When the USB port is connected to an iOS
devices, the HDMI and Ethernet port will not display image.
Product Specifications
| Weight (battery included) | 424.5g |
|---|---|
| Dimensions | 15211123.2mm (antennas folded) |
223.915223.3mm (antennas unfolded)
Ingress Protection| IP43
RF Receiver Operating Frequency| 902~928MHz (FCC);
2.4GHz~2.4835GHz;
5.725 GHz~5.850GHz (Non-Japan);5.650-5.755GHz (Japan)
Transmission Power (EIRP)| 900MHz: FCC<=33dBm
2.4GHz: FCC/NCC<=33dBm; CE/MIC/SRRC/KC<=20dBm 5.8GHz/5.7GHz: FCC/SRRC/
NCC<=33dBm;KC<=20dBm;CE<=14dBm
Max Video Transmission Distance| 12km
Max Operating Time| 5h
Operating Current/Voltage| 1.3A/3.85V (not connected to smartphone)
Battery Type| Li-Po
Battery Capacity| 6200mAh
Power Consumption| 5W
Operating Temperature| 14°F~104°F (-10°C~40°C)
Operating Humidity| 95%RH
HDMI| 1080p@60 fps
Ethernet| 100M
Supported Model| EVO II Pro V3 / EVO II Dual 640T V3
EVO II RTK Series V3/ EVO II Enterprise V3
FCC and ISED Canada Compliance
This device complies with part 15 of the FCC Rules and ISED Canada license- exempt RSS standards. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Note
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
RF Exposure Information
This equipment complies with RF radiation exposure limits set forth for an
uncontrolled environment. This equipment should be operated with minimum
distance 20cm between the radiator and your body.
EU/UK Compliance
Autel Robotics Co., Ltd. hereby declares that this wireless device is in
compliance with Directive 2014/53/EU and Radio Equipment Regulations 2017.
Autel Robotics Co., Ltd.
9th Floor, Building B1, Zhiyuan, Xueyuan Road, Xili,Nanshan,Shenzhen,518055,
China 22522 29th Dr SE STE 101, Bothell, WA 98021 United States
Toll-free: (844) MY AUTEL or
844-692-8835
www.autelrobotics.com
© 2022 Autel Robotics Co., Ltd. All Rights Reserved
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>