DOSEAO BHR-N22001 Blackhead Remover with LED Screen User Manual
- June 8, 2024
- DOSEAO
Table of Contents
** _ _DOSEAO logo __** User Manual
Blackhead Remover wi:h LED Scree
DOSEAO BHR-N22001 Blackhead Remover with LED Screen
Dear customer, thanks for purchasing this product. Please read this user
manual carefully and follow the correct instructions.
Product Introduction
The Blackhead Remover with LED Screen is the upgraded version of previous
models. It adopts latest high stable negative pressure technology which
produces stronger and more stable suction to effectively remove blackheads,
whiteheads, dead skirt, treat acne,grease and makeup residues. It can increase
blood circulation and skin e lasticity, lessen wrinkle, shrink pores, smooth
fine lines without hurting your skin. Besides, the LED screen clearly shows
modes and battery life based on the theory of artificial intelligence, which
makes the use of the device more convenient. Regularly using the device will
bring back a clearer, tighter and younger face!
Product Overview
| Oval Probe
Increase the elasticity and tightness of skin, reduce fine lines
---|---
| Big Round
Probe Strong suction, easily clean up blackhead/acne and lift skin
| Small Round Probe
Moderate suction, clean blackhead /acne in the wing of nose
| Microcrystalline Probes
Suitable for exfoliation, removing deadskin cells and repair the wrinkle and
acne skin. Applicable for elbow and knee.
Product Features
- Effective to Use: Medical grade air pump removes blackheads, unclogs pores, exfoliates the skin, tightens skin, and reduces fine lines
- Safe to Use: Gentle enough for even sensitive acne skin, dual seal rings keep the probe securely on the device when used to avoid any injuries
- Convenient to Use: Come with 1 button, 3 clean modes, LED screen and battery lasting about 3 weeks on a single charge, low noise produced
- Comfortable to Use: Ergonomic design makes the angle of the probe conform to the face curve, and the body of the device fits snugly into the hand
Noise Index
| Soft| Normal| Strong
---|---|---|---
Load| 51dB| 54dB| 57dB
No Load| 45d B| 47d B| 50d B
Application Methods
Clean your face, use blackhead removing essence and/or facial steamer to open
the pore for better result.
Note: The effect may be affected if the pores are closed. Insert the
isolation pad into the slot at the top of the cleaner, select a certain probe
and install it onto the device. Press and hold the Power Button to turn the
device on. The default mode is Soft Mode. Short press the Power Button to
choose a certain mode.
Note: Test the suction with your forearm before first use. Apply the
probe to your face and slowly move it to remove blackheads.
Note: To avoid injuries, do not allow the probe stay too long on one
place, and do not press it too hard or pull it out vertically. After cleaning,
press and hold the Power Button to turn the device off. Remove the probe from
the device. Wipe the dirt off with cotton swab and clean it with water. Then
towel it dry or wait for natural air dry.
Note: The body of the device is not waterproof Do not rinse the device or
immerse it in water After cleaning, apply skincare products like a facial
mask, cream, toner, etc. to your face.
Charging Methods
- The battery symbol flashes when the battery is low, which reminds you to charge the device.
- Connect the device with a 5V/1A adaptor (not included) via the Micro-USB charging cable. Plug into the power supply and start charging.
- The LED screen will light up and the battery symbol will scroll during charging. The solid battery symbol represents the charging is finished.
Specifications
Item Name: Blackhead Remover with LED Screen
Charging Method: Wired Charging (Micro-USB)
Battery Capacity: 600mAh
Continuous Working Time (No Load):
Soft 2.5H; Normal 2H; Strong z 1.5H”
Battery Voltage: 3.7V Low
battery reminder: 3.3V
Low power shutdown: 3V
Charging Voltage: 5V/1A
Output Power: 2.5W(Max)
Rated Current: 1A Noise< 60db
Pressure (Load): Soft: 60Kpa±5Kpa;
Normal: 62Kpa±5Kpa;
Strong : 64Kpa±5Kpa
Package Size: 21511545mm
Package Weight: 250g
Product Weight: 127g
Storage temperature: -10 C -50 C
Working temperature: 0C -40 C
Package list
1 Blackhead Remover with LED Screen
1 Big Round Probe
1 Small Round Probe
1 Oval Probe
1 Microcrystalline Probe
1 Pack of Isolation Pads
1 Micro-USB Charging Cable
1 User Manual
Note
- The battery may run out during long-distant transportation. It’s recommended to fully charge the device before first use.
- For a better pore cleaning effect, it’s recommended to use blackhead removing essence or facial steamer to open the pores before using the device. The pore cleaning effect will be affected by closed pores.
- It’s recommended to test the suction with your forearm before first using it on your face.
- To avoid injuries, do not allow the probe to stay too long in one place, and do not press it too hard or pull it out vertically. Incorrect use may cause facial redness, which will fade away in a few days.
- Do not apply the device to wounds or scars on your skin.
- Please keep the body of the device away from water or other liquid.
- Do not use a chemical cleaner to clean the device, or the device may be corroded.
- It’s recommended to use the device once a week for dry skin and twice for oily skin. Do not use the device for more than 5 minutes every time. Excessive use may cause skin allergies.
- Please clean the probes after each use to avoid the filter being blocked. Use alcohol with a concentration of less than 70% to clean the probes if needed.
- Do not use the device on the delicate skin of children to avoid injuries.
- The device is equipped with a Micro-USB charging cable, and a 5V/1A adapter is not included.